JVC VN-C625 manual Pan/Tilt button, Zoom button and Zoom bar, Angle Step, @ Size, Reduced Screen

8Pan/Tilt button

For adjusting the Pan/Tilt position.

Use Angle Step to set the operating angle for every single operation of the Pan/Tilt button. Set the Pan/Tilt operating speed using the

[Pan/Tilt Setting] item under [Setting]. (☞ Page 71)

9HOME

For moving the camera to the home position.

0Zoom button and Zoom bar

For adjusting the zoom position. The digital zoom function will be activated upon moving the Zoom button all the way to the Tele-end (Zoom = 0) and performing the following procedure.

•Upon clicking the [T] button, digital zoom will function as follows.

#

@

!

0

89

!Angle Step

Sets the degree of angle to move per click when operating using the Pan/Tilt button in 8. Pan/Tilt will operate continuously when this is set to 0 degrees.

@Size

For reducing the display size of the [V.Networks Controller] screen. (See diagram below)

#Pan/Tilt/Zoom Position Indicator

Displays the current Pan/Tilt and Zoom positions.

Note

For starting and stopping operations of Auto Pan, Auto Patrol and Auto Trace, please refer to Page 59.

(x1.5 † x2 † x2.5 † x3)

•Upon clicking the [W] button, digital zoom will function as follows.

(x 3 † x 2.5 † x 2 † x 1.5 † No Digital Zoom)

Reduced Screen

1CAMERA 3 Position Moving

Caution

Digital zoom can only be applied to the image currently being displayed. It will not have any effect on recorded images.

CameraA

Enlarge Display Screen

Compression Mode 8 Pan/Tilt button

81