Operations (Step 5 Setting Using the Web Browser)
5-4 Setting Using the Web Browser (4. PAN/TILT Setting)
PAN/TILT Setting window:
This section describes procedures to perform various PAN/TILT settings.
1
2
Click 
to apply settings and to save the set values.
1PAN/TILT Speed
For performing settings related to the speed of Pan/Tilt operation.
1(Low), 2 to 7, 8(Fast):
For selecting the speed of Pan/Tilt operation. The larger the value, the higher will be the Pan/Tilt speed.
According to ZOOM, speed of operation is made variable.:
Alters the pan/tilt speed automatically according to the zoom of the lens.
The speed lowers when the zoom position is set to the
Click 
to apply settings without saving the set values. These settings will be cleared upon turning off the power of
2Auto Flip
Inverts images on the screen according to the camera angle. Set this function when shooting an object that passes beneath the camera.
OFF : Auto Flip is disabled.
Mode 1 : The image rotates 180˚ horizontally and stops when the object comes beneath the camera. In this case, the camera and pan/tilt operations function in the same direction.
Mode 2 : The image rotates 180˚ horizontally when the object comes beneath the camera, and direction of the camera and pan/tilt operations function in opposite direction. Set this function to enable continuous operation.
Mode 3 : The image rotates 180˚ horizontally when the object comes beneath the camera. The camera and pan/tilt operations, which are in opposite directions to each other, will be aligned upon a lapse of at least 10 seconds.
98