JVC VN-C625 manual Agc, Manual Focus Level, Iris Mode, AveragePeak

1Focus

For selecting the mode of focus.

Easy Auto Focus : Focus will be adjusted automatically

upon performing Pan/Tilt or Zoom operations on the camera.

Manual : Adjust focus manually.

2Color Level

Adjusts the color level of video signals. (Set value: -5 to 5)

3Enhance Level

Sets the contour enhancement which controls the sharpness on the monitor screen. (Set value: -5 to 5)

4Pedestal Level

Sets the pedestal level (black level) of video signals.

(Set value: -5 to 5)

5AGC:

Sets the maximum gain of the AGC (Auto Gain Control), which electronically increases the gain when the object is under low light conditions.

(Set value: OFF, 10 dB, 20 dB)

6Shutter

Sets the speed of the shutter.

(Set value : 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000)

7Manual Focus Level

For adjusting focus when [Focus] in 1is set to "Manual". Focus will be set on a nearer object when the value decreases, and on a distant object when the value increases.

(Set Value: 0 to 100)

Click the [One-push AF] button to enable automatic focus.

8Iris Mode

For performing setting related to lens iris adjustment.

Auto : Adjusts iris automatically to the default state.

Manual : Adjust iris manually.

Auto+ : Adjusts iris automatically to a level brighter than the default state.

Auto- : Adjusts iris automatically to a level darker than the default state.

9White Balance

For setting the white balance, which provides a color standard.

ATW : Adjusts the white balance automatically according to the color temperature of the lighting.

AWC : Adjusts the white balance automatically. R Gain: Adjusts the hue of R (red) when in the AWC mode. (Set value: 0 to 100)

B Gain: Adjusts the hue of B (blue) when in the AWC mode. (Set value: 0 to 100)

0Average:Peak

Sets the method of exposure detection according to ratio between the average and peak values.

(Set value: 10:0, 9:1, 8:2, 7:3, 6:4, 5:5)

!BLC

Sets the backlight compensation function. Use this setting when an object appears dark using the Auto Iris function due to the presence of a bright light source behind the object.This function makes it possible to place an unnecessary light source outside the photometry area.

(Set value: OFF, Area 1 to Area 4)

Note

For details on settings and set values, refer to "Image Quality Setting" (☞ Page 64, 65).

97