JVC VN-C625 Function/Set Value, Alarm 1/Alarm, Detect Mode, Alarm Output, Go to a preset

Page 38

Settings (Step 2 Network Settings)

2-4 Other Settings Using the "VN-C625U Setup Tool" (3. Alarm Setting) (Continued)

 Alarm Input

 

Item

 

Function/Set Value

Initial Value

1 Alarm 1/Alarm 2

This section describes setting procedures for alarm input.

—

 

Mode

For selecting whether to enable or disable the input signals.

Not Available

 

 

Set Values : Available, Not Available

 

 

Detect Mode

For selecting the method for detecting input signals.

Make

 

 

Make : Detect input signals at the "Make" contact point.

 

 

 

Break : Detect input signals during "Break".

 

 

 

Toggle : Detect input signals at both "Make" and "Break".

 

 

Alarm Output

For selecting whether to output from the alarm output terminal

Not Available

 

 

when there is alarm input.

 

 

 

Not Available : Do not output from the alarm output terminal.

 

 

 

Alarm Output 1 : Send output from the Alarm Output 1 terminal.

 

 

 

Alarm Output 2 : Send output from the Alarm Output 2 terminal.

 

 

 

Note

 

 

 

 

• Unless the alarm output in the "Alarm Output" tab is enabled,

 

 

 

this function will not be activated even if alarm output is

 

 

 

selected in the alarm input settings. (☞ Page 41)

 

 

 

 

 

 

Go to a preset

For setting whether to move to the preset position when there

Not Available

 

position

is alarm input.

 

 

 

 

Not Available : Do not move to the preset position.

 

 

 

Home

: Move to the home position.

 

 

 

1 to 99

: Move to the preset position.

 

 

Return Mode

For setting whether to return the camera that has moved to the

Not Available

 

 

preset position upon the alarm input back to the home position.

 

 

 

Use [Return Interval] to set the time interval before returning

 

 

 

the camera to its home position.

 

 

 

Not Available : Do not return to home position.

 

 

 

Return

: Return to home position.

 

 

 

Event

: Return to home position if operation is not in

 

 

 

 

the manual mode.

 

 

Interval

For setting the time interval before the camera returns to its

0

 

 

home position when [Return Mode] is set to "Return".

 

 

 

Set Value : 0 to 65535 sec

 

 

Black & White

For switching from the Color to Black & White mode when there

Not Available

 

 

is alarm input.

 

 

 

 

Not Available

: Do not switch between Black & White/Color mode.

 

 

 

Color

: Color mode at all times.

 

 

 

Black & White : Black & White mode at all times.

 

 

 

Auto

: Switch automatically between Black & White

 

 

 

 

and Color mode according to the brightness

 

 

 

 

of the object.

 

Note

•When Auto is selected, switching may fail in some cases due to the lighting conditions or angle of view. In order to ensure that switching is properly performed, it is recommended that signals from an external sensor (sold separately) be input to the alarm terminal of this camera.

38

Page 37 Page 39
Image 38
Page 37 Page 39
Contents VN-C625 Safety Precautions Important Safeguards Contents Introduction Preparation SettingsOperating Using a Web Browser Setting Using the V.Networks ControllerOperating Using the V.Networks Controller OperationCharacteristics Operating Precautions Consumable Parts  Zooming operationOperating Precautions Items Included Latest UpdatesPC Specifications Operating EnvironmentName and Function of Parts Clamping Holes x Fastening Hook for Safety WireCeiling Mount Camera Terminal Side # Camera Clamping BracketNetwork Connection Connection ExamplesLAN Connection Peer-to-Peer ConnectionPreparation Procedure Set the camera in the following procedureRemove the cover Connecting CablesMake a hole in the ceiling Attach the cover Lead the cable through the coverConnect the cable to this camera  Alarm Input Terminal Connecting CablesCable Specifications Output Requirements Connecting a 5C-2V or 3C-2V coaxial cable Connection of Coaxial CablesDisconnect the connector from the sup- plied Converter Unit Connecting multiple VN-C625 CamerasAttach safety wire to prevent camera from falling down Attachment of Ceiling MountFront List of Tested CF Cards Inserting the CF cardAttach the CF cover dismantled in Step Installing the Camera Fasten the locking screw Installing the CameraTurn the camera Installing the VN-C625U Setup Tool Installing the SoftwareInstalling the V.Networks Controller Setting PCs IP Address Windows XP ClickSelect Internet Protocol TCP/IP and click Properties Click on the Local Area Connection Properties screenSetting PCs IP Address Windows Click Settings Network Settings Check settings Start up the V.Networks Controller.Other Settings Using the VN-C625U Setup Tool Authorization Level Allowed Access Following confirmation screen will be displayedOther Settings Using the VN-C625U Setup Tool 2. Multicast Multicast Multicast Address Search screen is displayed Start up the VN-C625U Setup Tool V.Networks Search screen is displayed Search result is displayedStart up the VN-C625U Setup Tool and select Alarm Alarm InputOperation when an alarm input is activated Page Alarm Output Alarm 1/AlarmDetect Mode Go to a presetRelay Alarm Alarm 1/Alarm Message PacketAlarm FTP Available Other Triggers Preset PositionPosition Return Mode List Alarm Output Example Setting the Trigger Recording screenSetting the Frame Rate screen Recording files Setting the Advance screenRecording time Start up the VN-C625U Setup Tool and select Private Mask When all the settings have been completed, click to endWhen setting is complete, click Fixed area Free areaPerform area setting Other Settings Using the VN-C625U Setup Tool 8. Web Displaying still images uploaded to the /user folderOther Settings Using the VN-C625U Setup Tool 9. FTP Server Start up the VN-C625U Setup Tool and select FTP ServerRec File Continuous FTPTrigger FTP Transfer error PasswordError recovery Connection error Alarm FTP Upload SettingMode Black and White TimeLight One Push AFAuto Level Start up the VN-C625U Setup Tool and select Time When NTP is usedStart up the VN-C625U Setup Tool and select Memory Info Start up the VN-C625U Setup Tool and select Auto ReturnNormal High SpeedConnect to VN-C625 Settings Setting Using the V.Networks Controller Starting Up V.Networks ControllerFeatures that Allow Setting Using the V.Networks Controller 5Help About Features that Allow Setting Using the V.Networks Controller4Setting Quality Motion Detection Standby Select File and Motion Detection Standby Select a cameraSelect View Specify Image Size and Upside Down settings Image Size and InversionImage Quality Setting Image Quality Setting  Image Quality Setting Set value Average PeakLarge Peak value ShutterImage Quality Setting  Lens Select Setting and Frame rate Set the Frame Rate Frame RatePreset Position Setting Select Setting and Position MemoryAlarm Setting Alarm Setting Variable Pan/Tilt SettingPan/Tilt Speed Speed 1 to SpeedAuto Pan Setting Select Setting and Auto Pan SettingPerform setting Close the windowAuto Patrol Setting Select Setting and Auto Patrol SettingAuto Patrol No Start to memorize operation Auto Trace SettingSelect Setting and Auto Trace Setting Close the window Select Setting and Time Stamp Perform setting Time StampChanging Registered Information Select Setting and Property Perform settingWhen alteration is complete, click Buttons for position moving Snap ShotZoom button and Zoom bar # Pan/Tilt/Zoom Position IndicatorPan/Tilt button Angle StepClick the Stop button Record/StopClick the REC button Motion Image WindowPlayback Playback Click Playback screen is displayed Record/Playback Time Image Size Data Size Per Image Approximate Recording TimeSnap screen will be displayed SnapshotClick the Snap Shot button Save As screen is displayedLAN Environment Web Page ImagesAccess Authorization Level Authentication of Access AuthorizationTop page will be displayed Starting Up the Web BrowserStart up the web browser Top Setting Using the Web BrowserDisplay the Top Settings page will be displayed Setting Using the Web Browser 1. Other Settings Other settingsSetting Using the Web Browser 1. Other Settings Http port number, check using the setup tool supplied # NTP SettingsSetting Using the Web Browser 2. Control Setting Using the Web Browser 3.Image Setting Manual Focus Level Iris ModeAGC AveragePeakAccording to ZOOM, speed of operation is made variable Setting Using the Web Browser 4. PAN/TILT Setting1Low, 2 to 7, 8Fast Setting Using the Web Browser 5. Position Memory Setting Image Settings Screen100 Setting Using the Web Browser 6. View SettingResolution Setting Using the Web Browser 7. Alarm Setting 101 Alarm Out Setting Using the Web Browser 8. FTP Setting 103Setting Using the Web Browser 8. FTP Setting Setting Using the Web Browser 9. Auto Pan Setting Duration Setting Using the Web Browser 10. Auto Patrol SettingPosition Number 106For setting image quality Setting Using the Web Browser 11. Auto Trace SettingRecord Start Confirmation Screen Image Settings Screen 107108 Setting Using the Web Browser 12. Black & White SettingSetting Using the Web Browser 13. Schedule Setting Setting Using the Web Browser 14. Private Mask Setting Mask Position and Size Controller 109Right Side Left Side Setting Using the Web Browser 15. Limit SettingFunction Tilt Limit111 Setting Using the Web Browser 16. Auto Return SettingReturn Action Viewing Still Images 112Viewing Live Images 113114 Image LinkDisplaying a still image 115 TroubleshootingSymptom Causes/Remedial Actions Troubleshooting 116Lens SpecificationsCamera Rotating Table Pan/Tilt Mechanism General Ceiling Mount Hole Unit mm VN-C625 Dome Type Network Camera
Top Page Image Contents