JVC KY-F58 instruction manual Monitor Adjustment, Ver. only

Open the cover and switch the Lock switch to OFF.

4. BASIC ADJUSTMENTS BEFORE USE (Be sure)

MONITOR ADJUSTMENT

AC- INPUT	SEE INSTRUCTION MANUAL	RS-232C		EXT REF			OUTPUT
				VD	HD/VBS	VIDEO	Y/C
		LENS		EXT TRIGGER
		REMOTE	FLASH	WEN	FREEZE	MONITOR	RGB/COMPONENT
					1.

	2.		3.					To Monitor
						CAMERA CONTROL UNIT KY-F58
	LOCK	MENU	ITEM+	DATA+		FILES		FREEZE
					1	2	3	4
	ON
			BARS
1 2 3 4	RESET	SET	ITEM-	DATA-	SELECT			MEMORY
ON	OFF							POWER
TO CAMERA		WHITE PAINT					VIDEO LEVEL

SET	FULL AUTO	LEVEL
		ON

RB

OFF

PAINT

SMPTE type color bars [U Ver.]

White	Yellow	Cyan	Green	Magenta		Red		Blue
1	2	3	4	5		6		7
Blue	Black	Magenta	Black	Cyan		Black		White
8	9	10	11	12		13		14
Blue	White		Black
15		16	17		18	19	20	21

EBU type color bars [E Ver.]

White Yellow Cyan Green Magenta Red Blue Black

1 2 3 4 5 6 7 8

Perform the adjustments for color, contrast and luminance by displaying the color bar signal built into the KY-F58 on the moni- tor.

1. Connect a color video monitor to the VIDEO OUPUT termi- nal of the KY-F58.

2.

3. Press the “ITEM+” button to output the color bar signal (the color bar conforms to the SMPTE [U Ver.] or EBU [E Ver.] )

4. While displaying the color bar, set the BLUE CHECK of the monitor to “ON”.

The screen becomes blue only mode and color bar becomes blue stripe pattern.

5. [U Ver.]

Turn the CHROMA adjustment volume on the monitor to adjust the color bar so that the brightness of 1 and 8 , and 7 and 14 become the same.

[E Ver.]

Turn the CHROMA adjustment volume on the monitor to adjust the color bar so that the brightness of 1 and 7 become the same.

6. [U Ver.]

While the BLUE CHECK is ON, turn the PHASE adjust- ment volume of the monitor to adjust the color bar, so that the brightness of 3 and 10 , and 5 and 12 become the same.

[E Ver.]

While the BLUE CHECK is ON, turn the PHASE adjust- ment volume of the monitor to adjust the color bar, so that

the brightness of 3 and	5	become the same.
7. [U Ver.]	1 and 8 , and 7 and 14 change
In case the brightness of
when carrying out the PHASE adjustment, start the proce-
dure again from step 4 .
[E Ver.]
In case the brightness of	1	and 7 change when carrying

out the PHASE adjustment, start the procedure again from step 4 .

8. Set the BLUE CHECK of the monitor to OFF to return to the normal screen (to display all colors, R, G and B).

9. [U Ver.] only

Adjust the BRIGHT adjustment volume of the monitor, so that 18 and 19 disappear and 20 becomes visible.

10.When the adjustment is completed, press the “ITEM+” but- ton again to return to the normal screen.

12Revised in August 1998