JVC KY-F58 instruction manual Process Screen, Master, Black, Knee, Point

6. SETTING ON THE MENU SCREEN (Cont’d)

PROCESS SCREEN

	Item		Functions and operation		Variable values
DETAIL		It adjusts the emphasis level of the contour (DETAIL).			+99
		To make the contour (DETAIL) sharp : Increase numbers.			to
		To make contour (DETAIL) soft		: Decrease numbers.	NORMAL
					to
					–99
					OFF
MASTER		This adjusts the pedestal level(master black) which is the standard black level			+99
BLACK		when a lens cap is put on. When the pedestal level is increased, the whole screen			to
		becomes brighter.			NORMAL
		To increase the pedestal level: Increase the numbers (UP)
					to
		To decrease the pedestal level: Decease the numbers (DOWN).			–99
NEGA		This outputs the reversed video signal of the output terminal.			OFF
		OFF : Reverse is not carried out.			ON
		ON	: Reverse is carried out.
AUTO KNEE		It sets the AUTO KNEE function which compresses the video signal above a			OFF
		certain level to display the gradation of the high lighted section. To check an			ON
		image with the gradation of a bright section, adjust the KNEE POINT manually.
		OFF	: AUTO KNEE function is not carried out.
		ON	: AUTO KNEE function is carried out.
	KNEE	It varies the KNEE POINT where the compression starts.			100%
	POINT	(This is available only when the AUTO KNEE is set to OFF.)			95%
		To increase the KNEE POINT level		: Increase the numbers.	90%
		To decrease the KNEE POINT level : Decrease the numbers.			85%
		When decreasing the number, the gradations at the high luminance level become
		clearer.
WHITE CLIP		It varies the point of the max. value in accordance with the high level video signal.			110%
		To increase the white clip point : Increase the numbers.			105%
		To decrease the white clip point : Decrease the numbers.			100%

23