JVC KY-F58 instruction manual Camera Control Panel side Cont’d

Page 6

2. CONTROLS, INDICATIONS AND CONNECTORS (Cont’d)

Camera Control [Panel side] (Cont’d)

12Set up switch

This switch changes the FILE setting and the RANDOM TRGGER setting. Change the setting according to the de-

18 [VIDEO LEVEL FULL AUTO] full auto button and its LED

This adjusts the video level automatically by varying iris,

shutter speed and GAIN (electrical sensitization) automati-

sired use.

c 1 2 3 4

ON

SW1, 2 FILE setting

Refer to "FILE SETTING" on page 15.

SW3 RANDOM TRIGGER setting

Refer to "Random Trigger Function" on page 28.

SW4 Not available

cally according to the brightness of an object.

The LED light during Full/Auto mode. Each time the button is

pressed, the ON/OFF function operates in turn.

• Auto adjustment for iris can be performed only when an

auto iris lens is used and the LENS item is set to AUTO.

• Max. GAIN value for the ALC can be set at the MENU

screen.

13COVER

To carry out the menu operation, pull the cover towards you to open it.

14[TO CAMERA] camera connector

Connect the camera head with the provided cable (5m).

1

25

6	10 Connector view from the main unit front

1115 (20-pin connector, female)

1619

20

Pin No.	Signal	Pin No.	Signal

1	GND	11	CS LE
2	WEN	12	IRIS CTL/IRIS Y
3	B	13	–10V
4	CLK	14	–5V
5	DATA	15	R
6	CS HE	16	VIDEO SHIELD
7	SHCT	17	20V
8	IFHB	18	15V
9	IFVS	19	5.5V
10	G	20	LENS GND

15[PAINT R] paint R adjust knob

This is the knob which adjusts the R(Red) level of the paint and manual white balance.

Turning the knob to the right will increase red.

For the adjust knob 15 and 16 , refer to the “MANUAL OP- ERATION” on page 17.

16[PAINT B] paint B adjust knob

This is the knob which adjusts the B (Blue) level of the paint and manual white balance.

Turning the knob to the right will increase blue .

17[WHITE PAINT SET]

When this button is pressed, it becomes AUTO WHITE mode.

Refer to the “WHITE BALANCE ADJUSTMENT” on page 13.

For the 18 and 19 , refer to the “MANUAL OPERATION” on page 17.

19[LEVEL] video level adjust knob

This knob varies video level. Turning it to the right increases the video level and turning it to the left reduces the video level.

6

Image 6

Contents KY-F58 Information for USA GREEN-AND-YELLOW Blue BrownFeatures Precautions on Proper USE Introduction Unique phenomenon of CCD CONTROLS, Indications and Connectors Camera Control Panel side Cont’d Camera Control Rear side Cont’d Camera Head Basic Systems Recommended Remote ControllersConnections Mounting the Optional Lens T14 X 5.5MD to the Camera Head How To Mount The Bracket HOW to Mount the Camera HeadConnecting the Camera Head and CCU Camera Control Unit HowTo MountThe Camera To start a flash light with a foot switch System ApplicationHD/VBS Monitor Adjustment VerVer. only White Balance Adjustment How To SetError Over Light excess of light White Shading Adjustment Full Time AUTO-WHITE FunctionFile Setting OperationFile Setting Cont’d Initial Values of Scene File aManual Operation Menu Operation Setting on the Menu ScreenHow To Operate Menu Screen FlowVideo Level Screen White Balance Screen Video Level Screen Cont’dFreeze Screen White Balance Screen Cont’dFreeze Screen Cont’d Selection the Freeze itemBlack Process ScreenMaster KneeFlarer Process Screen Cont’dGamma FlarebTotal Setting Screen Others Normal Field Mode High Resolution Frame strage Mode Reading every line Technical Information Slow Shut Function When the Slow Shut is set to 3FRMTechnical Information Cont’d ALC and EEI Operations Flash Function Sync Non Reset ModeSync Reset Mode Random Trigger FunctionSync SpecificationsRGB/COMPONENT EXT TriggerBracket is mounted Specifications Cont’dCamera head CCU Camera Control