Total Setting Screen

6. SETTING ON THE MENU SCREEN (Cont’d)

Item		Functions and operation	Variable values

D-SUB OUT	This selects the signals output from the RGB/COMPONENT output connector on		RGB
	the rear panel of the KY-F58.		COMPONENT
	RGB	: RGB signal is output.
	COMPONENT : Y/R-Y/B-Y signals are output.

ON SYNC	It sets the SYNC signal to add to the RGB signals output from the RGB/COMPONENT		OFF
	output connector on the rear panel of the KY-F58. (Only available when the D-SUB		G
	OUT is set to RGB.)		RGB
	OFF : SYNC signal is not added.
	G : SYNC signal is added only at G singnal.
	RGB : SYNC signal is added to all R, G, B signals.

LENS	This sets whether to control a connecting lens; from the LENS REMOTE connector		CONTROLLER
CONTROL	on the rear panel of KY-F58 or from RS-232C connector.		RS-S3SC
	The CONTROLLER: LENS is controlled from the LENS REMOTE connector.
	The RS-232C: LENS is controlled from the RS-232C connector.

CABLE	Set this according to the cable length between camera head and camera control		5M
LENGTH	unit (CCU).		10M
	If the setting is wrong, normal video output may not be obtained.		15M
			20M
			25M

INDICATOR	It sets whether to display the values of GAIN, SHUTTER and IRIS on each output		OFF
	connector.		ON
	OFF : No display
	ON	: Display

H PHASE	It adjusts the horizontal phase when synchronization is carried out at EXT REF		+127
	connectors (HD/VBS and VD) on the rear panel of the KY-F58.		to
			0
			to
			–128

SC COARSE	This carries the SC COARSE adjustment when the phase for the VBS signal input		0
	from the HD.VBS connector on the rear panel of the KY-F58 is synchronized.		90
	Carry it out together with the SC FINE adjustment.		180
			270

SC FINE	By carrying out together with the SC COARSE adjustment, it finely adjusts the sub		+127
	carrier.		to
			0
			to
			–128

Note:

The data set at the TOTAL SETTING is common to all files.

TOTAL SETTING SCREEN

RS-S3SC