JVC KY-F58 instruction manual CONTROLS, Indications and Connectors

2. CONTROLS, INDICATIONS AND CONNECTORS

Camera Control [Panel side]

			6	8	9
		LOCK	MENU	ITEM+	DATA+
		ON
				BARS
1 2 3 4	RESET		SET	ITEM-	DATA-
ON		OFF
12	11	10	7		5		4	3	2
						CAMERA CONTROL UNIT KY-F58
	PULL OPEN			MENU		FILES			FREEZE
					1	2	3	4
13					SELECT			MEMORY
									POWER

TO CAMERA WHITE PAINT VIDEO LEVEL

SET FULL AUTO LEVEL

ON

RB

14 OFF

1

PAINT

15	16	17	18	19
1 [POWER] power switch and its LED			7 [SET] set button.

This is the ON/OFF power switch. When power is supplied the LED light.

2[FREEZE] freeze button and its LED

The video signal can be frozens by this button.

When the freeze button is pressed, the LED light. When the freeze is released, the LED turns off.

Refer to the “MANUAL OPERATION” on page 17.

3[MEMORY] memory button

Select one of the FILES LEDs, No. 1 to 4 4 with the SE- LECT button 5 . Then press and hold MEMORY button for more than 2 seconds to register the value set at the MENU screen to be the selected file.

Refer to the “FILE SETTING” on page 15.

4[FILES] file selected LEDs

When the [SELECT] button 5 is pressed, the LED for the selected file lights. Each time the SELECT button is pressed, the file LED changes 1 2 3 4 in turn.

For the 5 to 10 , refer to the “6. SETTING ON THE MENU SCREEN” on the page 18.

5[SELECT] select button

Each time this button is pressed, the file changes.

6[MENU] menu button

When this button is pressed, “on screen” signals are output from connectors 20 , 21 and 22 to display the MENU screen. When again pressing this button, the normal screen is re- sumed.

To choose the item on the MENU screen, press this button to display the sub-menu screen.

8[ITEM+ (BARS), ITEM–] item buttons

•When ITEM+ button is pressed on the normal screen, the color bar signal is output from output connectors 20 , 21 and 22 . When pressing this again, it returns to the normal screen.

•When the menu screen is displayed ,the required item can be selected.

9[DATA+, DATA–] data buttons

When the menu screen is displayed, data of each item can be changed.

For the step 5 to 9 , refer to “6. SETTING ON THE MENU SCREEN” on the page 18.

10[LOCK] lock switch

When the lock switch is “ON”, all functions except the Power switch 1 , the Freeze button 2 , and the select button 5 cannot be operated.

11[RESET] reset button

When this button is pressed, the set values for each FILE are reset to the initial values set at factory.

Refer to “RESET” on the page 16.

see subsection 1.6.2 of this service maual

5