JVC KY-F58 instruction manual Operation, File Setting

5. OPERATION

FILE SETTING

There are four scene files to be set by dip switch depending on the operating conditions.

Scene File A including four sub files are all set to the standard shipment setting values. Change the settings according to the requirements. Scene File B, C and D should be set to required file settings before use such as Slit inspection, Microscope 1 , Microscope 2 , etc.

Note:

Before carry out operations below, make sure the LOCK switch is turned OFF.

Scene File Setting

Select the “Scene File” with the dip switch 1 and 2 according to the purposes.

DIP switch SELECT button

Scene File

A

		Dip switch setting		Example for use
	1 2 3 4		1. OFF	Standard
ON			2. OFF
				setting
			3, 4. Do not switch over

		LOCK	MENU	ITEM+	DATA+
		ON
				BARS
1 2 3 4	RESET		SET	ITEM-	DATA-
ON		OFF

TO CAMERA	WHITE PAINT
SET
R	B

CAMERA CONTROL UNIT KY-F58

	FILES		FREEZE
1	2	3	4
SELECT			MEMORY
			POWER
		VIDEO LEVEL
	FULL AUTO		LEVEL
			ON
			OFF

B

C

D

	1 2 3 4	1. ON	Slit
ON		2. OFF
			Inspection
		3, 4. Do not switch over
	1 2 3 4	1. OFF
ON		2. ON	Microscope 1
		3, 4. Do not switch over
	1 2 3 4	1. ON
ON		2. ON	Microscope 2
		3, 4. Do not switch over

PAINT

Note:

Switch off the power when switching the Scene File over. If it is carried out while the power is ON, it will not be changed.

Changing setting	MEMORY button
values

							CAMERA CONTROL UNIT KY-F58
		LOCK	MENU	ITEM+	DATA+		FILES		FREEZE
						1	2	3	4
		ON
				BARS
1 2 3 4	RESET		SET	ITEM-	DATA-	SELECT			MEMORY
ON		OFF							POWER
TO CAMERA			WHITE PAINT					VIDEO LEVEL

SET	FULL AUTO	LEVEL
		ON

RB

OFF

PAINT

FILE Setting

Each Scene File has four of sub files (FILE) to be set.

Each time the SELECT button is pressed, it is switched in the order of

FILE1 FILE2 FILE3 FILE4.

It takes 1 second to switch over the FILE. LED blinks rapidly during the FILE switching operation.

Note:

Do not perform other operations during the LED blinking, it may cause the KY-F58 to malfunction.

The FILE setting is completed when the LED stops blinking, and lights.

Changing setting values

The setting value is changed for each file.

Refer to the “6. SETTINGS ON THE MENU SCREEN” on page 18.

Registration to the FILE

Setting values can be registered to each FILE.

Press the MEMORY button for 2 sec. or more for registration. The setting value is registered to the FILE which LED lights. It takes approx. 2 sec. for registration. During the registration, the LED blinks slowly.

The FILE registration is completed when the LED stops blink- ing, and lights.

Note:

•To register a value which has been changed on the MENU screen or with a volume level knob, make sure to register any changes in the selected file. If the power is turned off without registering the changes, they will be automatically erased.

•Do not perform other operations during the LED blinking, it may cause the KY-F58 to malfunction.

15