JVC JY-HD10 Using AC Power, About Batteries, Cause a fire or explosion, For other notes,  pg

EN 11

Using AC Power

Open the cover.

To DC connector

To AC outlet

Power cord

AC Power Adapter/

Charger

To DC OUT

connector

DC cord

1Make sure you unplug the camcorder’s DC cord from the AC Power Adapter/Charger.

2Plug the AC Power Adapter/Charger’s power cord into an AC outlet. The POWER indicator lights.

3Plug the DC cord jack with smaller diameter to the camcorder’s DC connector.

4Plug the DC cord jack with larger diameter to the DC OUT connector on the AC Power Adapter/ Charger.

NOTES:

●The provided AC Power Adapter/Charger features automatic voltage selection in the AC range from 110 V to 240 V.

●For other notes,  pg. 67.

About Batteries

Lithium-ion is vulnerable in colder temperatures.

DANGER! Do not attempt to take the batteries apart,	STARTED
or expose them to flame or excessive heat, as it may	GETTING
cause a fire or explosion.
WARNING! Do not allow the battery or its terminals
to come in contact with metals, as this can result in
a short circuit and possibly start a fire.

The Benefits Of Lithium-Ion Batteries Lithium-ion battery packs are small but have a large power capacity. However, when one is exposed to cold temperatures (below 10°C), its usage time becomes shorter and it may cease to function. If this happens, place the battery pack in your pocket or other warm, protected place for a short time, then re-attach it to the camcorder. As long as the battery pack itself is not cold, it should not affect performance.

(If you’re using a heating pad, make sure the battery pack does not come in direct contact with it.)

For other notes,  pg. 67.