JVC JY-HD10 Special Effects, Program AE can be changed during recording or, During Record-Standby

		EN 49
TWILIGHT: Makes evening scenes look more		Special Effects
natural. White Balance ( pg. 46) is automatically
set to “ ”, but can be changed to your desired
	Using the following 4 Effect Modes allows you to
setting. When Twilight is chosen, the camcorder
automatically adjusts the focus from approx. 10 m	provide special effects for your shooting.
to infinity. From less than 10 m, adjust the focus		SEPIA: Recorded scenes have a brownish tint
manually.
	like old photos. Using this effect with “DV WIDE”
1 Set the Recording Mode Switch to “HD”, “SD” or	set to ”16:9SQ” ( pg. 36) provides “classic film”
	effect.
“DV”.		MONOTONE: Like classic black and white
● Some modes of Program AE cannot be used
	films, your footage is shot in B/W. Using this effect
with the Recording Mode Switch set to
	with “DV WIDE” set to ”16:9SQ” ( pg. 36)
“MEMORY”.
	provides “classic film” effect.
2 Set the Power Switch to “M” while pressing down
		CLASSIC FILM: Gives recorded scenes a
the Lock Button located on the switch.
	strobe effect.
3 Open the LCD monitor fully, or pull out the
		STROBE: Your recording looks like a series of
viewfinder fully.
	consecutive snapshots.
4 Press P.AE. The PROGRAM AE screen appears.
	NOTES:
5 Rotate the MENU Wheel to select the desired
mode, and press it.	● When the Recording Mode Switch is set to “HD”
		or “MEMORY”, “MONOTONE” is only available.
6 Press the MENU Wheel in to activate the selected
	● “SEPIA”, “CLASSIC FILM” and ”STROBE” are not
effect.		activated when the recording mode is set to “HD”.
● The selected effect indicator appears.	1 Set the Recording Mode Switch to “SD” or “DV”.
To deactivate the selected effect…
		● Some modes of Special Effects cannot be used
Select “OFF” in step 5. Or, set the Power Switch to
		in “HD” or “MEMORY” mode.
“A”.
	2 Set the Power Switch to “M” while pressing down
NOTE:
		the Lock Button located on the Switch.
Program AE can be changed during recording or	3 Open the LCD monitor fully, or pull out the
during Record-Standby.
		viewfinder fully.

FEATURES

IMPORTANT:

Some modes of Program AE cannot be used with certain Wipe/Fader effects. If an unusable mode is selected, the indicator of Wipe/Fader effects blinks or goes out.

4Press EFFECT. The EFFECT screen appears.

5Rotate the MENU Wheel to select the desired mode, and press it.

6Press the MENU Wheel in to activate the selected effect.

● The selected effect indicator appears.

To deactivate the selected effect...

Select “OFF” in step 5. Or, set the Power Switch to “A”.

IMPORTANT:

ADVANCED

Some modes of Special Effects cannot be used with certain Wipe/Fader effects. If an unusable mode is selected, the indicator of Wipe/Fader effects blinks.