JVC JY-HD10 manual Resetting The File Name, Folder and File names, Press it. The Sub Menu

EN 31

Resetting The File Name

By resetting the file name, a new folder will be made. The new files you are going to make will be stored in the new folder. It is convenient to separate the new files from previously made files.

1Load a memory card. ( pg. 17)

2Set the Playback Mode Switch to “MEMORY”.

3Set the Power Switch to “P” while pressing down the Lock Button located on the switch.

4Open the LCD monitor fully, or pull out the viewfinder fully.

●The still image which has been played back at the last time is displayed.

5Press the MENU Wheel in. The Menu Screen appears.

6Rotate the MENU Wheel to select “NO. RESET”, and press it. The NO. RESET screen appears.

7Rotate the MENU Wheel to select “EXECUTE”, and press it. The new folder (such as “101JVCGR”) will be made and the file made of the next shot starts from DVC00001.

Folder and File names

Each time shooting takes place, a file name is made using a number which is larger by one than the largest number of the file names which are in use. Even if you delete an image file with a number in the middle of range, the number will not be used for a new shot; a gap will remain in the numerical sequence. If the file name reaches DVC09999, a new folder (such as “101JVCGR”) will be made and the file name will start again from DVC00001.

Setting Print Information (DPOF Setting)

This camcorder is compatible with the DPOF (Digital Print Order Format) standard in order to support future systems such as automatic printing. You can select one of the 2 print information settings for images stored in the memory card: “To Print All Still Images (One Print For Each)” or “To Print By Selecting Still Images And Number Of Prints”.

NOTES:

●If you load a memory card already set as shown below in a printer compatible with DPOF, it will make prints of the selected still images automatically.

●To print images recorded on a tape, first dub them to a memory card. ( pg. 55)

To Print All Still Images (One Print For Each)

1Load a memory card. ( pg. 17)

2Set the Playback Mode Switch to “MEMORY”.

3Set the Power Switch to “P” while pressing down the Lock Button located on the switch.

4Open the LCD monitor fully, or pull out the viewfinder fully. The still image which has been played back at the last time is displayed.

5Press the MENU Wheel in. The Menu Screen appears.

6Rotate the MENU Wheel

to select “DPOF”, and		MENU
press it. The Sub Menu	DPOF CURRENT
appears.			ALL 1
			RESET
7 Rotate the MENU Wheel			RETURN
to select “ALL 1”, and
press it. The DPOF screen
appears.
8 Rotate the MENU Wheel		DPOF
to select “EXECUTE”, and
press it. The normal
playback screen appears.		ALL 1 ?
● To cancel selection,
		EXECUTE
select “RETURN”.		RETURN

RECORDING & PLAYBACK

DIGITAL STILL CAMERA (D.S.C.)

CONTINUED ON NEXT PAGE