JVC JY-HD10 78 EN, How To Handle a CD-ROM, About moisture condensation, Serious malfunctioning

Page 78

78 EN

CAUTIONS (cont.)

5. Dirty heads can cause the following problems:

•No picture during playback.

•Blocks of noise appear during playback. •During recording or playback, the Head Clog

Warning indicator “ ” appears. •Recording cannot be performed properly.

In such cases, use the provided cleaning cassette. Insert it and play back. If the cassette is used more than once consecutively, damage to the video heads may result. After the camcorder plays back for about 20 seconds, it stops automatically. Also refer to the cleaning cassette’s instructions.

If, after using the cleaning cassette, the problems still exist, consult your nearest JVC dealer.

Mechanical moving parts used to move the video heads and video tape tend to become dirty and worn out over time. In order to maintain a clear picture at all times, periodic check-ups are recommended after using the unit for about 1,000 hours. For periodic check-ups please consult your nearest JVC dealer.

How To Handle A CD-ROM

•Take care not to soil or scratch the mirror surface (opposite to the printed surface). Do not write anything or put a sticker on either the front or back surface. If the CD-ROM gets dirty, gently wipe it with a soft cloth outward from the centre hole using a circular motion.

•Do not use conventional disc cleaners or cleaning spray.

•Do not bend the CD-ROM or touch its mirror surface.

•Do not store your CD-ROM in a dusty, hot or humid environment. Keep it away from direct sunlight.

About moisture condensation...

You have observed that pouring a cold liquid into a glass will cause drops of water to form on the glass’ outer surface. This same phenomenon occurs on the head drum of a camcorder when it is moved from a cool place to a warm place, after heating a cold room, under extremely humid conditions or in a place directly subjected to the cool air from an air conditioner.

Moisture on the head drum can cause severe damage to the video tape, and can lead to internal damage to the camcorder itself.

Serious malfunctioning

If malfunctioning occurs, stop using the unit immediately and consult your local JVC dealer.

The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery pack, AC Power Adapter/ Charger, etc.) and wait a few minutes and then re- connect it and proceed as usual from the beginning.

Image 78
Contents JY-HD10 Important for owners in the U.K Dear CustomerIt is recommended that you… Some DO’S and DON’TS on the Safe USE of Equipment Above ALLOn the AC adapter AA-V40EG, AA-V40EK On the main unit JY-HD10Before recording an important scene… DC Cord Remote Control UnitCleaning Cassette Memory Card 8 MBHow To Detach/Attach The Lens Hood How To Attach The Core FilterHow To Attach The Strap To detachHow To Attach The Lens Cap How To Use The Audio CableYou cannot attach the lens cap directly to the camcorder When using an interviewing microphone at the same time How To Attach The HandleHow To Use The Pro Pad MIC in switchContents Using The Battery Pack PowerCharging The Battery Pack 10 ENCause a fire or explosion Using AC PowerAbout Batteries For other notes,  pgWhile using the viewfinder Grip AdjustmentWhile using the LCD monitor 12 ENViewfinder Adjustment  pgOperation Mode Power-Linked Operation14 EN Date/Time Settings Built-in Clock’s Rechargeable Lithium BatteryLoading a Cassette Unloading a Cassette Approximate recording time Tape Recording mode16 EN To protect valuable recordings…Loading a Memory Card /Unloading a Memory Card 18 EN Basic RecordingFeatures Recording modes and featuresFeatures for Video Recording Mode Viewfinder on LCD monitor on DV mode HD/SD modeZooming 20 ENTape Remaining Time Journalistic ShootingTime Code Time code cannot be resetWhen a blank portion is recorded on a tape Recording From The Middle Of a TapeNormal Playback To control the speaker volume…22 EN Still PlaybackPlayback Zoom Shuttle SearchSlow-Motion Playback Blank Search24 EN To Connect a Conventional TV or VCRFor S-video or video connection If using a VCR, go to stepIf not, go to step For component video connection26 EN Basic Shooting D.S.C. SnapshotAuto Playback Of Images Normal Playback Of Images28 EN Index Playback Of FilesViewing File Information To protect the currently displayed file Protecting FilesTo Remove Protection CardTo delete the currently displayed file Memory card 30 ENDeleting Files To delete all files stored in the memory cardFolder and File names Resetting The File NameTo cancel selection Press it. The Sub MenuInitialising a Memory Card To Reset The Number Of Prints32 EN To Print By Selecting Still Images And Number Of PrintsFor Video and D.S.C. Recording Menus For Video Playback MenusFor D.S.C. Playback Menus 34 EN Camera MenuManual Menu Self-TimerMaximum telephoto setting Optical Image Stabilisation36 EN System MenuDisplay Menu Picture quality 38 ENDSC Menu Image sizeVideo Menu 40 EN To end Self-Timer recording, select OFF in step Self-TimerSet SELF-TIMER to on .  pg Press Snapshot42 EN Motor Drive ModePress the Exposure Wheel in. Or, set the Power Switch to a Exposure ControlIris Lock Backlight CompensationTo return to automatic iris Control To return to automatic iris adjustment Manual Iris AdjustmentManual Shutter Speed Adjustment 44 ENTo reset to Auto Focus Manual FocusManual Zooming 46 EN White Balance AdjustmentSelect Auto in . Or, set the Power Switch to a To return to automatic white balance…Manual White Balance Adjustment Program AE 48 ENWipe Or Fader Effects SportsDuring Record-Standby Special EffectsProgram AE can be changed during recording or To deactivate the selected effectNavigation Function To cancel Navigation search midway50 EN To make thumbnail images after video recording ManuallyMode, it will enter the playback pause mode Be corrupted if the battery becomes exhaustedIndicator appears briefly During deletion. If the memory card becomesTo use this camcorder as a recorder 52 ENTo use this camcorder as a player Date/timeEquipped With An i.LINK Dubbing To Or From a Video Unit54 EN DV to DV dubbingMPEG2 to MPEG2 dubbing Card is not loaded, the message Copying If an image recorded on the tape using DVDubbing Still Images Recorded On Failed is displayedBeam Effective Area indoor use Installing The Batteries56 EN Buttons And FunctionsSlow-Motion Playback DV only Frame-By-Frame Playback DV onlyPlayback Zoom DV only Playback Special Effects DV only 58 ENAudio Dubbing DV only To hear the sound during Audio DubbingDuring Insert Editing, set the Recording Mode Switch to DV Insert Editing DV onlyRandom Assemble Editing R.A.Edit DV only VCR Code List VCR Brand Name60 EN Set Remote/VCR CodeMake Connections 62 EN Select ScenesAutomatic Editing To VCR Engage the Stop modes for the camcorder and the VCRFor More Accurate Editing Adjustment Of VCR/Camcorder Timing64 EN Diagnosing VCR/Camcorder TimingUsing USB cable Using USB cableUsing i.LINK cable Using i.LINK cableThis camcorder can be used as a WebCam via USB connection 66 ENWebCam You can also use the camcorder for videoItems 68 EN PowerSymptom Possible Causes Corrective Action Video and D.S.C. RecordingViewfinder indications blink Certain modes of Program HD or SD mode when a Disconnect either of twoLCD monitor or Certain Wipe/Fader effects AE, OIS and other AE and OIS.  pgAdvanced features 70 ENPress Back Light Other problems Camcorder When the LCD monitor’sIs discharged 72 EN Than 1 hour until condensation disappears Appears when no tape is loaded  pgIndications Meaning Compatible with this camcorder74 EN Indication remains, consult your nearest JVC dealer Size that is not compatible with this camcorderProtected SD Memory Card loaded Your nearest JVC dealer76 EN General Battery PrecautionsBattery Packs CassettesMain Unit Memory CardsLCD Monitor Do NOT…About moisture condensation How To Handle a CD-ROM78 EN Serious malfunctioningCleaning The Camcorder After Use80 EN USB VTR82 EN Controls IndicatorsConnectors Other PartsDuring Video Recording Only 84 ENLCD Monitor/Viewfinder Indications During D.S.C. Recording OnlyDuring Video Playback 86 EN Program AE Program AE Wide Mode DV WidePlayback sound Recording TimeJY-HD10