JVC JY-HD10 manual 34 EN, Camera Menu

Page 34

34 EN

RECORDING MENUS

Camera Menu

CAMERA

Recording mode

Allows you to set the recording mode (SP or LP) depending on your preference.

REC MODE	(Factory-preset: SP)
SP: Standard Play

LP: Long Play—more economical, providing 1.5 times the recording time.

NOTES:

●Audio Dubbing ( pg. 58) and Insert Editing

( pg. 59) are possible on tapes recorded in the SP mode.

●If the recording mode is switched during recording, the playback picture will be blurred at the switching point.

●It is recommended that tapes recorded in the LP mode on this camcorder be played back on this camcorder.

●During playback of a tape recorded on another camcorder, blocks of noise may appear or there may be momentary pauses in the sound.

Sound mode

DV SOUND

(Factory-preset: 12 bit)

12 bit: Enables video recording of stereo sound on four separate channels, and is recommended for use when performing Audio Dubbing.

(Equivalent to the 32 kHz mode of previous models)

16 bit: Enables video recording of stereo sound on two separate channels. (Equivalent to the 48 kHz mode of previous models)

Zooming

ZOOM	(Factory-preset: 40X)

10X: When set to “10X”, only the optical zoom magnification is engaged.

40X*: Allows you to use the Digital Zoom. By digitally processing and magnifying images, zooming is possible from 10X (the optical zoom limit), to a maximum of 40X digital magnification.

200X*: Allows you to use the Digital Zoom. By digitally processing and magnifying images, zooming is possible from 10X (the optical zoom limit), to a maximum of 200X digital magnification.

*Not available when the Recording Mode Switch is set to “HD” or “MEMORY”.

Gain up

GAIN UP

(Factory-preset: AGC)

OFF: Allows you to shoot dark scenes with no picture brightness adjustment.

AGC: The overall appearance may be grainy, but the image is bright.

Navigation time

NAVIGATION(Factory-preset: MANUAL)

5SEC / 15SEC / 30SEC / 60SEC:

The captured image is stored in the memory card as a thumbnail image when the recording time is over the navigation time.

For example, “5SEC” is suitable to record short scenes with the thumbnail images. ( pg. 50) However, the stored thumbnail images may take up a lot of memory. In this case, using the memory card with large capacity is recommended.

MANUAL: Enables thumbnail images to be made manually. ( pg. 50)

Image 34

Contents JY-HD10 Dear Customer Important for owners in the U.KIt is recommended that you… Some DO’S and DON’TS on the Safe USE of Equipment Above ALLOn the main unit JY-HD10 On the AC adapter AA-V40EG, AA-V40EKBefore recording an important scene… DC Cord Remote Control UnitCleaning Cassette Memory Card 8 MBHow To Detach/Attach The Lens Hood How To Attach The Core FilterHow To Attach The Strap To detachHow To Use The Audio Cable How To Attach The Lens CapYou cannot attach the lens cap directly to the camcorder When using an interviewing microphone at the same time How To Attach The HandleHow To Use The Pro Pad MIC in switchContents Using The Battery Pack PowerCharging The Battery Pack 10 ENCause a fire or explosion Using AC PowerAbout Batteries For other notes, pgWhile using the viewfinder Grip AdjustmentWhile using the LCD monitor 12 ENViewfinder Adjustment pgPower-Linked Operation Operation Mode14 EN Date/Time Settings Built-in Clock’s Rechargeable Lithium BatteryLoading a Cassette Unloading a Cassette Approximate recording time Tape Recording mode16 EN To protect valuable recordings…Loading a Memory Card /Unloading a Memory Card 18 EN Basic RecordingFeatures Recording modes and featuresFeatures for Video Recording Mode Viewfinder on LCD monitor on DV mode HD/SD modeZooming 20 ENTape Remaining Time Journalistic ShootingTime Code Time code cannot be resetWhen a blank portion is recorded on a tape Recording From The Middle Of a TapeNormal Playback To control the speaker volume…22 EN Still PlaybackPlayback Zoom Shuttle SearchSlow-Motion Playback Blank Search24 EN To Connect a Conventional TV or VCRFor S-video or video connection If using a VCR, go to stepIf not, go to step For component video connection26 EN Basic Shooting D.S.C. SnapshotAuto Playback Of Images Normal Playback Of ImagesIndex Playback Of Files 28 ENViewing File Information To protect the currently displayed file Protecting FilesTo Remove Protection CardTo delete the currently displayed file Memory card 30 ENDeleting Files To delete all files stored in the memory card Folder and File names Resetting The File Name To cancel selection Press it. The Sub MenuInitialising a Memory Card To Reset The Number Of Prints32 EN To Print By Selecting Still Images And Number Of PrintsFor Video Playback Menus For Video and D.S.C. Recording MenusFor D.S.C. Playback Menus 34 EN Camera MenuManual Menu Self-TimerMaximum telephoto setting Optical Image Stabilisation36 EN System MenuDisplay Menu Picture quality 38 ENDSC Menu Image sizeVideo Menu 40 EN To end Self-Timer recording, select OFF in step Self-TimerSet SELF-TIMER to on . pg Press Snapshot42 EN Motor Drive ModePress the Exposure Wheel in. Or, set the Power Switch to a Exposure ControlBacklight Compensation Iris LockTo return to automatic iris Control To return to automatic iris adjustment Manual Iris AdjustmentManual Shutter Speed Adjustment 44 ENManual Focus To reset to Auto FocusManual Zooming 46 EN White Balance AdjustmentSelect Auto in . Or, set the Power Switch to a To return to automatic white balance…Manual White Balance Adjustment Program AE 48 ENWipe Or Fader Effects SportsDuring Record-Standby Special EffectsProgram AE can be changed during recording or To deactivate the selected effectNavigation Function To cancel Navigation search midway50 EN To make thumbnail images after video recording ManuallyMode, it will enter the playback pause mode Be corrupted if the battery becomes exhaustedIndicator appears briefly During deletion. If the memory card becomesTo use this camcorder as a recorder 52 ENTo use this camcorder as a player Date/timeEquipped With An i.LINK Dubbing To Or From a Video UnitDV to DV dubbing 54 ENMPEG2 to MPEG2 dubbing Card is not loaded, the message Copying If an image recorded on the tape using DVDubbing Still Images Recorded On Failed is displayedBeam Effective Area indoor use Installing The Batteries56 EN Buttons And FunctionsFrame-By-Frame Playback DV only Slow-Motion Playback DV onlyPlayback Zoom DV only Playback Special Effects DV only 58 ENAudio Dubbing DV only To hear the sound during Audio DubbingDuring Insert Editing, set the Recording Mode Switch to DV Insert Editing DV onlyRandom Assemble Editing R.A.Edit DV only VCR Code List VCR Brand Name60 EN Set Remote/VCR CodeMake Connections 62 EN Select ScenesAutomatic Editing To VCR Engage the Stop modes for the camcorder and the VCRFor More Accurate Editing Adjustment Of VCR/Camcorder Timing64 EN Diagnosing VCR/Camcorder TimingUsing USB cable Using USB cableUsing i.LINK cable Using i.LINK cableThis camcorder can be used as a WebCam via USB connection 66 ENWebCam You can also use the camcorder for videoItems 68 EN PowerSymptom Possible Causes Corrective Action Video and D.S.C. RecordingViewfinder indications blink Certain modes of Program HD or SD mode when a Disconnect either of twoLCD monitor or Certain Wipe/Fader effects AE, OIS and other AE and OIS. pg70 EN Advanced featuresPress Back Light Camcorder When the LCD monitor’s Other problemsIs discharged 72 EN Than 1 hour until condensation disappears Appears when no tape is loaded pgIndications Meaning Compatible with this camcorder74 EN Indication remains, consult your nearest JVC dealer Size that is not compatible with this camcorderProtected SD Memory Card loaded Your nearest JVC dealer76 EN General Battery PrecautionsBattery Packs CassettesMain Unit Memory CardsLCD Monitor Do NOT…About moisture condensation How To Handle a CD-ROM78 EN Serious malfunctioningCleaning The Camcorder After Use80 EN USB VTR82 EN Controls IndicatorsConnectors Other PartsDuring Video Recording Only 84 ENLCD Monitor/Viewfinder Indications During D.S.C. Recording OnlyDuring Video Playback 86 EN Program AE Program AE Wide Mode DV WidePlayback sound Recording TimeJY-HD10