JVC JY-HD10 manual How To Attach The Core Filter, How To Attach The Strap, To detach, To attach

Page 6

6 EN

How To Attach The Core Filter

Attach the core filters to the cables. The core filter reduces interference.

Types of core filters

	Size	Cable	Times to
	Size	Cable	wind
			wind

	Large	i.LINK cable*	Twice

	Medium	USB cable**	Once

	Small	DC cord	Once
	Small	Audio cable	Once
		Audio cable

*Optional

(If you have an optional JVC i.LINK cable VC-VDV206U or VC-VDV204U with core filters, it is not necessary to attach the provided core filter. If you are going to use any other i.LINK cable, attach the provided core filter.)

**Attach two core filters to both ends of the cable.

The procedure below is an example of winding cable once.

1Release the stoppers on both ends of the core filter.

Stopper

2Run the cable through the core filter, leaving approx. 3 cm of cable between the cable plug and the core filter. Wind the cable once around the outside of the core filter as shown in the illustration.

● Wind the cable so that it is not slack.

3 cm

Wind once.

3Close the core filter until it clicks shut.

NOTES:

●Take care not to damage the cable.

●When connecting a cable, attach the end with the core filter to the camcorder.

How To Attach The Strap

1Following the illustration, thread the strap through the eyelet a.

2Fold it back and thread it through the buckle b.

3Repeat the procedure to attach the other end of the strap to the other eyelet c.

4Confirm the strap is not twisted.

NOTE:

When the Pro pad is used ( pg. 8), attach the strap to the eyelet c and the eyelet on the Pro pad.

How To Detach/Attach The Lens Hood

The provided lens hood helps block out glare when shooting under bright sunlight, the same way professional photographers do.

Screw

Lens hood

To detach

1Loosen the screw on the lens hood.

2Turn the lens hood counterclockwise.

To attach

1While slanting the lens hood, align the lens hood with the camcorder’s lens, and then turn it clockwise.

2Tighten the screw on the lens hood.

NOTE:

Normally, use the camcorder with the lens hood attached. Remove the lens hood only when you use the optional wide or telephoto conversion lens.

Image 6

Contents JY-HD10 Important for owners in the U.K Dear CustomerIt is recommended that you… Some DO’S and DON’TS on the Safe USE of Equipment Above ALLOn the AC adapter AA-V40EG, AA-V40EK On the main unit JY-HD10Before recording an important scene… DC Cord Remote Control UnitCleaning Cassette Memory Card 8 MBHow To Detach/Attach The Lens Hood How To Attach The Core FilterHow To Attach The Strap To detachHow To Attach The Lens Cap How To Use The Audio CableYou cannot attach the lens cap directly to the camcorder When using an interviewing microphone at the same time How To Attach The HandleHow To Use The Pro Pad MIC in switchContents Using The Battery Pack PowerCharging The Battery Pack 10 ENCause a fire or explosion Using AC PowerAbout Batteries For other notes, pgWhile using the viewfinder Grip AdjustmentWhile using the LCD monitor 12 ENViewfinder Adjustment pgOperation Mode Power-Linked Operation14 EN Date/Time Settings Built-in Clock’s Rechargeable Lithium BatteryLoading a Cassette Unloading a Cassette Approximate recording time Tape Recording mode16 EN To protect valuable recordings…Loading a Memory Card /Unloading a Memory Card 18 EN Basic RecordingFeatures Recording modes and featuresFeatures for Video Recording Mode Viewfinder on LCD monitor on DV mode HD/SD modeZooming 20 ENTape Remaining Time Journalistic ShootingTime Code Time code cannot be resetWhen a blank portion is recorded on a tape Recording From The Middle Of a TapeNormal Playback To control the speaker volume…22 EN Still PlaybackPlayback Zoom Shuttle SearchSlow-Motion Playback Blank Search24 EN To Connect a Conventional TV or VCRFor S-video or video connection If using a VCR, go to stepIf not, go to step For component video connection26 EN Basic Shooting D.S.C. SnapshotAuto Playback Of Images Normal Playback Of Images28 EN Index Playback Of FilesViewing File Information To protect the currently displayed file Protecting FilesTo Remove Protection CardTo delete the currently displayed file Memory card 30 ENDeleting Files To delete all files stored in the memory cardFolder and File names Resetting The File NameTo cancel selection Press it. The Sub MenuInitialising a Memory Card To Reset The Number Of Prints32 EN To Print By Selecting Still Images And Number Of PrintsFor Video and D.S.C. Recording Menus For Video Playback MenusFor D.S.C. Playback Menus 34 EN Camera MenuManual Menu Self-TimerMaximum telephoto setting Optical Image Stabilisation36 EN System MenuDisplay Menu Picture quality 38 ENDSC Menu Image sizeVideo Menu 40 EN To end Self-Timer recording, select OFF in step Self-TimerSet SELF-TIMER to on . pg Press Snapshot42 EN Motor Drive ModePress the Exposure Wheel in. Or, set the Power Switch to a Exposure ControlIris Lock Backlight CompensationTo return to automatic iris Control To return to automatic iris adjustment Manual Iris AdjustmentManual Shutter Speed Adjustment 44 ENTo reset to Auto Focus Manual FocusManual Zooming 46 EN White Balance AdjustmentSelect Auto in . Or, set the Power Switch to a To return to automatic white balance…Manual White Balance Adjustment Program AE 48 ENWipe Or Fader Effects SportsDuring Record-Standby Special EffectsProgram AE can be changed during recording or To deactivate the selected effectNavigation Function To cancel Navigation search midway50 EN To make thumbnail images after video recording ManuallyMode, it will enter the playback pause mode Be corrupted if the battery becomes exhaustedIndicator appears briefly During deletion. If the memory card becomesTo use this camcorder as a recorder 52 ENTo use this camcorder as a player Date/timeEquipped With An i.LINK Dubbing To Or From a Video Unit54 EN DV to DV dubbingMPEG2 to MPEG2 dubbing Card is not loaded, the message Copying If an image recorded on the tape using DVDubbing Still Images Recorded On Failed is displayedBeam Effective Area indoor use Installing The Batteries56 EN Buttons And FunctionsSlow-Motion Playback DV only Frame-By-Frame Playback DV onlyPlayback Zoom DV only Playback Special Effects DV only 58 ENAudio Dubbing DV only To hear the sound during Audio DubbingDuring Insert Editing, set the Recording Mode Switch to DV Insert Editing DV onlyRandom Assemble Editing R.A.Edit DV only VCR Code List VCR Brand Name60 EN Set Remote/VCR CodeMake Connections 62 EN Select ScenesAutomatic Editing To VCR Engage the Stop modes for the camcorder and the VCRFor More Accurate Editing Adjustment Of VCR/Camcorder Timing64 EN Diagnosing VCR/Camcorder TimingUsing USB cable Using USB cableUsing i.LINK cable Using i.LINK cableThis camcorder can be used as a WebCam via USB connection 66 ENWebCam You can also use the camcorder for videoItems 68 EN PowerSymptom Possible Causes Corrective Action Video and D.S.C. RecordingViewfinder indications blink Certain modes of Program HD or SD mode when a Disconnect either of twoLCD monitor or Certain Wipe/Fader effects AE, OIS and other AE and OIS. pgAdvanced features 70 ENPress Back Light Other problems Camcorder When the LCD monitor’sIs discharged 72 EN Than 1 hour until condensation disappears Appears when no tape is loaded pgIndications Meaning Compatible with this camcorder74 EN Indication remains, consult your nearest JVC dealer Size that is not compatible with this camcorderProtected SD Memory Card loaded Your nearest JVC dealer76 EN General Battery PrecautionsBattery Packs CassettesMain Unit Memory CardsLCD Monitor Do NOT…About moisture condensation How To Handle a CD-ROM78 EN Serious malfunctioningCleaning The Camcorder After Use80 EN USB VTR82 EN Controls IndicatorsConnectors Other PartsDuring Video Recording Only 84 ENLCD Monitor/Viewfinder Indications During D.S.C. Recording OnlyDuring Video Playback 86 EN Program AE Program AE Wide Mode DV WidePlayback sound Recording TimeJY-HD10