Card Cover
Memory card |
Clipped edge |
Label |
EN11
Loading A Memory Card
The provided MultiMediaCard is already inserted in the camcorder when you receive the camcorder.
1 Make sure the camcorder’s power is off.
2 Open the card cover (MEMORY CARD).
3 Insert the memory card clipped edge first.
•Do not touch the terminal on the reverse side of the label.
4 To close the card cover, push it until you hear a click.
To Unload A Memory Card . . .
.... in step 3 push the memory card, which then comes
out of the camcorder automatically. Pull it out and close the card cover.
NOTES:
●Be sure to use only SD Memory Cards marked “
”
or MultiMediaCards marked “
”.
●Some brands of memory cards are not compatible with this camcorder. Before purchasing a memory card , consult its manufacturer or dealer.
●Before using a new memory card, it is necessary to FORMAT the card. pg. 47.
●Even if a memory card is inserted in the camcorder, the camcorder may not recognize it. In this case, remove the memory card once and insert it again.
ATTENTION:
Do not insert/remove the memory card while the camcorder is turned on, as this may cause the memory card to be corrupted or cause the camcorder to become unable to recognize whether or not the card is installed.