1 Make sure all units are turned off.
2 Connect the camcorder to a TV or VCR as shown in the illustration ( pg. 52).
If using a VCR . . . go to step 3. If not . . . go to step 4.
3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual.
4 Turn on the camcorder, the VCR and the TV.
5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.
To choose whether or not the following displays appear on the connected TV . . .
• Date/Time
.... set “DATE/TIME” to “AUTO”, “ON” or “OFF”
in the Menu Screen ( pg. 39).
• Time Code
.... set “TIME CODE” to “ON” or “OFF” in the
Menu Screen ( pg. 39).
• Playback Sound Mode, Tape Speed And Tape Running Displays for video playback
Or
Directory/File Names and Image Number/Total Number of Images for D.S.C. Playback
.... set “ON SCREEN” to “LCD” or “LCD/TV” in
the Menu Screen ( pg. 39).
Or, press DISPLAY on the remote control.
EN53
NOTES:
●It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery pack ( pg. 7).
●To monitor the picture and sound from the
camcorder without inserting a tape or memory card, set the camcorder’s Power Switch to “ 
” or “ 
”, then set your TV to the appropriate input mode.
●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.
●If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.
●If no image is displayed or no sound is heard from
the TV, set “S/AV INPUT” to “OFF” in the Menu Screen ( pg. 39).