JVC GR-DV2000 specifications To End Progressive Mode Recording

22 EN	RECORDING
	Power Switch Shooting
	Mode Switch
SNAPSHOT
Button

Lock Button

Recording Start/Stop Button

Advanced Features For Video And D.S.C.

Progressive Mode Recording

This mode lets you record moving images (successive jitter-free still images) onto a tape. Images can then played back jitter-free, with superior quality. High-resolution still images can also be processed on a personal computer or can be printed out (
pg. 55).

1 Set the Shooting Mode Switch to “VIDEO”, then set the Power Switch to “ ” while pressing down the Lock Button located on the switch. Pull out the viewfinder fully or open the LCD monitor fully.

2 Set “CAMERA MODE” to “PS-VIDEO” in the Menu Screen (
pg. 26, 27).

3 To start Progressive Mode Recording, press the Recording Start/Stop Button.

To End Progressive Mode Recording . . .

.... press the Recording Start/Stop Button. The camcorder

enters the Record-Standby mode.

NOTES:

●When an image recorded using the Progressive Mode is played back, the image may not look natural.

●When “CAMERA MODE” is set to “PS-VIDEO”, Picture Wipe/Dissolve (
pg. 32) and some Programme AE with special effects (
pg. 34) cannot be used.

●If SNAPSHOT is pressed in the PS-VIDEO mode, a snapshot will be recorded with higher quality than in

VIDEO mode. However, “MULTI-4” and “MULTI-9” cannot be used (
pg. 18).