16 EN | RECORDING Basic Recording For Video |
Power Switch | Shooting |
| Mode Switch |
Power lamp
Lock Button
Recording Start/Stop Button
Display
25min Tape remaining time indicator (Approximate)
min 
90 min 
89 min 
3 min
(Now
calculating)
0min
1 min
2 min
(Blinking) (Blinking) (Blinking)
Tally lamp (lights while recording is in progress)
BR I GHT
180° 90° 
NOTE:
You should already have performed the procedures listed below. If not, do so before continuing.
●Power ( pg. 6)
●Grip Adjustment ( pg. 8)
●Viewfinder Adjustment ( pg. 8)
●Load A Cassette ( pg. 10)
●Recording Mode Setting ( pg. 13)
1 Set the Shooting Mode Switch to “VIDEO”, then set the Power Switch to “
” or “ 
” while pressing down the Lock Button located on the switch. Make sure “CAMERA MODE” is set to “VIDEO” in the Menu Screen ( pg. 26, 27).
Shooting while using the viewfinder: Make sure the LCD monitor is closed and locked. Pull out the viewfinder fully.
•Be sure to pull out the viewfinder until you hear a click, otherwise it may be pushed back in during use.
Shooting while using the LCD monitor: Make sure the viewfinder is pushed back in. Press PUSH OPEN and open the LCD monitor fully. Tilt it upward/ downward for best viewability.
•The power lamp lights and the camcorder enters the
2 Press the Recording Start/Stop Button. “
” appears while recording is in progress.
To Stop Recording . . .
.... press the Recording Start/Stop Button. The camcorder
To Adjust The Brightness Of The Display
.... rotate the MENU wheel until the bright level indicator
on the display moves and the appropriate brightness is reached.
•It is also possible to adjust the brightness of the view- finder.
PUSH OPEN Button | MENU Wheel |