JVC GR-DV2000 specifications 56 EN, Dubbing To a VCR, To use this camcorder as a player

Following the illustration, connect the camcorder and the VCR. Also refer to pg. 52 and 53.

Set the camcorder’s Power Switch to “ ” while pressing down the Lock Button located on the switch, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.

Set “S/AV INPUT” to “OFF” in the Menu Screen (
pg. 39).

56 EN

Power Switch

To

AV

To

Connector S-VIDEO cover**

S-Video	Audio/Video cable
cable	[mini-plug to RCA plug]
(provided)	(provided)

To AUDIO, VIDEO* and

S-VIDEO IN connectors

VCR

TV

*Connect when an S-Video cable is not used.

**When connecting the cables, open this cover.

DUBBING

Dubbing To A VCR

[To use this camcorder as a player]

1

2

3

4 Engage the VCR’s AUX and Record-Pause modes.

5 Engage the camcorder’s Play mode to find a spot just before the edit-in point. Once it is reached, press 4/

6on the camcorder.

6 Press 4/6on the camcorder and engage the VCR’s Record mode.

7 Engage the VCR’s Record-Pause mode and press 4/6 on the camcorder.

8 Repeat steps 5 through 7 for additional editing, then stop the VCR and camcorder when finished.

NOTES:

●You can use Playback Zoom (
pg. 63) or Playback Special Effects (
pg. 64) in step 6.

●Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape.

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time

.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the

Menu Screen (
pg. 39).

•Time Code

.... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen (
pg. 39).

•Playback Sound Mode, Tape Speed And Tape Running Displays

.... set “ON SCREEN” to “LCD” or “LCD/TV” in the Menu Screen (
pg. 39). Or, press DISPLAY on the remote control.