JVC GR-DV1800 specifications Recording Mode Setting, EN13

Page 13

Power Switch

Power Lamp

Lock Button

MENU Wheel

Display

							Menu Screen
		REC MODE		–	SP
					LP
								Sub Menu
								Sub Menu

EN13

Recording Mode Setting

Set the tape recording mode depending on your preference.

1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch, and open the LCD monitor fully or pull out the viewfinder fully. The power lamp lights and the camcorder is turned on.

2 Press the MENU wheel. The Menu Screen appears.

3 Rotate the MENU wheel to select “ CAMERA” and press it. The CAMERA Menu appears.

4 Rotate the MENU wheel to select “REC MODE” and press it. The Sub Menu appears. Select “SP” or “LP” by rotating the MENU wheel and press it. Rotate the MENU wheel to select “1RETURN”, and press it twice. The Menu Screen closes.

•Audio Dubbing ( pg. 71) and Insert Editing

( pg. 72) are impossible on a tape recorded in the LP mode.

•“LP” (Long Play) is more economical, providing 1.5 times the recording time.

NOTES:

●If the recording mode is switched during recording, the playback picture will be blurred at the switching point.

●It is recommended that tapes recorded in the LP mode on this camcorder be played back on this camcorder.

●During playback of a tape recorded on another camcorder, blocks of noise may appear or there may be momentary pauses in the sound.

Image 13

Contents GR-DV2000 GR-DV1800 It is recommended that you Dear CustomerSome DO’S and DON’TS on the Safe USE of Equipment Align the lens How To Attach The Lens HoodHood with Camcorder’s lens Screw it Clockwise Release the stoppers on both ends of the Core Filter How To Attach Core FilterCharging the Battery Pack PowerAbout Batteries Using AC Power Using the Battery PackTo Detach The Battery Pack Approximate recording timeViewfinder Adjustment Grip AdjustmentShoulder Strap Attachment Tripod MountingBuilt-in Clock’s Rechargeable Lithium Battery Date/Time SettingsLoading/Unloading a Cassette 10 ENEN11 Loading a Memory CardTo Unload a Memory Card Power Switch Position Manual Operation ModeShooting Mode Switch Position 12 ENEN13 Recording Mode Setting14 EN Picture Mode SettingGo to step Storage Capacity EN15Approximate number of storable images 16 EN To Adjust The Brightness Of The DisplayTo Stop Recording Journalistic Shooting EN17Interface Shooting To turn the tally lamp or beep sounds off, pgSnapshot For Video Recording Snapshot Mode SelectionBasic Shooting Snapshot 20 EN Slide the Power Zoom Lever towards TZoom Zoom OutEN21 When a blank portion is recorded on a tapeProper recording To End Progressive Mode Recording Progressive Mode RecordingEN23 Description of Progressive Scan CCDRegular shooting of moving images Dual Shooting EN Recording Advanced Features For Video And D.S.C.Feature Manual Focus Feature Auto FocusEN25 To obtain correct focusIf you have selected FADER/WIPE Program AE or W. Balance Using Menus For Detailed AdjustmentSee pg SYSTEM, Display or DSCMenu Screen Explanations EN27Video pg and Camera Mode is set to Video or PS Refer to Self-Timer pgVideo pg and Camera Mode is set to PS-VIDEO Refer to 5-Second Recording pgEN29 Self-Timer EN31 Second RecordingInstead of pressing the Recording Start/Stop Button FADE/WIPE Selection Fade/Wipe EffectsPicture Wipe or Dissolve Selection Fader And Wipe Menu EN33Menu Effect Press PROG.AE again so that the effect indicator Disappears To Deactivate The Selected ModeProgramme AE With Special Effects Sports Variable Shutter Speed 1/250 1/4000*1 EN35STROBE*2 Slow Slow Shutter*2Iris Lock Exposure ControlManual White Balance Operation White Balance AdjustmentEN37 To Return To Automatic White BalanceAvailable only with the remote control pg To Control The Speaker Volume38 EN Playback Advanced Features For Video Playback Sound 40 ENDisplay Blank Search To cancel Blank Search midwayEN41 Press Blank SearchNormal Playback 42 ENAuto Playback Press Memory PlayIndex Playback Index ScreenEN43 Protecting Images 44 ENTo Protect AN Image To Remove ProtectionEN45 Deleting ImagesTo Delete the Displayed Image To Delete ALL ImagesSuperimposing a Print Frame 46 ENTo Make The Print Frame Disappear Press Print FrameEN47 Initialising a Memory CardYou can initialise a memory card anytime Print Frame Deletion 48 ENTo Delete ALL Print Frames EN49Perform steps 1 through 5 on pag To Reset The Setting Setting Print Information Dpof SettingEN51 To Reset The No. Of PrintsTo Print by Selecting Still Images and NO. of Prints Perform steps 1 through 5 on pg52 EN If your TV/VCR has a 21-pin connectorUse the provided Cable Adapter CamcorderEN53 USB Mode Accessing File appears on Turn the camcorder’s Power Switch to While54 EN Connection To a Personal ComputerEN55 Connection To a Video Unit Equipped With a DV ConnectorMake sure all units are turned off Dubbing To a VCR 56 ENTo use this camcorder as a player For GR-DV2000 owners onlyEN57 Dubbing From a VCRTo use this camcorder as a recorder GR-DV2000 only VCR Playback deckDubbing 58 ENEN59 Dubbing Images Recorded On a Tape To a Memory Card 60 ENEN61 Installing The BatteriesFunctions 62 ENButtons Feature Frame-By-Frame Playback Feature Slow-Motion PlaybackFeature Playback Zoom EN6364 EN Feature Playback Special EffectsSET REMOTE/VCR Code EN65VCR Recording deck 66 EN JVC VCR equipped with a remote pause connectorMake Connections VCR other than aboveSelect Scenes EN67Automatic Editing to VCR 68 ENEN69 For More Accurate EditingDiagnosing VCR/CAMCORDER Timing Recording deck70 EN Adjustment of VCR/CAMCORDER TimingAudio Dubbing Set 12BIT Mode to Sound 2 or MIX Menu Screen pgEN71 To hear the dubbed sound during playbackInsert Editing 72 ENCorrective Action Clean the lens and checkReplace with new cassette 74 EN EN75 Mode of Programme AERecording. The effects are Rapid panningDo not try to use the Classic 76 ENRemove protection from EN77 Camcorder When the LCD monitor’sDisplayed colours differ From those that are actually BlinkPress Memory Play to 78 ENLCD monitor LCD monitor’s Adjust the brightness Subject to extremely high 10C to 35C pg Low temperaturesEN79 Recommended to charge it Charger does not light80 EN Cleaning The CamcorderAfter Use Connect the editing cable when performing DC Input Connector DC pgMulti Connector EN8182 EN RtyEEN83 These indications also appear during Dual mode Displays the Uxga mode Double orRotates while the tape is running VGA in order of qualityEN85 LCD Monitor/Viewfinder Indications During Video Playback Displays the sound modeLCD Monitor/Viewfinder Indications During D.S.C. Playback Displays the brightness of the LCD monitor or ViewfinderIndications Function EN87Possible Switch is set toSnapshot is pressed Appears, the memory card is corruptedTo avoid hazards EN89During use Store cassettes90 EN About moisture condensation EN91Serious malfunctioning 92 EN Time Code pg , 29, 39 EN93For General 94 ENFor Digital Video Camera For Digital Still CameraEN95 For ConnectorsGR-DV1800