JVC GR-DV1800 Dubbing From a VCR, EN57, To use this camcorder as a recorder GR-DV2000 only

Page 57

Power Switch

To

AV

To

Connector S-VIDEO cover**

Audio/Video cable [mini-plug to RCA plug] (provided)

S-Video cable (provided)

To Audio, Video* and

S-Video connectors

Cable Adapter (not provided)

If your VCR has a SCART connector, use a commercially available output cable adapter.

VCR (Playback deck)

TV

*Connect when an S-Video cable is not used.

**When connecting the cables, open this cover.

EN57

Dubbing From A VCR

[To use this camcorder as a recorder: GR-DV2000 only]

1 Make sure all units are turned off, then connect the camcorder and the VCR as shown in the illustration. Also refer to pg. 52 and 53.

2 Set “SOUND MODE” to “12 BIT” or “16 BIT” and “REC MODE” to “SP” or “LP” in the Menu Screen depending on your preference ( pg. 39).

3 Set the camcorder’s Power Switch to “ ” while pressing down the Lock Button located on the switch. Turn on the VCR’s power and insert the appropriate cassettes in the camcorder and the VCR.

4 Set “S/AV INPUT” to “ON” in the Menu Screen to engage the analogue input mode ( pg. 39).

5 Press the Recording Start/Stop Button on the camcorder to engage the Record-Pause mode.

“AV. IN ” appears on the screen.

6 Engage the VCR’s Play mode, then engage the Still Playback mode when you have found a spot just before the edit-in point.

7 Press the Recording Start/Stop Button on the

camcorder to engage the Record mode. rotates on the screen. Engage the VCR’s Play mode.

8 To stop dubbing, press the Recording Star/Stop Button

on the camcorder so that stops rotating, then engage the VCR’s Stop mode.

9 Repeat steps 6 through 8 for additional editing.

10 Set “S/AV INPUT” back to “OFF” in the Menu Screen to disengage the analogue input mode ( pg. 39).

NOTES:

●To use an output cable adapter (commercially avail- able), refer to its instructions.

●It is recommended to use the AC Power Adapter/

Charger as the power supply instead of the battery pack ( pg. 7).

●Analogue signals can be converted to digital signals with this procedure.

●It is also possible to dub from another camcorder.

Image 57

Contents GR-DV2000 GR-DV1800 It is recommended that you Dear CustomerSome DO’S and DON’TS on the Safe USE of Equipment How To Attach The Lens Hood Align the lensHood with Camcorder’s lens Screw it Clockwise Release the stoppers on both ends of the Core Filter How To Attach Core FilterPower Charging the Battery PackAbout Batteries Using AC Power Using the Battery PackTo Detach The Battery Pack Approximate recording timeViewfinder Adjustment Grip AdjustmentShoulder Strap Attachment Tripod MountingBuilt-in Clock’s Rechargeable Lithium Battery Date/Time SettingsLoading/Unloading a Cassette 10 ENLoading a Memory Card EN11To Unload a Memory Card Power Switch Position Manual Operation ModeShooting Mode Switch Position 12 ENEN13 Recording Mode SettingPicture Mode Setting 14 ENGo to step EN15 Storage CapacityApproximate number of storable images To Adjust The Brightness Of The Display 16 ENTo Stop Recording Journalistic Shooting EN17Interface Shooting To turn the tally lamp or beep sounds off, pgSnapshot For Video Recording Snapshot Mode SelectionBasic Shooting Snapshot 20 EN Slide the Power Zoom Lever towards TZoom Zoom OutWhen a blank portion is recorded on a tape EN21Proper recording To End Progressive Mode Recording Progressive Mode RecordingDescription of Progressive Scan CCD EN23Regular shooting of moving images Dual Shooting EN Recording Advanced Features For Video And D.S.C.Feature Manual Focus Feature Auto FocusEN25 To obtain correct focusIf you have selected FADER/WIPE Program AE or W. Balance Using Menus For Detailed AdjustmentSee pg SYSTEM, Display or DSCMenu Screen Explanations EN27Video pg and Camera Mode is set to Video or PS Refer to Self-Timer pgVideo pg and Camera Mode is set to PS-VIDEO Refer to 5-Second Recording pgEN29 Self-Timer Second Recording EN31Instead of pressing the Recording Start/Stop Button Fade/Wipe Effects FADE/WIPE SelectionPicture Wipe or Dissolve Selection EN33 Fader And Wipe MenuMenu Effect To Deactivate The Selected Mode Press PROG.AE again so that the effect indicator DisappearsProgramme AE With Special Effects Sports Variable Shutter Speed 1/250 1/4000*1 EN35STROBE*2 Slow Slow Shutter*2Iris Lock Exposure ControlManual White Balance Operation White Balance AdjustmentEN37 To Return To Automatic White BalanceTo Control The Speaker Volume Available only with the remote control pg38 EN Playback Advanced Features For Video 40 EN Playback SoundDisplay Blank Search To cancel Blank Search midwayEN41 Press Blank SearchNormal Playback 42 ENAuto Playback Press Memory PlayIndex Screen Index PlaybackEN43 Protecting Images 44 ENTo Protect AN Image To Remove ProtectionEN45 Deleting ImagesTo Delete the Displayed Image To Delete ALL ImagesSuperimposing a Print Frame 46 ENTo Make The Print Frame Disappear Press Print FrameInitialising a Memory Card EN47You can initialise a memory card anytime Print Frame Deletion 48 ENEN49 To Delete ALL Print FramesPerform steps 1 through 5 on pag To Reset The Setting Setting Print Information Dpof SettingEN51 To Reset The No. Of PrintsTo Print by Selecting Still Images and NO. of Prints Perform steps 1 through 5 on pg52 EN If your TV/VCR has a 21-pin connectorUse the provided Cable Adapter CamcorderEN53 USB Mode Accessing File appears on Turn the camcorder’s Power Switch to While 54 EN Connection To a Personal ComputerConnection To a Video Unit Equipped With a DV Connector EN55Make sure all units are turned off Dubbing To a VCR 56 ENTo use this camcorder as a player For GR-DV2000 owners onlyEN57 Dubbing From a VCRTo use this camcorder as a recorder GR-DV2000 only VCR Playback deckDubbing 58 ENEN59 Dubbing Images Recorded On a Tape To a Memory Card 60 ENEN61 Installing The Batteries62 EN FunctionsButtons Feature Frame-By-Frame Playback Feature Slow-Motion PlaybackFeature Playback Zoom EN6364 EN Feature Playback Special EffectsEN65 SET REMOTE/VCR CodeVCR Recording deck 66 EN JVC VCR equipped with a remote pause connectorMake Connections VCR other than aboveSelect Scenes EN67Automatic Editing to VCR 68 ENEN69 For More Accurate EditingDiagnosing VCR/CAMCORDER Timing Recording deck70 EN Adjustment of VCR/CAMCORDER TimingAudio Dubbing Set 12BIT Mode to Sound 2 or MIX Menu Screen pgEN71 To hear the dubbed sound during playbackInsert Editing 72 ENClean the lens and check Corrective ActionReplace with new cassette 74 EN EN75 Mode of Programme AERecording. The effects are Rapid panning76 EN Do not try to use the ClassicRemove protection from EN77 Camcorder When the LCD monitor’sDisplayed colours differ From those that are actually BlinkPress Memory Play to 78 ENLCD monitor LCD monitor’s Adjust the brightness Subject to extremely high 10C to 35C pg Low temperaturesEN79 Recommended to charge it Charger does not lightCleaning The Camcorder 80 ENAfter Use Connect the editing cable when performing DC Input Connector DC pgMulti Connector EN8182 EN RtyEEN83 These indications also appear during Dual mode Displays the Uxga mode Double orRotates while the tape is running VGA in order of qualityEN85 LCD Monitor/Viewfinder Indications During Video Playback Displays the sound modeLCD Monitor/Viewfinder Indications During D.S.C. Playback Displays the brightness of the LCD monitor or ViewfinderIndications Function EN87Possible Switch is set toSnapshot is pressed Appears, the memory card is corruptedTo avoid hazards EN89During use Store cassettes90 EN EN91 About moisture condensationSerious malfunctioning 92 EN Time Code pg , 29, 39 EN93For General 94 ENFor Digital Video Camera For Digital Still CameraEN95 For ConnectorsGR-DV1800