JVC GR-DV1800 specifications EN77, Displayed colours differ From those that are actually, Blink

		EN77
SYMPTOM	POSSIBLE CAUSES	CORRECTIVE ACTION
30. Images on the LCD	30. • In places subject to low	30. • Adjust the brightness and
monitor appear dark or	temperature, images become	angle of the LCD monitor
whitish.	dark due to the	( pg. 16, 17).
	characteristics of the LCD
	monitor. When this happens,
	the displayed colours differ
	from those that are actually
	recorded. This is not a defect
	of the camcorder.
	• When the LCD monitor’s
	fluorescent light reaches the
	end of its service life, images
	on the LCD monitor become
	dark. Consult your nearest
	JVC dealer.
31. The rear of the LCD	31. • The light used to illuminate	31. • Close the LCD monitor to
monitor is hot.	the LCD monitor causes it to	turn it off or set the Power
	become hot.	Switch to “OFF”, and let the
		unit cool down.
32. The indicators and the	32. • This may occur when the	32.
image colour on the LCD	surface or the edge of the	————
monitor are not clear.	LCD monitor is pressed.
33. The LCD monitor or	33. • Certain Fade/Wipe effects,	33. • Re-read the sections
viewfinder indications	certain modes of Programme	covering Fade/Wipe effects,
blink.	AE with special effects, “DIS”	Programme AE with special
	and other functions that	effects and “DIS”
	cannot be used together are	( pg. 28, 32 – 35).
	selected at the same time.
34. Coloured bright spots	34. • The LCD monitor and the	34.
appear all over the LCD	viewfinder are made with
monitor or the viewfinder.	high-precision technology.
	However, black spots or
	bright spots of light (red,
	green or blue) may appear
	constantly on the LCD	————
	monitor or the viewfinder.
	These spots are not recorded
	on the tape. This is not due
	to any defect of the unit.
	(Effective dots: more than
	99.99 %)

CONTINUED ON NEXT PAGE