66 EN | USING THE REMOTE CONTROL UNIT (cont.) |
Connector cover**
To
EDIT
Editing cable (provided)
“Y/C”/“CVBS” video out select switch
To Remote
PAUSE or
R.A.EDIT
To
AV
To
S-VIDEO
Audio/Video cable (provided)
To AUDIO,
VIDEO* and
connectors
If your VCR has the SCART connector, use the provided cable adapter.
VCR
MAKE CONNECTIONS
Also refer to pg. 52 and 53.
1
A JVC VCR equipped with a remote pause connector . . .
... connect the editing cable to the Remote PAUSE connector.
A JVC VCR not equipped with a remote pause connector but equipped with an R.A.EDIT connector . . .
... connect the editing cable to the R.A.EDIT connector.
A VCR other than above . . .
... connect the editing cable to the remote control’s PAUSE IN connector.
2 Insert a recorded tape into the camcorder and set the
Power Switch to “ 
” while pressing down the Lock Button located on the switch.
3 Turn the VCR power on, insert a recordable tape and engage the AUX mode (refer to the VCR’s instructions).
NOTES:
●Before Random Assemble Editing, make sure the indications do not appear on the TV monitor. If they do, they will be recorded onto the new tape.
To choose whether or not the following displays appear on the connected TV . . .
•Date/Time
.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the
Menu Screen ( pg. 39).
•Time Code
.... set “TIME CODE” to “ON” or “OFF” in the Menu
To PAUSE IN
TV
DISPLAY
*Connect when an
**When connecting cables, open this cover.
Screen ( pg. 39).
•Playback Sound Mode, Tape Speed And Tape Running Displays
.... set “ON SCREEN” to “LCD” or “LCD/TV” in the Menu Screen ( pg. 39). Or, press DISPLAY on the remote control.
●For
●Set the video out select switch of the cable adapter as required:
Y/C : When connecting to a TV or VCR which accepts Y/C signals and uses an
CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.
●When editing on a VCR equipped with a DV input connector, an optional DV cable can be connected instead of an