| Remote sensor |
Zoom Buttons | Up Button |
SHIFT | Down Button |
Left or SLOW |
|
Rewind Button | PLAY |
| |
| PAUSE |
Right or SLOW STOP Forward Button
Normal playback | Press T |
To move image,
press (Right) while keeping SHIFT held down.
EN63
FEATURE: Slow-Motion Playback
PURPOSE:
To allow
OPERATION:
1)To change from normal to
playback resumes.
To stop
NOTES:
●You can also engage
●During
●After SLOW (9or 0) is pressed and held, the still image may be displayed for a few seconds, followed by a blue screen for a few seconds. This is not a malfunction.
●There may be a small margin between the
●During
●During
FEATURE: Frame-By-Frame Playback
PURPOSE:
To allow
OPERATION:
1)To change from normal to
NOTE:
You can also engage
FEATURE: Playback Zoom
PURPOSE:
To magnify the recorded image up to 10X at any time during playback.
OPERATION:
1)Press PLAY (4) to find the scene of interest.
2)Press the Zoom Buttons (T/W) on the remote control. Make sure the remote control is pointed at the camcorder's remote sensor. Pressing T zooms in.
3)You can move the image on screen around to find a particular portion of the picture. While holding down
SHIFT, press (Left), (Right), (Up) and (Down).
To end zoom, press and hold W until magnification returns to normal. Or, press STOP (5) and then press PLAY (4).
NOTES:
●Zoom can also be used during
●Due to digital image processing, the quality of the image may suffer.
●Playback Zoom cannot be used on images that were recorded when “CAMERA MODE” is set to