JVC GY-HD201E/CHE, GY-HD200E/CHE, GY-HD200U/CHU manual Left Side Section

Page 11

CONTROLS, INDICATORS AND CONNECTORS

Left Side Section

Set the [AUDIO INPUT] switch 3 according to the device to be connected.

Set the CH-2 audio input connector using the [CH-2 INPUT] switch 2.

The CH-2 audio from the set connector is recorded.

5Shoulder pad slide button

Button to adjust the position of the shoulder pad.

a

VIDEO

CH1

9 8 7

IEEE 1394 CH2-AUDIO OUT-CH1 VIDEO

1

2

3

When you press this button, you can move the position of the shoulder pad 6 forward or backward.

6Shoulder pad

7Cassette cover

Sliding the EJECT switch a on page 18 located on the top section opens this cover to allow insertion or removal of the videocassette.

CAUTION

To prevent foreign objects from entering the internal parts of the VTR unit, do not leave this device with the cover open

c

d

CH2-AUDIO OUT-

b

IEEE 1394

 

0 6 5

4

for extended periods of time.

a[IEEE1394] IEEE1394 switch

1Viewfinder connector (6-pin)

Connect the cable from the viewfinder here.

2[CH-2 INPUT] CH-2 audio input connector selector switch

Selects the CH-2 audio input connector.

INPUT1 : Inputs the audio from the INPUT1 connector

4into CH-2.

INPUT2 : Inputs the audio from the INPUT2 connector

4into CH-2.

MEMO

The audio from the INPUT1 connector is also input into CH-1 regardless of the setting.

3[AUDIO INPUT] Audio input signal selector switch This switch is used to select the input sound signal from INPUT1 or INPUT2 connector.

LINE

: Set to this position when connected to audio

 

equipment, etc. The reference input level is

 

+4 dBs.

MIC

: Set to this position when the dynamic micro-

 

phone is connected.

MIC+48V : Set to this position when a microphone requiring +48 V power supply (phantom microphone, etc.) is connected.

CAUTION

When connecting a component that does not require +48 V power supply, make sure that the switch is not set to MIC+48V before the component is connected.

MEMO

You can select the normal input level for MIC and MIC+48V in the INPUT1, 2 MIC REF. item on the AUDIO/MIC[1/2] menu screen.

X See page 84.

4[INPUT1/INPUT2] INPUT1/INPUT2 audio input connec- tors

These are audio input connectors for connecting to an external audio device or microphone.

8[VIDEO OUT] Video output terminal (RCA)

This is a terminal for composite video signal output.

Select whether or not to output a signal with setup in SET UP on the VIDEO FORMAT[2/2] menu screen. (Only for U model)

Set ANALOG OUT CHAR. item on the OTHERS[1/2] menu screen to ON to output menu setting screens and warnings from this terminal.

9[AUDIO OUTPUT CH-1/CH-2] Audio output connector (RCA)

Output connector for audio signals.

Outputs the input audio signal in the Camera mode.

Outputs the playback audio signal in the VTR mode.

When a HDV/DV signal (IEEE1394) is input, the EE sound of the input audio signal is output in the VTR mode. (HDV/DV signal input is possible with the GYHD200U/GY-HD201E.)

MEMO

Alarm sound is not output.

0[IEEE1394] IEEE1394 connector (6-pin)

Using an IEEE1394 cable (optional), a digital video com- ponent with IEEE1394 connector can be connected here. X See “Connecting the IEEE1394 Cable” on page 63.

X See “HDV/DV Dubbing” on page 65.

CAUTION

When connecting the IEEE1394 cable, confirm that the connector is facing the right direction before inserting.

X See page 63.

MEMO

Put the covers on the connectors when you are not using them.

Set according to the image format of the input/output sig- nal and playback signal of the IEEE1394 terminal.

HDV

: Set to this for HDV format.

DV

: Set to this for DV format.

b[Y/PB/PR] Component Y/PB/PR signal output terminal (BNC × 3)

Outputs analog component (Y/PB/PR) signals.

Select whether or not to add setup signals to DV format signals in SET UP item on the VIDEO FORMAT[2/2] menu screen. (Only for U model)

Set ANALOG OUT CHAR. item on the OTHERS[1/2] menu screen to ON to output menu setting screens and warnings from this terminal.

c[REMOTE] REMOTE terminal (Round 6-pin)

Some functions of this camera can be controlled exter- nally.

Connect to a remote control unit (RM-LP55/RM-LP57). X See “Connect a Remote Control Unit (RM-LP55/RM- LP57)” on page 68.

d[DC INPUT] DC input terminal (XLR 4-pin)

This is the 12V DC power input terminal. Connect to the AC adapter.

When a battery is installed and a cable is connected to this terminal, power supply from the battery stops and power is supplied by this terminal.

16

17

Image 11
Contents For Customer Use GY-HD200U/CHU Instructions GY-HD200E/CHE GY-HD201E/CHERemarque Important SafeguardsSafety Precautions European Union Safety Precautions Cont’dThis symbol is only valid in the European Union Information for Users on Disposal of Old EquipmentSD memory card See For DC ×2/EarphoneSee See pages 12, 36Contents Head Cleaning Precautions for Proper UseRoutine and Periodical Maintenance Precautions for Use of Head Cleaning TapeVideocassette to be Used Battery Pack to be UsedCharacteristic CCD Phe- nomena CondensationMemo Zoom LensFront Section Th16 × 5.5BRMULCD Door Rear SectionRight Side Section Left Side Section Top Section Recording and Image Out- put Formats Status Screens Status Screens in the Camera ModeSetting Status Contents of Indications Indications on the LCD Monitor and in the View- finderIndications on the LCD Monitor and in the Viewfinder Cont’d ContentsIndication Indication Contents NDF Magnified Status Indications on LCD MonitorSafety Zone Indication Camera mode only Alarm Message DisplaySwitching between the LCD Screen and Viewfinder Display Menu Setting ScreenAttaching the Microphone Provided How to Attach the View- finderBasic System Attaching the Zoom Lens Inserting an SD Memory Card Attaching the Tripod Base OptionalAC Operation Battery OperationTurning the Power on Date and Time Setting and DisplayingLoading/Unloading the Cassette Displaying the Time and Date on the Screen SettingDisplaying Time Code Presetting user’s bit data Presetting and Recording of Time CodeSetting Presetting time code dataPlaying Back Time Code Presetting User’s BitAborting Preset Operation About Time Code ModeViewfinder Adjustment Screen AdjustmentFull Auto White Balance FAW Back Focus AdjustmentWhite Balance Adjustment White Balance AdjustmentSetting the REC Item White Shading AdjustmentSetting the Video Format Setting the Frame Rate ItemScreen Size 43/169 Mode Selection Camera SettingsAudio Input Signal Selec- tion About the Focus Assist Function Audio Input Signal Selection Cont’dBasic Recording Opera- tion Monitoring Audio during RecordingHeader REC Function If the Record-Standby Mode Contin- uesRecord-Standby or Stop mode Function/Initial SettingExecuting the Header REC Function Playback ProcedureSearch Header REC FunctionDisplaying Alarms Connecting the VideoSignal Cables Connecting the IEEE1394 CableHDV/DV Dubbing Dubbing with AV DevicesOFF Backup RecordingSettings HDV/DV Dubbing Cont’dConnection Remote Control Unit Functions ListShutter Speed in 24p Mode Connect a Remote Con- trol Unit RM-LP55/RM- LP57Menu Screen Configura- tion TOP Menu Screen Setting Menu ScreensFrame Rate Function/Setting bold characters indicate initial settingsSetting Description Video FORMAT1/2 Menu ScreenAuto Initial settings U model 7.5% E model 0.0%Video FORMAT2/2 Menu Screen Menu Screen108% MiddleHigh NormalStop StandardWhite Balance Menu Screen Switch Mode Menu ScreenSwitch Mode menu screen is only displayed in camera mode REC Item Setting for Step Setting for VariableMIX AUDIO/MIC1/2 Menu ScreenAUDIO/MIC2/2 Menu Screen 70-80% LCD/VF2/4 menu screen can only be set in camera modeLCD/VF1/4 Menu Screen LCD/VF2/4 Menu ScreenLCD/VF4/4 Menu Screen Screen is displayed in the VTR modeLCD/VF3/4 Menu Screen Drop DisableTC/UB/CLOCK Menu Screen Header REC Menu ScreenOTHERS1/2 Menu Screen TIME/DATE Menu Screen1394 OTHERS2/2 Menu ScreenFile Manage Menu Screen Loading a menu settings fileSaving settings Error displaysRotate How to Use Skin DetailInitializing formatting an SD mem- ory card Outputting Color Bars How to Use Skin Detail Cont’dUsing the Skin Detail Function Display Status Action Blinking Pattern Remaining Battery/Tape Error Code Error Details This device Operation RemedySymptoms Remedy TroubleshootingHow to Display the Hour Meter HDV SpecificationsExternal Dimensions unit mm GY-HD251 Remarque Important SafeguardsSafety Precautions Port Cable Length See Provided only for U model HD251CHEContents Precautions for Use of Head Cleaning Tape Precautions for Proper UseRoutine and Periodical Maintenance Videocassette to be Used Battery Pack to be UsedCharacteristic CCD Phe- nomena CondensationGND Zoom LensFront Section Iris A/R InputRear Section 4TC GENE. Time code generator setting switchSetting, the time code always operates According to the input level. When excessiveEREC REC trigger button start/stop recording BGAIN Sensitivity selector switchPreset Right Side SectionRCA Left Side SectionTop Section Recording Composite Recording and Image Out- put FormatsIeee Indications on the LCD Monitor and in the View- finder Viewfinder Cont’d Indications on the LCD MonitorFull Auto ON, OFF Gain Filter OFF ND1ND2 FileNDF EXTDV-24PA Safety ZoneSafety Zone OFF Center Mark OFFAttaching the Microphone Provided How to Attach the ViewBasic System Attaching the Zoom Lens FinderSDHC-compliant memory cards cannot be used with this device Inserting an SD Memory Card„GY-HD251E Battery OperationAC Operation „GY-HD250UTurning the Power on VTR Setting and DisplayingLoading/Unloading the Cassette Date and TimeTime codes are displayed Time code input entered the IEEE1394 connectorDisplaying Time Code Displayed Time Code/User’s BitTime code generator’s running method is Presetting and Recording of Time CodeContinual time codes across different scenes Time code starts to run from the time it isFree REC Regen Internal Presetting the Time Code from the LCD ScreenPlaying Back Time Code InternalTC OUT Blinks when the time code cannot be synchronizedSlave unit GY-HD250U/GY-HD251E/GY-HD110U/GY- HD111E ExternalAdjusted Adjust the position and angle of the viewfinder Screen Adjustment Viewfinder AdjustmentBack Focus Adjustment When correct white balance is obtained, the approximate White Balance AdjustmentWhite Shading Adjustment Set the ND filter switch according to the current lightingND Filter Setting the Video FormatCamera Settings Screen Size 43/169 Mode SelectionAudio Input Signal Selec- tion Basic Recording Opera- tion Header REC Function How to set the Header REC menu screenSearch Playback ProcedureOutputting Audio Fast-Forward, RewindStatus Screen Display on the LCD Screen or Viewfinder Connecting the VideoSignal Cables Recording Composite Video Signals from an External DeviceDubbing with AV Devices Using Genlock Func- tionsSynchronized Signals Adjust SC and H PhaseHDV/DV Dubbing Connect a Remote Con- trol Unit RM-LP55/RM- LP57 Backup RecordingConnect a Remote Control Unit RM-LP55/RM-LP57 Cont’d Menu Screen Configura- tionMenu Screen Configuration Cont’d Setting Menu ScreensExecute TOP Menu ScreenVideo FORMAT1/2 Menu Screen OFFVideo FORMAT1/2 Menu Screen Cont’d Video FORMAT2/2 Menu ScreenHigh Menu Screen3200K MiddleStandard Normal108% Stop PresetWhite Balance Menu Screen None Switch Mode Menu ScreenAUDIO/MIC1/2 Menu Screen StepBlue AUDIO/MIC2/2 Menu ScreenLCD/VF1/4 Menu Screen MIXSEC LCD/VF2/4 Menu ScreenLCD/VF3/4 Menu Screen VoltageInternal LCD/VF4/4 Menu ScreenTC/UB/CLOCK Menu Screen ColorTIME/DATE Menu Screen Header REC Menu ScreenBlink OTHERS1/2 Menu ScreenOTHERS2/2 Menu Screen 3MINOTHERS2/2 Menu Screen Cont’d Genlock Menu ScreenFile Manage Menu Screen 100 101Skin color detection function, follow the steps below How to Use Skin DetailIf you want to change the range of colors recognized with Outputting Color Bars 104 105Switch to VTR No DV SignalNo HDV Signal SwitchError Code Error Details GY-HD250/GY-HD251 Remedy Operation RGB? TroubleshootingHow to Display the Hour Meter HD/SD SDI output SpecificationsAUX input Genlock inputCorrection