JVC GY-HD200E/CHE Displaying Time Code, Displayed Time Code/User’s Bit, Time codes are displayed

Page 81

PREPARATIONS FOR OPERATION

Setting and Displaying the Date and Time (Cont’d)

Setting the Date and Time

1.Display the CLOCK ADJUST menu screen.

Select the CLOCK ADJUST item on the TIME/DATE menu screen.

TIME/DATE menu screen

2.Set the date and time.

The blinking digit is the one to be set.

Displaying the Time and Date on the Screen

Whether or not the time and date should be displayed on the screen and how to display them are set on the TIME/DATE menu screen.

Date Time

1.Display the TIME/DATE menu screen.

1Select the TC/UB/CLOCK item on the TOP MENU screen.

2Select the TIME/DATE item on the TC/UB/CLOCK menu screen.

2.Set the TIME/DATE menu screen.

• DISPLAY item : Sets whether or not date and time should be displayed.

Displaying Time Code

The GY-HD250/GY-HD251 records SMPTE-standard (NTSC) or EBU-standard (PAL) time codes and user’s bits. In the play mode or the record mode, the reproduced time codes or user’s bits are shown on the LCD monitor or in the viewfinder.

•Time code generator data is output from the [TC OUT] ter- minal or [HD/SD-SDI] terminal.

The time codes or user’s bits can be shown on the LCD mon- itor or in the viewfinder during playback and recording as fol- lows. (Status screen)

Setting

1.Set the TC/UB item on the LCD/VF[3/4] menu screen to ON.

•Time codes or user’s bit data are displayed on the STATUS screen.

Time code indication

(Example)

Time code indication

00:00:00:00

Displayed Time Code/User’s Bit

•When TCG SOURCE on the TC/UB/CLOCK menu screen is set to INTERNAL, values from the built-in time code generator is displayed.

•When TCG SOURCE on the TC/UB/CLOCK menu screen is set to EXTERNAL, values from the external time code generator connected to the [TC IN] terminal is displayed.

•When TC DUPLI. on the TC/UB/CLOCK menu screen is set to ON in IEEE1394 input mode, values input in the [IEEE1394] terminal is displayed.

•Values recorded on the tape are displayed for PLAY mode.

Time code input entered the IEEE1394 connector

Pressing the STOP button for 1 second in the EJECT or stop mode displays the DV input time code data or user’s bit data from the IEEE1394 connector on the STATUS screen.

DTCG : The time code data from the IEEE1394 connector

DUBG : The user’s bit data from the IEEE1394 connector

To return to display of the original time code or user’s bit, press the STOP button. (Display of the normal time code or

Date

CLOCK ADJUST menu screen

Set to ON to display the indications.

• DISPLAY MODE : Sets the video output mode in

itemwhich date and time should be dis- played.

User’s bits indication

FF EE DD 20

user’s bit is also restored by performing VTR operation.)

MEMO

• To use input time code data from the IEEE1394 terminal,

Time (Hour:Min)

1When the SHUTTER dial is pressed, the blinking digit moves to the next digit.

2When the SHUTTER dial is rotated, the value of the blinking digit changes.

When the SHUTTER dial is rotated upward, the value becomes higher. When rotated downward, the value becomes smaller.

3Repeat the procedure described in 1 and 2 above to set the day, month, year, hours, minutes.

The digits indicating seconds cannot be set.

4Press the SHUTTER dial in sync with a time signal to enter the date and time precisely.

3.When all the settings are completed, rotate the SHUT- TER dial to align the cursor with the PAGE BACK item, and then press the SHUTTER dial.

• The TIME/DATE menu screen returns.

4.To return to the normal screen, use either of the following methods.

Press the STATUS button or

Return to the TOP MENU screen and then select the EXIT item on the TOP MENU screen before pressing the SHUTTER dial.

BARS

: Displayed when outputting the color

 

bar.

CAM

: Displayed when outputting the color

 

camera image.

BARS+CAM

: Date and time are always displayed.

• DISPLAY

: Sets the style in which the date and

STYLE item

time are displayed.

DATE+TIME

: Date and time are displayed.

DATE

: Date only is displayed.

TIME

: Time only is displayed.

„Display of date and time in the various operation modes.

In Camera mode

: The date and time of the internal

 

clock are displayed.

In VTR playback mode : The date and time recorded on the tape are displayed.

In VTR stop mode

: The last read date and time values

 

are displayed.

When an HDV/DV sig- : The date and time of the DV input nal is input from the are displayed in DV format. The IEEE1394 connector date and time of the internal clock

are displayed in HDV format.

STATUS 1 screen

2.Whether time codes or user’s bit data should be dis- played is selected with the TC DISPLAY switch inside the LCD door.

TC

: Time codes are displayed.

UB

: User’s bit data is displayed.

 

LCD BRIGHT

CAM/VTR

 

-

+

 

 

 

AUDIO SELECT

TC

 

CH-1

CH-2 DISPLAY

GENE.

 

AUTO

TC

FREE

 

MANU

UB

REC

 

 

 

REGEN

 

TC DISPLAY switch

TC GENE. switch

set TCG SOURCE item on the TC/UB/CLOCK menu

screen to INTERNAL.

• To record HDV/DV input time code and user’s bit from

the IEEE1394 connector, set the TC DUPLI. item on the

TC/UB/CLOCK menu screen to ON.

X See page 93.

• To maintain the continuity of time code data, use with the

TC GENE. switch set to REGEN mode when recording

HDV/DV input signal from the IEEE1394 connector.

• There is no time code display for HDV input.

CAUTION

A time code with a duration of more than 2 hours may not be displayed correctly by DV components for general con- sumer use, as some of these lack the capability to display longer time codes.

42

43

Page 80 Page 82
Image 81
Page 80 Page 82
Contents For Customer Use GY-HD200U/CHU Instructions GY-HD200E/CHE GY-HD201E/CHEImportant Safeguards Safety PrecautionsRemarque This symbol is only valid in the European Union Safety Precautions Cont’dInformation for Users on Disposal of Old Equipment European UnionSee For DC ×2/EarphoneSee pages 12, 36 SD memory card SeeContents Routine and Periodical Maintenance Precautions for Proper UsePrecautions for Use of Head Cleaning Tape Head CleaningCharacteristic CCD Phe- nomena Battery Pack to be UsedCondensation Videocassette to be UsedFront Section Zoom LensTh16 × 5.5BRMU MemoLCD Door Rear SectionRight Side Section Left Side Section Top Section Recording and Image Out- put Formats Setting Status Contents of Indications Status Screens in the Camera ModeIndications on the LCD Monitor and in the View- finder Status ScreensIndications on the LCD Monitor and in the Viewfinder Cont’d ContentsIndication Indication Contents NDF Magnified Status Indications on LCD MonitorSwitching between the LCD Screen and Viewfinder Display Alarm Message DisplayMenu Setting Screen Safety Zone Indication Camera mode onlyHow to Attach the View- finder Basic System Attaching the Zoom LensAttaching the Microphone Provided Inserting an SD Memory Card Attaching the Tripod Base OptionalAC Operation Battery OperationTurning the Power on Setting and Displaying Loading/Unloading the CassetteDate and Time Setting Displaying Time CodeDisplaying the Time and Date on the Screen Setting Presetting and Recording of Time CodePresetting time code data Presetting user’s bit dataAborting Preset Operation Presetting User’s BitAbout Time Code Mode Playing Back Time CodeViewfinder Adjustment Screen AdjustmentWhite Balance Adjustment Back Focus AdjustmentWhite Balance Adjustment Full Auto White Balance FAWSetting the Video Format White Shading AdjustmentSetting the Frame Rate Item Setting the REC ItemCamera Settings Audio Input Signal Selec- tionScreen Size 43/169 Mode Selection Basic Recording Opera- tion Audio Input Signal Selection Cont’dMonitoring Audio during Recording About the Focus Assist FunctionRecord-Standby or Stop mode If the Record-Standby Mode Contin- uesFunction/Initial Setting Header REC FunctionSearch Playback ProcedureHeader REC Function Executing the Header REC FunctionSignal Cables Connecting the VideoConnecting the IEEE1394 Cable Displaying AlarmsHDV/DV Dubbing Dubbing with AV DevicesSettings Backup RecordingHDV/DV Dubbing Cont’d OFFShutter Speed in 24p Mode Remote Control Unit Functions ListConnect a Remote Con- trol Unit RM-LP55/RM- LP57 ConnectionMenu Screen Configura- tion TOP Menu Screen Setting Menu ScreensSetting Description Function/Setting bold characters indicate initial settingsVideo FORMAT1/2 Menu Screen Frame RateVideo FORMAT2/2 Menu Screen Initial settings U model 7.5% E model 0.0%Menu Screen AutoHigh MiddleNormal 108%Stop StandardSwitch Mode menu screen is only displayed in camera mode Switch Mode Menu ScreenREC Item Setting for Step Setting for Variable White Balance Menu ScreenAUDIO/MIC1/2 Menu Screen AUDIO/MIC2/2 Menu ScreenMIX LCD/VF1/4 Menu Screen LCD/VF2/4 menu screen can only be set in camera modeLCD/VF2/4 Menu Screen 70-80%Screen is displayed in the VTR mode LCD/VF3/4 Menu ScreenLCD/VF4/4 Menu Screen TC/UB/CLOCK Menu Screen DisableHeader REC Menu Screen DropOTHERS1/2 Menu Screen TIME/DATE Menu Screen1394 OTHERS2/2 Menu ScreenSaving settings Loading a menu settings fileError displays File Manage Menu ScreenHow to Use Skin Detail Initializing formatting an SD mem- ory cardRotate How to Use Skin Detail Cont’d Using the Skin Detail FunctionOutputting Color Bars Display Status Action Blinking Pattern Remaining Battery/Tape Error Code Error Details This device Operation RemedyTroubleshooting How to Display the Hour MeterSymptoms Remedy Specifications External Dimensions unit mmHDV GY-HD251 Important Safeguards Safety PrecautionsRemarque Port Cable Length See Provided only for U model HD251CHEContents Precautions for Proper Use Routine and Periodical MaintenancePrecautions for Use of Head Cleaning Tape Characteristic CCD Phe- nomena Battery Pack to be UsedCondensation Videocassette to be UsedFront Section Zoom LensIris A/R Input GNDSetting, the time code always operates 4TC GENE. Time code generator setting switchAccording to the input level. When excessive Rear SectionPreset BGAIN Sensitivity selector switchRight Side Section EREC REC trigger button start/stop recordingRCA Left Side SectionTop Section Recording and Image Out- put Formats IeeeRecording Composite Indications on the LCD Monitor and in the View- finder Viewfinder Cont’d Indications on the LCD MonitorND2 Filter OFF ND1File Full Auto ON, OFF GainNDF EXTSafety Zone OFF Safety ZoneCenter Mark OFF DV-24PABasic System Attaching the Zoom Lens How to Attach the ViewFinder Attaching the Microphone ProvidedSDHC-compliant memory cards cannot be used with this device Inserting an SD Memory CardAC Operation Battery Operation„GY-HD250U „GY-HD251ETurning the Power on Loading/Unloading the Cassette Setting and DisplayingDate and Time VTRDisplaying Time Code Time code input entered the IEEE1394 connectorDisplayed Time Code/User’s Bit Time codes are displayedContinual time codes across different scenes Presetting and Recording of Time CodeTime code starts to run from the time it is Time code generator’s running method isPlaying Back Time Code Presetting the Time Code from the LCD ScreenInternal Free REC Regen InternalSlave unit GY-HD250U/GY-HD251E/GY-HD110U/GY- HD111E Blinks when the time code cannot be synchronizedExternal TC OUTScreen Adjustment Viewfinder Adjustment Back Focus AdjustmentAdjusted Adjust the position and angle of the viewfinder White Shading Adjustment White Balance AdjustmentSet the ND filter switch according to the current lighting When correct white balance is obtained, the approximateCamera Settings Setting the Video FormatScreen Size 43/169 Mode Selection ND FilterAudio Input Signal Selec- tion Basic Recording Opera- tion Header REC Function How to set the Header REC menu screenOutputting Audio Playback ProcedureFast-Forward, Rewind SearchSignal Cables Connecting the VideoRecording Composite Video Signals from an External Device Status Screen Display on the LCD Screen or ViewfinderSynchronized Signals Using Genlock Func- tionsAdjust SC and H Phase Dubbing with AV DevicesHDV/DV Dubbing Connect a Remote Con- trol Unit RM-LP55/RM- LP57 Backup RecordingConnect a Remote Control Unit RM-LP55/RM-LP57 Cont’d Menu Screen Configura- tionMenu Screen Configuration Cont’d Setting Menu ScreensVideo FORMAT1/2 Menu Screen TOP Menu ScreenOFF ExecuteVideo FORMAT1/2 Menu Screen Cont’d Video FORMAT2/2 Menu Screen3200K Menu ScreenMiddle HighNormal 108%Standard Preset White Balance Menu ScreenStop AUDIO/MIC1/2 Menu Screen Switch Mode Menu ScreenStep NoneLCD/VF1/4 Menu Screen AUDIO/MIC2/2 Menu ScreenMIX BlueLCD/VF3/4 Menu Screen LCD/VF2/4 Menu ScreenVoltage SECTC/UB/CLOCK Menu Screen LCD/VF4/4 Menu ScreenColor InternalTIME/DATE Menu Screen Header REC Menu ScreenOTHERS2/2 Menu Screen OTHERS1/2 Menu Screen3MIN BlinkOTHERS2/2 Menu Screen Cont’d Genlock Menu ScreenFile Manage Menu Screen 100 101How to Use Skin Detail If you want to change the range of colors recognized withSkin color detection function, follow the steps below Outputting Color Bars 104 105No HDV Signal No DV SignalSwitch Switch to VTRError Code Error Details GY-HD250/GY-HD251 Remedy Operation Troubleshooting How to Display the Hour MeterRGB? AUX input SpecificationsGenlock input HD/SD SDI outputCorrection
Top Page Image Contents