JVC GY-HD200U/CHU, GY-HD200E/CHE manual Error Code Error Details This device Operation Remedy

Page 55

OTHERS

Warnings and Responses (Cont’d)

Error code

Warning

•Warning Indications for VTR Abnormalities

Should malfunctions occur during VTR operation, this device self-diagnoses the cause and shows the diagnose together with an error code on the LCD monitor or in the viewfinder.

Error Code

Error Details

This device Operation

Remedy

0201

Indicates dew formation (condensa-

Operation stops. All opera-

Leave this device with the power ON,

CONDENSATION ON DRUM

tion).

tions are rejected.

until the indication disappears.

 

 

 

X See page 9.

3200

Tape cannot be loaded.

 

Switch the power OFF and then switch

LOADING FAILURE

 

 

it back ON. However, the tape may be

3300

Tape cannot be unloaded.

 

damaged depending on the circum-

UNLOADING FAILURE

 

 

stances. Please consult the person in

 

 

 

charge of professional video equip-

4100

Irregularity with eject operation.

 

 

ment at your nearest JVC-authorized

CASSETTE EJECT FAILURE

 

 

 

 

service agent.

 

 

 

5605 - 5609

Tape is cut.

Operation stops.

Press the EJECT button to take out the

DEFECTIVE TAPE

 

 

cassette.

 

 

 

If the tape runs out during recording,

 

 

 

switch the power OFF and then switch

 

 

 

it back ON, press the EJECT button,

 

 

 

and then take out the cassette.

5702

Tape end sensor error.

Operation stops. All opera-

Switch the power OFF and then switch

TAPE END DET. ERROR

 

tions are rejected.

it back ON. However, the tape may be

5802

Tape beginning sensor error.

 

damaged depending on the circum-

TAPE BEGIN DET. ERROR

 

 

stances. Please consult the person in

 

 

 

charge of professional video equip-

7001

Drum rotation error.

 

 

ment at your nearest JVC-authorized

DRUM MOTOR FAILURE

 

 

 

 

service agent.

7101

Capstan rotation error.

 

 

 

CAP MOTOR FAILURE

 

 

 

7202 - 7203

Supply reel rotation error.

 

 

SUPPLY REEL FAILURE

 

 

 

7302 - 7303

Take up reel rotation error.

 

 

TAKE UP REEL FAILURE

 

 

 

7305

Take up reel rotation error when un-

 

 

TAKE UP REEL FAILURE

loading.

 

 

8000

Tape problem detected.

 

 

EMERGENCY TAPE!

 

 

 

TURN POWER OFF.

System error when power is turned on.

HDV/DV LED, VTR indicator

Turn off the power and let this device

TURN BACK ON LATER.

 

and TALLY lamp flash. Only

sit for sometime before turning it back

 

 

POWER switch operation is

on.

 

 

accepted.

 

„TALLY lamp

Blinks when remaining battery power or tape is low. (Only in Camera mode)

Blinking Pattern

Remaining Battery/Tape

Slow blinking

• Remaining battery power is low.

(once per sec.)

• Remaining tape time is equivalent to less

 

than 3 minutes.

Fast blinking

• Tape has run out.

(four times per sec.)

• Irregularity has occurred in the VTR.

„Alarm Sound

When remaining battery power becomes low, a warning sound is output from the monitoring loudspeaker and the PHONES jack.

(In Camera mode only)

When an irregularity occurs in the VTR, a warning sound is also output.

Whether or not alarm sound should be output and the vol- ume level are selected with the ALARM VR LEVEL item on the OTHERS[1/2] menu screen.

„Depending on the alarm conditions, the warning indicators on the LCD monitor/viewfinder screen, the TALLY lamp, and alarm sounds appear as shown in the following table.

Alarm Indications on LCD Monitor/

TALLY lamp

Alarm Sound

Condition

Viewfinder Screen

 

 

 

VTR alarm indication

 

 

 

Dew formation (condensation) or error has oc-

(Example)

 

I

 

curred in the VTR.

 

 

 

 

 

 

J

 

About 3 min. before tape end

 

 

 

(displayed during recording).

 

 

I

 

Tape end

 

 

 

(displayed during recording).

 

 

J

 

Remaining battery power is low.

 

 

 

 

Display symbols

J : Blinking once per second.

I

: Blinking four times per second.

 

: Sound interrupted once per second.

: Continuous sound.

104

105

Page 54 Page 56
Image 55
Page 54 Page 56
Contents For Customer Use GY-HD200U/CHU Instructions GY-HD200E/CHE GY-HD201E/CHESafety Precautions Important SafeguardsRemarque European Union Safety Precautions Cont’dThis symbol is only valid in the European Union Information for Users on Disposal of Old EquipmentSD memory card See For DC ×2/EarphoneSee See pages 12, 36Contents Head Cleaning Precautions for Proper UseRoutine and Periodical Maintenance Precautions for Use of Head Cleaning TapeVideocassette to be Used Battery Pack to be UsedCharacteristic CCD Phe- nomena CondensationMemo Zoom LensFront Section Th16 × 5.5BRMULCD Door Rear SectionRight Side Section Left Side Section Top Section Recording and Image Out- put Formats Status Screens Status Screens in the Camera ModeSetting Status Contents of Indications Indications on the LCD Monitor and in the View- finderIndications on the LCD Monitor and in the Viewfinder Cont’d ContentsIndication Indication Contents NDF Magnified Status Indications on LCD MonitorSafety Zone Indication Camera mode only Alarm Message DisplaySwitching between the LCD Screen and Viewfinder Display Menu Setting ScreenBasic System Attaching the Zoom Lens How to Attach the View- finderAttaching the Microphone Provided Inserting an SD Memory Card Attaching the Tripod Base OptionalAC Operation Battery OperationTurning the Power on Loading/Unloading the Cassette Setting and DisplayingDate and Time Displaying Time Code SettingDisplaying the Time and Date on the Screen Presetting user’s bit data Presetting and Recording of Time CodeSetting Presetting time code dataPlaying Back Time Code Presetting User’s BitAborting Preset Operation About Time Code ModeViewfinder Adjustment Screen AdjustmentFull Auto White Balance FAW Back Focus AdjustmentWhite Balance Adjustment White Balance AdjustmentSetting the REC Item White Shading AdjustmentSetting the Video Format Setting the Frame Rate ItemAudio Input Signal Selec- tion Camera SettingsScreen Size 43/169 Mode Selection About the Focus Assist Function Audio Input Signal Selection Cont’dBasic Recording Opera- tion Monitoring Audio during RecordingHeader REC Function If the Record-Standby Mode Contin- uesRecord-Standby or Stop mode Function/Initial SettingExecuting the Header REC Function Playback ProcedureSearch Header REC FunctionDisplaying Alarms Connecting the VideoSignal Cables Connecting the IEEE1394 CableHDV/DV Dubbing Dubbing with AV DevicesOFF Backup RecordingSettings HDV/DV Dubbing Cont’dConnection Remote Control Unit Functions ListShutter Speed in 24p Mode Connect a Remote Con- trol Unit RM-LP55/RM- LP57Menu Screen Configura- tion TOP Menu Screen Setting Menu ScreensFrame Rate Function/Setting bold characters indicate initial settingsSetting Description Video FORMAT1/2 Menu ScreenAuto Initial settings U model 7.5% E model 0.0%Video FORMAT2/2 Menu Screen Menu Screen108% MiddleHigh NormalStop StandardWhite Balance Menu Screen Switch Mode Menu ScreenSwitch Mode menu screen is only displayed in camera mode REC Item Setting for Step Setting for VariableAUDIO/MIC2/2 Menu Screen AUDIO/MIC1/2 Menu ScreenMIX 70-80% LCD/VF2/4 menu screen can only be set in camera modeLCD/VF1/4 Menu Screen LCD/VF2/4 Menu ScreenLCD/VF3/4 Menu Screen Screen is displayed in the VTR modeLCD/VF4/4 Menu Screen Drop DisableTC/UB/CLOCK Menu Screen Header REC Menu ScreenOTHERS1/2 Menu Screen TIME/DATE Menu Screen1394 OTHERS2/2 Menu ScreenFile Manage Menu Screen Loading a menu settings fileSaving settings Error displaysInitializing formatting an SD mem- ory card How to Use Skin DetailRotate Using the Skin Detail Function How to Use Skin Detail Cont’dOutputting Color Bars Display Status Action Blinking Pattern Remaining Battery/Tape Error Code Error Details This device Operation RemedyHow to Display the Hour Meter TroubleshootingSymptoms Remedy External Dimensions unit mm SpecificationsHDV GY-HD251 Safety Precautions Important SafeguardsRemarque Port Cable Length See Provided only for U model HD251CHEContents Routine and Periodical Maintenance Precautions for Proper UsePrecautions for Use of Head Cleaning Tape Videocassette to be Used Battery Pack to be UsedCharacteristic CCD Phe- nomena CondensationGND Zoom LensFront Section Iris A/R InputRear Section 4TC GENE. Time code generator setting switchSetting, the time code always operates According to the input level. When excessiveEREC REC trigger button start/stop recording BGAIN Sensitivity selector switchPreset Right Side SectionRCA Left Side SectionTop Section Ieee Recording and Image Out- put FormatsRecording Composite Indications on the LCD Monitor and in the View- finder Viewfinder Cont’d Indications on the LCD MonitorFull Auto ON, OFF Gain Filter OFF ND1ND2 FileNDF EXTDV-24PA Safety ZoneSafety Zone OFF Center Mark OFFAttaching the Microphone Provided How to Attach the ViewBasic System Attaching the Zoom Lens FinderSDHC-compliant memory cards cannot be used with this device Inserting an SD Memory Card„GY-HD251E Battery OperationAC Operation „GY-HD250UTurning the Power on VTR Setting and DisplayingLoading/Unloading the Cassette Date and TimeTime codes are displayed Time code input entered the IEEE1394 connectorDisplaying Time Code Displayed Time Code/User’s BitTime code generator’s running method is Presetting and Recording of Time CodeContinual time codes across different scenes Time code starts to run from the time it isFree REC Regen Internal Presetting the Time Code from the LCD ScreenPlaying Back Time Code InternalTC OUT Blinks when the time code cannot be synchronizedSlave unit GY-HD250U/GY-HD251E/GY-HD110U/GY- HD111E ExternalBack Focus Adjustment Screen Adjustment Viewfinder AdjustmentAdjusted Adjust the position and angle of the viewfinder When correct white balance is obtained, the approximate White Balance AdjustmentWhite Shading Adjustment Set the ND filter switch according to the current lightingND Filter Setting the Video FormatCamera Settings Screen Size 43/169 Mode SelectionAudio Input Signal Selec- tion Basic Recording Opera- tion Header REC Function How to set the Header REC menu screenSearch Playback ProcedureOutputting Audio Fast-Forward, RewindStatus Screen Display on the LCD Screen or Viewfinder Connecting the VideoSignal Cables Recording Composite Video Signals from an External DeviceDubbing with AV Devices Using Genlock Func- tionsSynchronized Signals Adjust SC and H PhaseHDV/DV Dubbing Connect a Remote Con- trol Unit RM-LP55/RM- LP57 Backup RecordingConnect a Remote Control Unit RM-LP55/RM-LP57 Cont’d Menu Screen Configura- tionMenu Screen Configuration Cont’d Setting Menu ScreensExecute TOP Menu ScreenVideo FORMAT1/2 Menu Screen OFFVideo FORMAT1/2 Menu Screen Cont’d Video FORMAT2/2 Menu ScreenHigh Menu Screen3200K Middle108% NormalStandard White Balance Menu Screen PresetStop None Switch Mode Menu ScreenAUDIO/MIC1/2 Menu Screen StepBlue AUDIO/MIC2/2 Menu ScreenLCD/VF1/4 Menu Screen MIXSEC LCD/VF2/4 Menu ScreenLCD/VF3/4 Menu Screen VoltageInternal LCD/VF4/4 Menu ScreenTC/UB/CLOCK Menu Screen ColorTIME/DATE Menu Screen Header REC Menu ScreenBlink OTHERS1/2 Menu ScreenOTHERS2/2 Menu Screen 3MINOTHERS2/2 Menu Screen Cont’d Genlock Menu ScreenFile Manage Menu Screen 100 101If you want to change the range of colors recognized with How to Use Skin DetailSkin color detection function, follow the steps below Outputting Color Bars 104 105Switch to VTR No DV SignalNo HDV Signal SwitchError Code Error Details GY-HD250/GY-HD251 Remedy Operation How to Display the Hour Meter TroubleshootingRGB? HD/SD SDI output SpecificationsAUX input Genlock inputCorrection
Top Page Image Contents