JVC GY-HD200U/CHU, GY-HD200E/CHE, GY-HD201E/CHE manual Right Side Section

Page 10

CONTROLS, INDICATORS AND CONNECTORS

Right Side Section

X See “LCD/VF[1/4] Menu Screen” on page 86.

7Clamp

Attach the cable from the viewfinder here.

8[USER1/2/3] User buttons

You can assign camera functions to the USER1 - 3 but- tons.

a[STATUS] Status/Menu button

• Pressing this button in the normal screen mode (condi-

tion in which the menu screen is not shown) displays a

status screen in the viewfinder or on the LCD monitor.

The displayed status screen changes each time the but-

ton is pressed.

X See “Status Screens” on page 22.

d[POWER] Power ON/OFF switch Switch that turns the power ON/OFF.

When the power is OFF, “POFF” is displayed in the LCD monitor or viewfinder.

*Wait at least 5 seconds if you need to turn the power on again.

7 6

2 1

5 4 3

i h

Use them to switch shooting conditions depending upon the subject.

Set them using the USER1 - 3 items in the SWITCH MODE menu screen.

X See page 83.

Use this button to preset the time code. X See page 46.

• Pressing this button for more than 1 second in the nor-

mal screen mode displays the menu screen in the view-

finder or on the LCD monitor. Pressing this button while

the menu screen is displayed in the viewfinder or on the

LCD monitor makes the menu screen disappear.

X See “Setting Menu Screens” on page 72.

b[GAIN] Sensitivity selector switch

e[REC] REC trigger button (start/stop recording) Start and stop recording using this button.

(This works together with the REC trigger button on the top and the lens VTR trigger button.)

When “SPLIT” is set for the 1394 REC TRIGGER item on the OTHERS[2/2] menu screen, this button becomes the start/stop recording button for an external device. X See page 94.

 

 

VF BRIGHT

8

 

 

 

USER 1 USER 2

USER 3

9

ND FILTER

 

0

2

 

1

 

MENU

 

a

STATUS

b

c

POWERREC

d e f g

1Monitoring speaker (Cheek pad)

•In the Camera mode, the input sound can be EE moni- tored.

In the VTR mode, the speaker outputs the VTR play- back sound. In the VTR mode, the HDV/DV input sound can be EE monitored. (HDV/DV signal input is possible with the GY-HD200U/GY-HD201E.)

The sound to be output is selected with the MONITOR SELECT switch d on page 19.

•The sound level is adjusted with the MONITOR sound level volume 3. This speaker also outputs various warning sounds superimposed on other sound.

X See “Alarm Sound” on page 105.

2Cheek pad set screw

Screw for adjusting the height of the cheek pad.

3[MONITOR] Audio monitor volume control

Adjusts the volume of the monitoring loudspeaker and ear- phone.

4[VF BRIGHT] Viewfinder brightness adjustment To adjust the brightness of the viewfinder.

X See page 49.

5[PEAKING] Contour adjustment

To adjust the contours of the LCD monitor and viewfinder image.

* When the Focus Assist function is running, this control does not operate.

X See page 49.

6[FOCUS ASSIST] Focus assist button

When you press this button during shooting, the area of focus is displayed in blue, red or green, making it easy to focus accurately.

MEMO

•When FOCUS ASSIST on the LCD/VF[1/4] menu screen is set to ACCU-FOCUS and this button is pressed, ACCU FOCUS functions with FOCUS ASSIST. This makes depth of field shallower, making it easier to focus.

•This button has the same function as the FOCUS ASSIST button 7 in the Top Section.

MEMO

•The USER buttons work together with the menu settings.

•When a menu screen is being displayed, they also func- tion as menu operation buttons. X See “Setting Menu Screens” on page 72.

9[SHUTTER] Shutter/Menu dial

•Every time this dial is pressed while in the normal screen mode (when the menu screen is not displayed), the shutter speed switches between on/off.

•When this dial is turned 1 click up or down in the normal screen mode, the shutter speed indicator is shown for about 3 seconds on the LCD monitor or in the view- finder. The shutter speed is changed when this dial is turned while the shutter speed indicator is shown.

X See page 83.

•When this dial turned upward or downward while the menu screen is displayed, the cursor (K) also moves upward or downward to allow selection of items in the menu. To change the setting value of the item, press this dial. When the setting value starts blinking, turn this dial upward or downward to change the setting.

X See “Setting Menu Screens” on page 72.

0[ND FILTER] ND filter switch Switches the built-in ND filter.

OFF : Turns the filter OFF (FILTER OFF)

1: Cuts the light intensity to approximately 1/4. (1/4ND)

2: Cuts the light intensity to approximately 1/16. (1/16ND)

When you change this switch, the type of the new ND filter is displayed in the LCD monitor or viewfinder.

CAUTION

If you switch the ND filter while shooting is in progress, the picture may be disturbed or noise may occur in the audio. X See “Camera Settings” on page 54.

Electronically boosts the light sensitivity when there is insufficient illumination on the subject.

The boosting level differs depending on the switch position as follows:

(Factory presets)

L: 0 dB (no boosting is applied)

M: 9 dB (boosted to approximately 3 times the original)

H: 18 dB (boosted to approximately 8 times the original)

• The boosting level for each switch position can be changed with the SWITCH MODE menu screen.

X See page 83.

The more the boosting level is increased, the more the resulting image will be noisy.

• When the FULL AUTO switch g on page 19 is “ON”, this is fixed at “ALC”.

c[WHT.BAL] White balance switch

Three white balance modes are selectable with this switch.

B: Switch into white balance mode memorized in B. If white balance is performed with the switch in this position, it will be memorized

into B.

A: Switch into white balance mode memorized in A. If white balance is performed with the

switch in this position, it will be memorized into A.

PRST : Switch into white balance mode (3200K or (PRESET) 5600K) set in PRESET TEMP. item on the

CAMERA OPERATION menu screen. X See page 77.

FAW (Full Auto White Balance) mode can be set to A, B or PRESET with the SWITCH MODE menu screen.

X See page 83.

In the FAW mode, video color temperatures are constantly sampled for automatic adjustment to a proper white bal- ance.

•When the FULL AUTO switch g on page 19 is “ON”, this is fixed at “FAW”.

MEMO

Fine-tune red and blue to match the white adjusted in auto white balance in WHITE PAINT<R>/<B> on the WHITE BALANCE menu screen. (Available only when this switch is set to A or B.)

X See “WHITE BALANCE Menu Screen” on page 82.

X See “Backup Recording” on page 67.

f[CH-1/CH-2 AUDIO LEVEL] CH-1/CH-2 Audio level con- trols and AUTO LED

Allow you to adjust the audio level for the CH-1 and CH-2 audio channels.

•To use these controls, set the CH-1/CH-2 AUDIO SELECT switch 2 on page 13 to “MANU”.

•When the FULL AUTO switch g on page 19 or the CH- 1/CH-2 AUDIO SELECT switch 2 on page 13 is set to “AUTO”, “AUTO” LED lights. (The audio level controls do not work.)

g[HDV/DV LED]

•In camera mode, this lights according to the setting for the video format being shot.

•In VTR mode, it lights according to the video format being recorded on tape or the IEEE1394 input video for- mat.

HDV

: Lights when the format is HDV.

DV

: Lights when the format is DV.

HDV/DV : Turns off when the format is 1080i.

MEMO

•During a system error, HDV/DV flash alternately. X See page 104.

•Select whether or not to have this light in the FORMAT

LED item on the OTHERS[1/2] menu screen. X See page 93.

hLCD door lock and release knob

To open the LCD door, move this knob on the direction toward the rear section.

iLCD door

LCD monitor door.

The LCD monitor is located on the inner side of the door. The LCD monitor can be viewed when this door is opened. The door can be turned to change the orientation of the LCD monitor, and it can be rotated so that it can be accommodated in the main body of the camera.

X See page 49.

14

15

Page 9 Page 11
Image 10
Page 9 Page 11
Contents GY-HD200U/CHU Instructions GY-HD200E/CHE GY-HD201E/CHE For Customer UseSafety Precautions Important SafeguardsRemarque Information for Users on Disposal of Old Equipment Safety Precautions Cont’dThis symbol is only valid in the European Union European UnionSee pages 12, 36 For DC ×2/EarphoneSee SD memory card SeeContents Precautions for Use of Head Cleaning Tape Precautions for Proper UseRoutine and Periodical Maintenance Head CleaningCondensation Battery Pack to be UsedCharacteristic CCD Phe- nomena Videocassette to be UsedTh16 × 5.5BRMU Zoom LensFront Section MemoRear Section LCD DoorRight Side Section Left Side Section Top Section Recording and Image Out- put Formats Indications on the LCD Monitor and in the View- finder Status Screens in the Camera ModeSetting Status Contents of Indications Status ScreensContents Indications on the LCD Monitor and in the Viewfinder Cont’dIndication Indication Contents Magnified Status Indications on LCD Monitor NDFMenu Setting Screen Alarm Message DisplaySwitching between the LCD Screen and Viewfinder Display Safety Zone Indication Camera mode onlyBasic System Attaching the Zoom Lens How to Attach the View- finderAttaching the Microphone Provided Attaching the Tripod Base Optional Inserting an SD Memory CardBattery Operation AC OperationTurning the Power on Loading/Unloading the Cassette Setting and DisplayingDate and Time Displaying Time Code SettingDisplaying the Time and Date on the Screen Presetting time code data Presetting and Recording of Time CodeSetting Presetting user’s bit dataAbout Time Code Mode Presetting User’s BitAborting Preset Operation Playing Back Time CodeScreen Adjustment Viewfinder AdjustmentWhite Balance Adjustment Back Focus AdjustmentWhite Balance Adjustment Full Auto White Balance FAWSetting the Frame Rate Item White Shading AdjustmentSetting the Video Format Setting the REC ItemAudio Input Signal Selec- tion Camera SettingsScreen Size 43/169 Mode Selection Monitoring Audio during Recording Audio Input Signal Selection Cont’dBasic Recording Opera- tion About the Focus Assist FunctionFunction/Initial Setting If the Record-Standby Mode Contin- uesRecord-Standby or Stop mode Header REC FunctionHeader REC Function Playback ProcedureSearch Executing the Header REC FunctionConnecting the IEEE1394 Cable Connecting the VideoSignal Cables Displaying AlarmsDubbing with AV Devices HDV/DV DubbingHDV/DV Dubbing Cont’d Backup RecordingSettings OFFConnect a Remote Con- trol Unit RM-LP55/RM- LP57 Remote Control Unit Functions ListShutter Speed in 24p Mode ConnectionMenu Screen Configura- tion Setting Menu Screens TOP Menu ScreenVideo FORMAT1/2 Menu Screen Function/Setting bold characters indicate initial settingsSetting Description Frame RateMenu Screen Initial settings U model 7.5% E model 0.0%Video FORMAT2/2 Menu Screen AutoNormal MiddleHigh 108%Standard StopREC Item Setting for Step Setting for Variable Switch Mode Menu ScreenSwitch Mode menu screen is only displayed in camera mode White Balance Menu ScreenAUDIO/MIC2/2 Menu Screen AUDIO/MIC1/2 Menu ScreenMIX LCD/VF2/4 Menu Screen LCD/VF2/4 menu screen can only be set in camera modeLCD/VF1/4 Menu Screen 70-80%LCD/VF3/4 Menu Screen Screen is displayed in the VTR modeLCD/VF4/4 Menu Screen Header REC Menu Screen DisableTC/UB/CLOCK Menu Screen DropTIME/DATE Menu Screen OTHERS1/2 Menu ScreenOTHERS2/2 Menu Screen 1394Error displays Loading a menu settings fileSaving settings File Manage Menu ScreenInitializing formatting an SD mem- ory card How to Use Skin DetailRotate Using the Skin Detail Function How to Use Skin Detail Cont’dOutputting Color Bars Display Status Action Error Code Error Details This device Operation Remedy Blinking Pattern Remaining Battery/TapeHow to Display the Hour Meter TroubleshootingSymptoms Remedy External Dimensions unit mm SpecificationsHDV GY-HD251 Safety Precautions Important SafeguardsRemarque Port Cable Length HD251CHE See Provided only for U modelContents Routine and Periodical Maintenance Precautions for Proper UsePrecautions for Use of Head Cleaning Tape Condensation Battery Pack to be UsedCharacteristic CCD Phe- nomena Videocassette to be UsedIris A/R Input Zoom LensFront Section GNDAccording to the input level. When excessive 4TC GENE. Time code generator setting switchSetting, the time code always operates Rear SectionRight Side Section BGAIN Sensitivity selector switchPreset EREC REC trigger button start/stop recordingLeft Side Section RCATop Section Ieee Recording and Image Out- put FormatsRecording Composite Indications on the LCD Monitor and in the View- finder Indications on the LCD Monitor Viewfinder Cont’dFile Filter OFF ND1ND2 Full Auto ON, OFF GainEXT NDFCenter Mark OFF Safety ZoneSafety Zone OFF DV-24PAFinder How to Attach the ViewBasic System Attaching the Zoom Lens Attaching the Microphone ProvidedInserting an SD Memory Card SDHC-compliant memory cards cannot be used with this device„GY-HD250U Battery OperationAC Operation „GY-HD251ETurning the Power on Date and Time Setting and DisplayingLoading/Unloading the Cassette VTRDisplayed Time Code/User’s Bit Time code input entered the IEEE1394 connectorDisplaying Time Code Time codes are displayedTime code starts to run from the time it is Presetting and Recording of Time CodeContinual time codes across different scenes Time code generator’s running method isInternal Presetting the Time Code from the LCD ScreenPlaying Back Time Code Free REC Regen InternalExternal Blinks when the time code cannot be synchronizedSlave unit GY-HD250U/GY-HD251E/GY-HD110U/GY- HD111E TC OUTBack Focus Adjustment Screen Adjustment Viewfinder AdjustmentAdjusted Adjust the position and angle of the viewfinder Set the ND filter switch according to the current lighting White Balance AdjustmentWhite Shading Adjustment When correct white balance is obtained, the approximateScreen Size 43/169 Mode Selection Setting the Video FormatCamera Settings ND FilterAudio Input Signal Selec- tion Basic Recording Opera- tion How to set the Header REC menu screen Header REC FunctionFast-Forward, Rewind Playback ProcedureOutputting Audio SearchRecording Composite Video Signals from an External Device Connecting the VideoSignal Cables Status Screen Display on the LCD Screen or ViewfinderAdjust SC and H Phase Using Genlock Func- tionsSynchronized Signals Dubbing with AV DevicesHDV/DV Dubbing Backup Recording Connect a Remote Con- trol Unit RM-LP55/RM- LP57Menu Screen Configura- tion Connect a Remote Control Unit RM-LP55/RM-LP57 Cont’dSetting Menu Screens Menu Screen Configuration Cont’dOFF TOP Menu ScreenVideo FORMAT1/2 Menu Screen ExecuteVideo FORMAT2/2 Menu Screen Video FORMAT1/2 Menu Screen Cont’dMiddle Menu Screen3200K High108% NormalStandard White Balance Menu Screen PresetStop Step Switch Mode Menu ScreenAUDIO/MIC1/2 Menu Screen NoneMIX AUDIO/MIC2/2 Menu ScreenLCD/VF1/4 Menu Screen BlueVoltage LCD/VF2/4 Menu ScreenLCD/VF3/4 Menu Screen SECColor LCD/VF4/4 Menu ScreenTC/UB/CLOCK Menu Screen InternalHeader REC Menu Screen TIME/DATE Menu Screen3MIN OTHERS1/2 Menu ScreenOTHERS2/2 Menu Screen BlinkGenlock Menu Screen OTHERS2/2 Menu Screen Cont’d100 101 File Manage Menu ScreenIf you want to change the range of colors recognized with How to Use Skin DetailSkin color detection function, follow the steps below 104 105 Outputting Color BarsSwitch No DV SignalNo HDV Signal Switch to VTRError Code Error Details GY-HD250/GY-HD251 Remedy Operation How to Display the Hour Meter TroubleshootingRGB? Genlock input SpecificationsAUX input HD/SD SDI outputCorrection
Top Page Image Contents