JVC GY-HD201E/CHE, GY-HD200E/CHE manual AUDIO/MIC2/2 Menu Screen, LCD/VF1/4 Menu Screen, Mix, Blue

Page 104

MENU SCREENS

AUDIO/MIC[2/2] Menu

Screen

In VTR mode, the screen changes to the AUDIO menu screen.

Item

 

 

Function/Setting (bold characters indicate initial settings)

 

AUDIO MONITOR

 

Selects whether stereo or mixed audio is output from the PHONES jack when the MONITOR SELECT switch is set

 

 

to BOTH.

 

 

 

STEREO

: Stereo audio (CH-1 audio is output to L and CH-2 audio is output to R)

 

 

* Outputs only the CH-1 audio from the monitor speaker.

 

 

MIX

: Mixed audio (CH-1 and CH-2 mixed audio is output to L and R)

 

FAS AUDIO

Selects the recording level adjusting method for FAS (Full Auto Shooting). (CH-1, CH-2)

 

 

AUTO

: Sets to AUTO.

 

 

SW SET

: Follows settings for the AUDIO SELECT switch.

 

 

X See “2 [CH-1/CH-2 AUDIO SELECT] switch” on page 13.

 

 

X See “g [FULL AUTO] switch” on page 19.

 

SEARCH AUDIO [DV]

Selects whether to output audio when searching a tape recorded in DV format. (This also includes slow playback.)

 

 

ON

: Audio is output.

 

 

OFF

: Audio is not output.

 

PB AUDIO CH [DV]

Selects which channel audio to output when playing back a DV tape with the audio signal recorded in 4 channels.

 

 

(Can only be set in VTR mode)

 

 

CH1/2

: Outputs the CH-1 and CH-2 channel audio.

 

 

 

 

GY-HD250/GY-HD251 records the audio in CH-1 and CH-2 while shooting.

 

 

MIX

: Outputs all 4 channels of audio at the same time.

 

 

CH3/4

: Outputs the CH-3 and CH-4 channel audio.

 

 

 

MEMO

 

 

 

 

GY-HD250/GY-HD251 does not have a function for dubbing to the CH-3 and CH-4 channels.

 

 

 

 

 

 

 

 

PAGE BACK

When the cursor is in this position, press the SHUTTER dial to the AUDIO/MIC[1/2] menu screen.

 

LCD/VF[1/4] Menu Screen

The LCD/VF menu screen consists of four screens. (1/4 screen, 2/4 screen, 3/4 screen, 4/4 screen) The LCD/VF[1/4] menu screen can only be set in camera mode.

In VTR mode, this screen consists of two screens. (1/2 screen, 2/2 screen)

 

Item

 

 

Function/Setting (bold characters indicate initial settings)

 

ZEBRA

Switches the luminance level of the subject sections where the zebra pattern is displayed.

 

 

 

60-70%

: Zebra pattern is displayed in sections with luminance levels between 60% and 70%.

 

 

 

70-80%

: Zebra pattern is displayed in sections with luminance levels between 70% and 80%.

 

 

 

85-95%

: Zebra pattern is displayed in sections with luminance levels between 85% and 95%.

 

 

 

OVER95%

: Zebra pattern is displayed in sections with luminance levels over 95%.

 

 

 

OVER100%

: Zebra pattern is displayed in sections with luminance levels over 100%.

 

F. NO/IRIS IND.

Selects whether or not the F-number of the lens iris/iris level mark is displayed in the status display on the LCD mon-

 

 

 

itor or in the viewfinder. (STATUS 1 screen)

 

 

 

OFF

: F-number and iris level mark is not displayed.

 

 

 

F.NO

: F-number is displayed.

 

 

 

F.NO+IND.

: F-number and iris level mark is displayed.

 

FILTER

 

Selects whether or not the FILTER position of this device is displayed in the status display on the LCD monitor or in

 

 

 

the viewfinder. (STATUS 1 screen)

 

 

 

OFF

: FILTER position is not displayed.

 

 

 

ON

: FILTER position is displayed.

 

SAFETY ZONE*1

Selects whether or not the safety zone is shown on the LCD monitor or in the viewfinder together with the form of

 

 

 

the safety zone indication.

 

 

 

OFF

: Not displayed.

 

 

 

4:3

: 4:3 zone is displayed.

 

 

 

14:9

: 14:9 zone is displayed.

 

 

 

16:9

: 16:9 zone is displayed.

 

 

 

16:9+4:3

: 16:9 zone and 4:3 zone are display mixed. (This cannot be selected when DV format is set.)

 

 

 

2.35:1 CE

: Displays 2.35:1 zone in the middle of the screen.

 

 

 

 

 

(Only in HDV format or 24P or 25P mode)

 

 

 

2.35:1 CH

: Displays 2.35:1 zone at the top of the screen.

 

 

 

 

 

(Only in HDV format or 24P or 25P mode)

 

CENTER MARK*1

Sets whether or not a center mark is displayed when the safety zone is displayed.

 

 

 

ON

: Center mark is displayed.

 

 

 

OFF

: Center mark is not displayed.

 

 

 

 

MEMO

 

 

 

 

 

When the SAFETY ZONE item is set to OFF, “- - -” is indicated and this item cannot be selected.

 

 

 

 

 

 

 

 

 

FOCUS ASSIST

Sets the FOCUS ASSIST function. Press the [FOCUS ASSIST] button on page 14 (6) or page 18 (7) to operate

 

 

 

the FOCUS ASSIST function.

 

 

 

NORMAL

: Only the [FOCUS ASSIST] function operates.

 

 

 

 

 

(The focus area becomes blue, red or green, making it easier to focus.)

 

 

 

ACCU-FOCUS

: The FOCUS ASSIST function and ACCU-FOCUS (forced focus) function operates.

 

 

 

 

 

This makes the depth of field shallower, making it easier to focus. ACCU FOCUS automatically

 

 

 

 

 

turns OFF after approximately 10 seconds.

 

 

COLOR

 

Sets the display color for focusing when running the FOCUS ASSIST function.

 

 

 

BLUE

: Displays the area of focus in blue.

 

 

 

RED

: Displays the area of focus in red.

 

 

 

GREEN

: Displays the area of focus in green.

 

 

LEVEL

Sets the display range of the focal area when the FOCUS ASSIST function is in use.

 

 

 

LOW

: Displays the focal area narrower than MIDDLE.

 

 

 

MIDDLE

: Displays the focal area in normal setting.

 

 

 

HIGH

: Displays the focal area wider than MIDDLE.

 

NEXT PAGE

When you display the LCD/VF[2/4] menu screen, move the cursor to this position and press the SHUTTER dial.

 

PAGE BACK

When the cursor is in this position, press the SHUTTER dial to return to the TOP MENU screen.

 

*1 SAFETY ZONE and CENTER MARK will not be displayed when this device is in VTR mode (PLAY, STL, FWD, REV).

88

89

Page 103 Page 105
Image 104
Page 103 Page 105
Contents GY-HD200U/CHU Instructions GY-HD200E/CHE GY-HD201E/CHE For Customer UseRemarque Important SafeguardsSafety Precautions Safety Precautions Cont’d This symbol is only valid in the European UnionInformation for Users on Disposal of Old Equipment European UnionFor DC ×2/Earphone SeeSee pages 12, 36 SD memory card SeeContents Precautions for Proper Use Routine and Periodical MaintenancePrecautions for Use of Head Cleaning Tape Head CleaningBattery Pack to be Used Characteristic CCD Phe- nomenaCondensation Videocassette to be UsedZoom Lens Front SectionTh16 × 5.5BRMU MemoRear Section LCD DoorRight Side Section Left Side Section Top Section Recording and Image Out- put Formats Status Screens in the Camera Mode Setting Status Contents of IndicationsIndications on the LCD Monitor and in the View- finder Status ScreensContents Indications on the LCD Monitor and in the Viewfinder Cont’dIndication Indication Contents Magnified Status Indications on LCD Monitor NDFAlarm Message Display Switching between the LCD Screen and Viewfinder DisplayMenu Setting Screen Safety Zone Indication Camera mode onlyAttaching the Microphone Provided How to Attach the View- finderBasic System Attaching the Zoom Lens Attaching the Tripod Base Optional Inserting an SD Memory CardBattery Operation AC OperationTurning the Power on Date and Time Setting and DisplayingLoading/Unloading the Cassette Displaying the Time and Date on the Screen SettingDisplaying Time Code Presetting and Recording of Time Code SettingPresetting time code data Presetting user’s bit dataPresetting User’s Bit Aborting Preset OperationAbout Time Code Mode Playing Back Time CodeScreen Adjustment Viewfinder AdjustmentBack Focus Adjustment White Balance AdjustmentWhite Balance Adjustment Full Auto White Balance FAWWhite Shading Adjustment Setting the Video FormatSetting the Frame Rate Item Setting the REC ItemScreen Size 43/169 Mode Selection Camera SettingsAudio Input Signal Selec- tion Audio Input Signal Selection Cont’d Basic Recording Opera- tionMonitoring Audio during Recording About the Focus Assist FunctionIf the Record-Standby Mode Contin- ues Record-Standby or Stop modeFunction/Initial Setting Header REC FunctionPlayback Procedure SearchHeader REC Function Executing the Header REC FunctionConnecting the Video Signal CablesConnecting the IEEE1394 Cable Displaying AlarmsDubbing with AV Devices HDV/DV DubbingBackup Recording SettingsHDV/DV Dubbing Cont’d OFFRemote Control Unit Functions List Shutter Speed in 24p ModeConnect a Remote Con- trol Unit RM-LP55/RM- LP57 ConnectionMenu Screen Configura- tion Setting Menu Screens TOP Menu ScreenFunction/Setting bold characters indicate initial settings Setting DescriptionVideo FORMAT1/2 Menu Screen Frame RateInitial settings U model 7.5% E model 0.0% Video FORMAT2/2 Menu ScreenMenu Screen AutoMiddle HighNormal 108%Standard StopSwitch Mode Menu Screen Switch Mode menu screen is only displayed in camera modeREC Item Setting for Step Setting for Variable White Balance Menu ScreenMIX AUDIO/MIC1/2 Menu ScreenAUDIO/MIC2/2 Menu Screen LCD/VF2/4 menu screen can only be set in camera mode LCD/VF1/4 Menu ScreenLCD/VF2/4 Menu Screen 70-80%LCD/VF4/4 Menu Screen Screen is displayed in the VTR modeLCD/VF3/4 Menu Screen Disable TC/UB/CLOCK Menu ScreenHeader REC Menu Screen DropTIME/DATE Menu Screen OTHERS1/2 Menu ScreenOTHERS2/2 Menu Screen 1394Loading a menu settings file Saving settingsError displays File Manage Menu ScreenRotate How to Use Skin DetailInitializing formatting an SD mem- ory card Outputting Color Bars How to Use Skin Detail Cont’dUsing the Skin Detail Function Display Status Action Error Code Error Details This device Operation Remedy Blinking Pattern Remaining Battery/TapeSymptoms Remedy TroubleshootingHow to Display the Hour Meter HDV SpecificationsExternal Dimensions unit mm GY-HD251 Remarque Important SafeguardsSafety Precautions Port Cable Length HD251CHE See Provided only for U modelContents Precautions for Use of Head Cleaning Tape Precautions for Proper UseRoutine and Periodical Maintenance Battery Pack to be Used Characteristic CCD Phe- nomenaCondensation Videocassette to be UsedZoom Lens Front SectionIris A/R Input GND4TC GENE. Time code generator setting switch Setting, the time code always operatesAccording to the input level. When excessive Rear SectionBGAIN Sensitivity selector switch PresetRight Side Section EREC REC trigger button start/stop recordingLeft Side Section RCATop Section Recording Composite Recording and Image Out- put FormatsIeee Indications on the LCD Monitor and in the View- finder Indications on the LCD Monitor Viewfinder Cont’dFilter OFF ND1 ND2File Full Auto ON, OFF GainEXT NDFSafety Zone Safety Zone OFFCenter Mark OFF DV-24PAHow to Attach the View Basic System Attaching the Zoom LensFinder Attaching the Microphone ProvidedInserting an SD Memory Card SDHC-compliant memory cards cannot be used with this deviceBattery Operation AC Operation„GY-HD250U „GY-HD251ETurning the Power on Setting and Displaying Loading/Unloading the CassetteDate and Time VTRTime code input entered the IEEE1394 connector Displaying Time CodeDisplayed Time Code/User’s Bit Time codes are displayedPresetting and Recording of Time Code Continual time codes across different scenesTime code starts to run from the time it is Time code generator’s running method isPresetting the Time Code from the LCD Screen Playing Back Time CodeInternal Free REC Regen InternalBlinks when the time code cannot be synchronized Slave unit GY-HD250U/GY-HD251E/GY-HD110U/GY- HD111EExternal TC OUTAdjusted Adjust the position and angle of the viewfinder Screen Adjustment Viewfinder AdjustmentBack Focus Adjustment White Balance Adjustment White Shading AdjustmentSet the ND filter switch according to the current lighting When correct white balance is obtained, the approximateSetting the Video Format Camera SettingsScreen Size 43/169 Mode Selection ND FilterAudio Input Signal Selec- tion Basic Recording Opera- tion How to set the Header REC menu screen Header REC FunctionPlayback Procedure Outputting AudioFast-Forward, Rewind SearchConnecting the Video Signal CablesRecording Composite Video Signals from an External Device Status Screen Display on the LCD Screen or ViewfinderUsing Genlock Func- tions Synchronized SignalsAdjust SC and H Phase Dubbing with AV DevicesHDV/DV Dubbing Backup Recording Connect a Remote Con- trol Unit RM-LP55/RM- LP57Menu Screen Configura- tion Connect a Remote Control Unit RM-LP55/RM-LP57 Cont’dSetting Menu Screens Menu Screen Configuration Cont’dTOP Menu Screen Video FORMAT1/2 Menu ScreenOFF ExecuteVideo FORMAT2/2 Menu Screen Video FORMAT1/2 Menu Screen Cont’dMenu Screen 3200KMiddle HighStandard Normal108% Stop PresetWhite Balance Menu Screen Switch Mode Menu Screen AUDIO/MIC1/2 Menu ScreenStep NoneAUDIO/MIC2/2 Menu Screen LCD/VF1/4 Menu ScreenMIX BlueLCD/VF2/4 Menu Screen LCD/VF3/4 Menu ScreenVoltage SECLCD/VF4/4 Menu Screen TC/UB/CLOCK Menu ScreenColor InternalHeader REC Menu Screen TIME/DATE Menu ScreenOTHERS1/2 Menu Screen OTHERS2/2 Menu Screen3MIN BlinkGenlock Menu Screen OTHERS2/2 Menu Screen Cont’d100 101 File Manage Menu ScreenSkin color detection function, follow the steps below How to Use Skin DetailIf you want to change the range of colors recognized with 104 105 Outputting Color BarsNo DV Signal No HDV SignalSwitch Switch to VTRError Code Error Details GY-HD250/GY-HD251 Remedy Operation RGB? TroubleshootingHow to Display the Hour Meter Specifications AUX inputGenlock input HD/SD SDI outputCorrection
Top Page Image Contents