JVC GY-HD200E/CHE How to Use Skin Detail, Skin color detection function, follow the steps below

Page 111

MENU SCREENS

FEATURES OF THE CAMERA SECTION

FILE MANAGE Menu Screen (Cont’d)

Resetting the menu settings to the factory settings

Select the RESET FILE.. item on the FILE MANAGE menu screen.

1.Turn the SHUTTER dial, bring the cursor (K) to SELECT and press the SHUTTER dial.

•The file name setting area for the file to be reset flashes.

2.Turn the SHUTTER dial, select the name of the file to reset, and press the SHUTTER dial.

CAM1, CAM2, CAM3, CAM4, CURRENT (current set- tings)

3.Turn the SHUTTER dial, bring the cursor (K) to the RESET item and press the SHUTTER dial.

•EXECUTE flashes.

4.With EXECUTE selected, press the SHUTTER dial to reset the settings.

MEMO

Even if CAM1, CAM2, CAM3, or CAM4 are reset, the cur- rent settings are not reset.

To reset the currently set values, select “CURRENT”.

Initializing (formatting) an SD mem- ory card

Before initializing (formatting) a card:

1Insert and remove the SD memory card with the power to this device OFF.

2Disable write-protection on the SD memory card.

3Check that an SD memory card has been inserted into this device.

1.Turn the SHUTTER dial, bring the cursor (K) to the FOR- MAT SD CARD item and press the SHUTTER dial.

• CANCEL flashes.

2.Turn the SHUTTER dial, and when EXECUTE flashes, press the SHUTTER dial to initialize (format) the card.

Execute

Complete

 

Flashing

 

Error display

Error

 

How to Use Skin Detail

This function suppresses edge sharpening in the skin color areas of the video signal, enabling velvety, smooth skin tones.

Setting the skin detail function color and range

SHUTTER dial

USER 1

USER 2

USER 3

SHUTTER

ND FILTER

2

1

MENU

STATUS

STATUS button

1.Display the ADVANCED PROCESS menu screen. In menu setting procedure

TOP MENU screen ο CAMERA PROCESS[1/2] ο CAMERA PROCESS[2/2] ο Select ADVANCED PRO- CESS item.

Cursor

3.Move the cursor (K) to the SKIN COLOR DET. item, press the SHUTTER dial and select EXECUTE to switch to skin color detection mode.

4.Shoot so that the color area you want to detect within the detection area frame is input.

To confirm the detection area, press the SHUTTER dial and set SKIN COLOR DET. to STOP.

•The frame on the screen is the detection area for the skin detail function.

•The color within the detection area is recognized as the color that the skin detail function will use.

•If the color within the detection area is not recognized as the color that the skin detail function will use, “ERROR” is displayed on the screen.

Detection area

SKIN COLOR ADJUST menu screen

Black and white presenta- tion

Color presenta- tion

SKIN COLOR ADJUST screen

5. If you want to change the range of colors recognized with

the skin color detection function, follow the steps below.

If there is an error:

Check items 2 and 3 in “Before initializing (formatting) a card”.

Execute

Complete

If the current menu settings and the factory settings have different video format settings, “REBOOT!” is displayed for 3 seconds, this device turns off automatically and then turns on.

Reboot display

CAMERA PROCESS[2/2] menu screen

2.Turn the SHUTTER dial, bring the cursor (K) to the SKIN COLOR ADJUST item and press the SHUTTER dial.

•The SKIN COLOR ADJUST screen is displayed.

•The entire screen becomes black and white, and only the areas recognized by the skin detail function are displayed in color.

1Turn the SHUTTER dial, bring the cursor (K) to the

SKIN COLOR RANGE item and press the SHUTTER

dial.

ο The setting area flashes and can be changed.

2Turn the SHUTTER dial up or down to widen or narrow the color range.

• Set the range as you check the color display.

3To confirm the color range, press the SHUTTER dial.

•The setting returns to its lit state.

6.To stop the SKIN COLOR ADJUST function, turn the SHUTTER dial, bring the cursor (K) to the PAGE BACK item and press the SHUTTER dial.

When this happens, the SUB NAME initial value, “[SCENE]” is displayed.

ADVANCED PROCESS menu screen

102

103

Page 110 Page 112
Image 111
Page 110 Page 112
Contents For Customer Use GY-HD200U/CHU Instructions GY-HD200E/CHE GY-HD201E/CHEImportant Safeguards Safety PrecautionsRemarque European Union Safety Precautions Cont’dThis symbol is only valid in the European Union Information for Users on Disposal of Old EquipmentSD memory card See For DC ×2/EarphoneSee See pages 12, 36Contents Head Cleaning Precautions for Proper UseRoutine and Periodical Maintenance Precautions for Use of Head Cleaning TapeVideocassette to be Used Battery Pack to be UsedCharacteristic CCD Phe- nomena CondensationMemo Zoom LensFront Section Th16 × 5.5BRMULCD Door Rear SectionRight Side Section Left Side Section Top Section Recording and Image Out- put Formats Status Screens Status Screens in the Camera ModeSetting Status Contents of Indications Indications on the LCD Monitor and in the View- finderIndications on the LCD Monitor and in the Viewfinder Cont’d ContentsIndication Indication Contents NDF Magnified Status Indications on LCD MonitorSafety Zone Indication Camera mode only Alarm Message DisplaySwitching between the LCD Screen and Viewfinder Display Menu Setting ScreenHow to Attach the View- finder Basic System Attaching the Zoom LensAttaching the Microphone Provided Inserting an SD Memory Card Attaching the Tripod Base OptionalAC Operation Battery OperationTurning the Power on Setting and Displaying Loading/Unloading the CassetteDate and Time Setting Displaying Time CodeDisplaying the Time and Date on the Screen Presetting user’s bit data Presetting and Recording of Time CodeSetting Presetting time code dataPlaying Back Time Code Presetting User’s BitAborting Preset Operation About Time Code ModeViewfinder Adjustment Screen AdjustmentFull Auto White Balance FAW Back Focus AdjustmentWhite Balance Adjustment White Balance AdjustmentSetting the REC Item White Shading AdjustmentSetting the Video Format Setting the Frame Rate ItemCamera Settings Audio Input Signal Selec- tionScreen Size 43/169 Mode Selection About the Focus Assist Function Audio Input Signal Selection Cont’dBasic Recording Opera- tion Monitoring Audio during RecordingHeader REC Function If the Record-Standby Mode Contin- uesRecord-Standby or Stop mode Function/Initial SettingExecuting the Header REC Function Playback ProcedureSearch Header REC FunctionDisplaying Alarms Connecting the VideoSignal Cables Connecting the IEEE1394 CableHDV/DV Dubbing Dubbing with AV DevicesOFF Backup RecordingSettings HDV/DV Dubbing Cont’dConnection Remote Control Unit Functions ListShutter Speed in 24p Mode Connect a Remote Con- trol Unit RM-LP55/RM- LP57Menu Screen Configura- tion TOP Menu Screen Setting Menu ScreensFrame Rate Function/Setting bold characters indicate initial settingsSetting Description Video FORMAT1/2 Menu ScreenAuto Initial settings U model 7.5% E model 0.0%Video FORMAT2/2 Menu Screen Menu Screen108% MiddleHigh NormalStop StandardWhite Balance Menu Screen Switch Mode Menu ScreenSwitch Mode menu screen is only displayed in camera mode REC Item Setting for Step Setting for VariableAUDIO/MIC1/2 Menu Screen AUDIO/MIC2/2 Menu ScreenMIX 70-80% LCD/VF2/4 menu screen can only be set in camera modeLCD/VF1/4 Menu Screen LCD/VF2/4 Menu ScreenScreen is displayed in the VTR mode LCD/VF3/4 Menu ScreenLCD/VF4/4 Menu Screen Drop DisableTC/UB/CLOCK Menu Screen Header REC Menu ScreenOTHERS1/2 Menu Screen TIME/DATE Menu Screen1394 OTHERS2/2 Menu ScreenFile Manage Menu Screen Loading a menu settings fileSaving settings Error displaysHow to Use Skin Detail Initializing formatting an SD mem- ory cardRotate How to Use Skin Detail Cont’d Using the Skin Detail FunctionOutputting Color Bars Display Status Action Blinking Pattern Remaining Battery/Tape Error Code Error Details This device Operation RemedyTroubleshooting How to Display the Hour MeterSymptoms Remedy Specifications External Dimensions unit mmHDV GY-HD251 Important Safeguards Safety PrecautionsRemarque Port Cable Length See Provided only for U model HD251CHEContents Precautions for Proper Use Routine and Periodical MaintenancePrecautions for Use of Head Cleaning Tape Videocassette to be Used Battery Pack to be UsedCharacteristic CCD Phe- nomena CondensationGND Zoom LensFront Section Iris A/R InputRear Section 4TC GENE. Time code generator setting switchSetting, the time code always operates According to the input level. When excessiveEREC REC trigger button start/stop recording BGAIN Sensitivity selector switchPreset Right Side SectionRCA Left Side SectionTop Section Recording and Image Out- put Formats IeeeRecording Composite Indications on the LCD Monitor and in the View- finder Viewfinder Cont’d Indications on the LCD MonitorFull Auto ON, OFF Gain Filter OFF ND1ND2 FileNDF EXTDV-24PA Safety ZoneSafety Zone OFF Center Mark OFFAttaching the Microphone Provided How to Attach the ViewBasic System Attaching the Zoom Lens FinderSDHC-compliant memory cards cannot be used with this device Inserting an SD Memory Card„GY-HD251E Battery OperationAC Operation „GY-HD250UTurning the Power on VTR Setting and DisplayingLoading/Unloading the Cassette Date and TimeTime codes are displayed Time code input entered the IEEE1394 connectorDisplaying Time Code Displayed Time Code/User’s BitTime code generator’s running method is Presetting and Recording of Time CodeContinual time codes across different scenes Time code starts to run from the time it isFree REC Regen Internal Presetting the Time Code from the LCD ScreenPlaying Back Time Code InternalTC OUT Blinks when the time code cannot be synchronizedSlave unit GY-HD250U/GY-HD251E/GY-HD110U/GY- HD111E ExternalScreen Adjustment Viewfinder Adjustment Back Focus AdjustmentAdjusted Adjust the position and angle of the viewfinder When correct white balance is obtained, the approximate White Balance AdjustmentWhite Shading Adjustment Set the ND filter switch according to the current lightingND Filter Setting the Video FormatCamera Settings Screen Size 43/169 Mode SelectionAudio Input Signal Selec- tion Basic Recording Opera- tion Header REC Function How to set the Header REC menu screenSearch Playback ProcedureOutputting Audio Fast-Forward, RewindStatus Screen Display on the LCD Screen or Viewfinder Connecting the VideoSignal Cables Recording Composite Video Signals from an External DeviceDubbing with AV Devices Using Genlock Func- tionsSynchronized Signals Adjust SC and H PhaseHDV/DV Dubbing Connect a Remote Con- trol Unit RM-LP55/RM- LP57 Backup RecordingConnect a Remote Control Unit RM-LP55/RM-LP57 Cont’d Menu Screen Configura- tionMenu Screen Configuration Cont’d Setting Menu ScreensExecute TOP Menu ScreenVideo FORMAT1/2 Menu Screen OFFVideo FORMAT1/2 Menu Screen Cont’d Video FORMAT2/2 Menu ScreenHigh Menu Screen3200K MiddleNormal 108%Standard Preset White Balance Menu ScreenStop None Switch Mode Menu ScreenAUDIO/MIC1/2 Menu Screen StepBlue AUDIO/MIC2/2 Menu ScreenLCD/VF1/4 Menu Screen MIXSEC LCD/VF2/4 Menu ScreenLCD/VF3/4 Menu Screen VoltageInternal LCD/VF4/4 Menu ScreenTC/UB/CLOCK Menu Screen ColorTIME/DATE Menu Screen Header REC Menu ScreenBlink OTHERS1/2 Menu ScreenOTHERS2/2 Menu Screen 3MINOTHERS2/2 Menu Screen Cont’d Genlock Menu ScreenFile Manage Menu Screen 100 101How to Use Skin Detail If you want to change the range of colors recognized withSkin color detection function, follow the steps below Outputting Color Bars 104 105Switch to VTR No DV SignalNo HDV Signal SwitchError Code Error Details GY-HD250/GY-HD251 Remedy Operation Troubleshooting How to Display the Hour MeterRGB? HD/SD SDI output SpecificationsAUX input Genlock inputCorrection
Top Page Image Contents