JVC GY-HD201E/CHE, GY-HD200E/CHE, GY-HD200U/CHU manual Inserting an SD Memory Card

Page 77

PREPARATIONS

About the Viewfinder Cable

Attach the viewfinder cable to the clamp 7 on page 14.

Taking out the SD memory card

To reduce the emission of unwanted radio waves, be sure to

1. Push the SD memory card in the direction of the arrow.

attach the provided core filter as shown in the figure below.

• Attach the core filter (black) as close to this device as pos-

• The SD memory card comes out slightly.

sible, as shown in the figure.

2. Pull the SD memory card straight out.

 

Core filter (black)

Attaching the Tripod Base (Provided only for U model)

Use the provided tripod base to place the camera on a tri- pod. (U model only)

1.Attach the tripod base on the tripod by using the hole that balances this device most optimally.

1.Tripod mounting holes

2.While pushing the safety lever, pull the lock lever toward the front until the front mount clip clicks into place.

CAUTION

•The front base mount may be locked while the pin of the tripod base is not inserted into the hole on the rear base mount of this device. Therefore, after mounting, make sure that these parts are engaged properly.

•When moving this device mounted on a tripod, any impact or vibration should be avoided as this may cause this device to become detached and to drop from the tri- pod.

Be sure to remove this device from the tripod before transporting it.

About SD Memory Cards

Front mount clip

3. Pin

Inserting an SD Memory Card

By using an SD memory card, you can save and call up menu settings and camera settings for GY-HD250/GY-HD251.

X See “FILE MANAGE Menu Screen” on page 100.

Check that the POWER switch is OFF.

Inserting an SD Memory Card

1.Open the SD memory card cover.

2.Face the cutout end of the SD memory card inward and insert it in the direction of the arrow.

CAUTION

Be sure not to touch the metal connector area of the SD memory card.

3.Close the SD memory card cover.

•When you use an SD memory card that was either just purchased or formatted on a device other than GY-HD250/ GY-HD251, format it on GY-HD250/GY-HD251.

X See page 102. Recommended SD memory cards Panasonic: 16 MB to 2 GB

•You can write-protect the card so that saved files are not mistakenly erased. Set the switch on the side of the SD memory card to the “LOCK” position.

LOCK switch

MEMO

SDHC-compliant memory cards cannot be used with this device.

2. Safety lever

2.

Lock lever

3.Place this device on the tripod base by aligning the rear base mount of this device with the pin on the tripod base.

4. Front base mount

3. Rear base mount

4.Hold the camera on the top and slide forward so that the base mount of the camera is locked by the front mount clip of this device as it clicks into place.

4.

Cutout

SD memory card cover

34

35

Page 76 Page 78
Image 77
Page 76 Page 78
Contents For Customer Use GY-HD200U/CHU Instructions GY-HD200E/CHE GY-HD201E/CHERemarque Important SafeguardsSafety Precautions This symbol is only valid in the European Union Safety Precautions Cont’dInformation for Users on Disposal of Old Equipment European UnionSee For DC ×2/EarphoneSee pages 12, 36 SD memory card SeeContents Routine and Periodical Maintenance Precautions for Proper UsePrecautions for Use of Head Cleaning Tape Head CleaningCharacteristic CCD Phe- nomena Battery Pack to be UsedCondensation Videocassette to be UsedFront Section Zoom LensTh16 × 5.5BRMU MemoLCD Door Rear SectionRight Side Section Left Side Section Top Section Recording and Image Out- put Formats Setting Status Contents of Indications Status Screens in the Camera ModeIndications on the LCD Monitor and in the View- finder Status ScreensIndications on the LCD Monitor and in the Viewfinder Cont’d ContentsIndication Indication Contents NDF Magnified Status Indications on LCD MonitorSwitching between the LCD Screen and Viewfinder Display Alarm Message DisplayMenu Setting Screen Safety Zone Indication Camera mode onlyAttaching the Microphone Provided How to Attach the View- finderBasic System Attaching the Zoom Lens Inserting an SD Memory Card Attaching the Tripod Base OptionalAC Operation Battery OperationTurning the Power on Date and Time Setting and DisplayingLoading/Unloading the Cassette Displaying the Time and Date on the Screen SettingDisplaying Time Code Setting Presetting and Recording of Time CodePresetting time code data Presetting user’s bit dataAborting Preset Operation Presetting User’s BitAbout Time Code Mode Playing Back Time CodeViewfinder Adjustment Screen AdjustmentWhite Balance Adjustment Back Focus AdjustmentWhite Balance Adjustment Full Auto White Balance FAWSetting the Video Format White Shading AdjustmentSetting the Frame Rate Item Setting the REC ItemScreen Size 43/169 Mode Selection Camera SettingsAudio Input Signal Selec- tion Basic Recording Opera- tion Audio Input Signal Selection Cont’dMonitoring Audio during Recording About the Focus Assist FunctionRecord-Standby or Stop mode If the Record-Standby Mode Contin- uesFunction/Initial Setting Header REC FunctionSearch Playback ProcedureHeader REC Function Executing the Header REC FunctionSignal Cables Connecting the VideoConnecting the IEEE1394 Cable Displaying AlarmsHDV/DV Dubbing Dubbing with AV DevicesSettings Backup RecordingHDV/DV Dubbing Cont’d OFFShutter Speed in 24p Mode Remote Control Unit Functions ListConnect a Remote Con- trol Unit RM-LP55/RM- LP57 ConnectionMenu Screen Configura- tion TOP Menu Screen Setting Menu ScreensSetting Description Function/Setting bold characters indicate initial settingsVideo FORMAT1/2 Menu Screen Frame RateVideo FORMAT2/2 Menu Screen Initial settings U model 7.5% E model 0.0%Menu Screen AutoHigh MiddleNormal 108%Stop StandardSwitch Mode menu screen is only displayed in camera mode Switch Mode Menu ScreenREC Item Setting for Step Setting for Variable White Balance Menu ScreenMIX AUDIO/MIC1/2 Menu ScreenAUDIO/MIC2/2 Menu Screen LCD/VF1/4 Menu Screen LCD/VF2/4 menu screen can only be set in camera modeLCD/VF2/4 Menu Screen 70-80%LCD/VF4/4 Menu Screen Screen is displayed in the VTR modeLCD/VF3/4 Menu Screen TC/UB/CLOCK Menu Screen DisableHeader REC Menu Screen DropOTHERS1/2 Menu Screen TIME/DATE Menu Screen1394 OTHERS2/2 Menu ScreenSaving settings Loading a menu settings fileError displays File Manage Menu ScreenRotate How to Use Skin DetailInitializing formatting an SD mem- ory card Outputting Color Bars How to Use Skin Detail Cont’dUsing the Skin Detail Function Display Status Action Blinking Pattern Remaining Battery/Tape Error Code Error Details This device Operation RemedySymptoms Remedy TroubleshootingHow to Display the Hour Meter HDV SpecificationsExternal Dimensions unit mm GY-HD251 Remarque Important SafeguardsSafety Precautions Port Cable Length See Provided only for U model HD251CHEContents Precautions for Use of Head Cleaning Tape Precautions for Proper UseRoutine and Periodical Maintenance Characteristic CCD Phe- nomena Battery Pack to be UsedCondensation Videocassette to be UsedFront Section Zoom LensIris A/R Input GNDSetting, the time code always operates 4TC GENE. Time code generator setting switchAccording to the input level. When excessive Rear SectionPreset BGAIN Sensitivity selector switchRight Side Section EREC REC trigger button start/stop recordingRCA Left Side SectionTop Section Recording Composite Recording and Image Out- put FormatsIeee Indications on the LCD Monitor and in the View- finder Viewfinder Cont’d Indications on the LCD MonitorND2 Filter OFF ND1File Full Auto ON, OFF GainNDF EXTSafety Zone OFF Safety ZoneCenter Mark OFF DV-24PABasic System Attaching the Zoom Lens How to Attach the ViewFinder Attaching the Microphone ProvidedSDHC-compliant memory cards cannot be used with this device Inserting an SD Memory CardAC Operation Battery Operation„GY-HD250U „GY-HD251ETurning the Power on Loading/Unloading the Cassette Setting and DisplayingDate and Time VTRDisplaying Time Code Time code input entered the IEEE1394 connectorDisplayed Time Code/User’s Bit Time codes are displayedContinual time codes across different scenes Presetting and Recording of Time CodeTime code starts to run from the time it is Time code generator’s running method isPlaying Back Time Code Presetting the Time Code from the LCD ScreenInternal Free REC Regen InternalSlave unit GY-HD250U/GY-HD251E/GY-HD110U/GY- HD111E Blinks when the time code cannot be synchronizedExternal TC OUTAdjusted Adjust the position and angle of the viewfinder Screen Adjustment Viewfinder AdjustmentBack Focus Adjustment White Shading Adjustment White Balance AdjustmentSet the ND filter switch according to the current lighting When correct white balance is obtained, the approximateCamera Settings Setting the Video FormatScreen Size 43/169 Mode Selection ND FilterAudio Input Signal Selec- tion Basic Recording Opera- tion Header REC Function How to set the Header REC menu screenOutputting Audio Playback ProcedureFast-Forward, Rewind SearchSignal Cables Connecting the VideoRecording Composite Video Signals from an External Device Status Screen Display on the LCD Screen or ViewfinderSynchronized Signals Using Genlock Func- tionsAdjust SC and H Phase Dubbing with AV DevicesHDV/DV Dubbing Connect a Remote Con- trol Unit RM-LP55/RM- LP57 Backup RecordingConnect a Remote Control Unit RM-LP55/RM-LP57 Cont’d Menu Screen Configura- tionMenu Screen Configuration Cont’d Setting Menu ScreensVideo FORMAT1/2 Menu Screen TOP Menu ScreenOFF ExecuteVideo FORMAT1/2 Menu Screen Cont’d Video FORMAT2/2 Menu Screen3200K Menu ScreenMiddle HighStandard Normal108% Stop PresetWhite Balance Menu Screen AUDIO/MIC1/2 Menu Screen Switch Mode Menu ScreenStep NoneLCD/VF1/4 Menu Screen AUDIO/MIC2/2 Menu ScreenMIX BlueLCD/VF3/4 Menu Screen LCD/VF2/4 Menu ScreenVoltage SECTC/UB/CLOCK Menu Screen LCD/VF4/4 Menu ScreenColor InternalTIME/DATE Menu Screen Header REC Menu ScreenOTHERS2/2 Menu Screen OTHERS1/2 Menu Screen3MIN BlinkOTHERS2/2 Menu Screen Cont’d Genlock Menu ScreenFile Manage Menu Screen 100 101Skin color detection function, follow the steps below How to Use Skin DetailIf you want to change the range of colors recognized with Outputting Color Bars 104 105No HDV Signal No DV SignalSwitch Switch to VTRError Code Error Details GY-HD250/GY-HD251 Remedy Operation RGB? TroubleshootingHow to Display the Hour Meter AUX input SpecificationsGenlock input HD/SD SDI outputCorrection
Top Page Image Contents