JVC GY-HD200E/CHE, GY-HD200U/CHU manual Header REC Function, How to set the Header REC menu screen

Page 90

SHOOTING OPERATION

HEADER REC Function

When the REC/VTR trigger button is pressed while the STOP button is pressed, this function first records the color bar video and the test tone (1 kHz sine-wave) of the built-in signal generator at the beginning of the tape. Then it records the black video signal and the mute audio signal for the duration specified in advance. When the recording is completed, this device enters the Record- Standby mode. The time code value at the Record-Standby position becomes the time code specified in advance. (HEADER REC function)

•Settings related to the HEADER REC function, such as whether the HEADER REC function should be enabled, the HEADER REC execution duration, and the time code value setting when the HEADER REC recording is completed, etc., are made on the HEADER REC menu screen.

•The HEADER REC function is enabled when TCG SOURCE on the TC/UB/CLOCK menu screen is set to INTERNAL.

•The HEADER REC function is executed under the following circumstances: CAM/VTR button: Set to CAM mode.

In the Record-Standby or Stop mode

Tape beginning

HEADER REC

Record-Standby mode

 

 

 

Normal recording

(Example) 30 sec

(Example) 30 sec

 

 

Color bar video signal

Black video signal

 

 

 

 

 

 

 

Test tone (1 kHz)

Mute audio (No sound)

 

 

 

 

 

 

 

(Setting range: 0 to 99 sec)

(Setting range: 0 to 99 sec)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Time code, user’s bits recording

 

Time code, user’s bits recording

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Time code:

User’s bits:

 

Time code:

User’s bits:

The value specified on the HEADER

The value specified for the UB

 

The value specified on the HEADER

The value specified for the UB

REC menu screen- HEADER REC time.

DATA item on the HEADER REC

 

REC menu screen.

PRESET item on the TC/UB/

(Example) 23:59:00:00

menu screen.

 

(Example) 00:00:00:00

CLOCK menu screen.

 

 

 

 

 

 

 

 

(only when set to REC RUN or

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FREE RUN mode)

 

 

 

 

 

 

 

 

 

 

 

„HEADER REC menu screen contents

Item

 

 

Function/Initial Setting

 

START KEY

Sets whether the HEADER REC operation should be executed when the REC/VTR trigger button is pressed while the

 

 

 

STOP button is pressed.

 

 

 

DISABLE

: HEADER REC operation is not executed.

 

 

 

STOP+REC

: HEADER REC operation is executed.

 

TC DATA

Sets the time code value for the point when the Record-Standby mode is engaged following completion of HEADER

 

 

 

REC.

 

 

 

 

EXECUTE

: Confirms the set time code.

 

 

 

ZERO PRESET: Resets all time codes to zero “0”.

 

 

 

CANCEL

: Clears the set time code.

 

 

 

The frame mode is set depending on the setting in the DROP FRAME item on the TC/UB/CLOCK menu screen.

 

 

 

* The time code value at the point when the Record-Standby mode is engaged may differ some frames from the value

 

 

 

set for this item.

 

UB DATA

 

Sets the user’s bits of the HEADER REC section.

 

 

 

EXECUTE

: Confirms the set user’s bits.

 

 

 

ZERO PRESET: Resets all user’s bits data to zero “0”.

 

 

 

CANCEL

: Clears the set user’s bits.

 

 

 

MEMO

 

 

 

 

The user’s bits for the normal recording section are set on the TC/UB/CLOCK menu screen.

 

 

 

 

 

 

 

 

BARS TIME

Sets the duration (seconds) in which the color bar signal and test tone (1 kHz) is recorded during HEADER REC. (1-sec

 

 

 

steps)

 

 

 

 

[Initial Setting: 0SEC - 30SEC - 99SEC]

 

BLACK TIME

Sets the duration (seconds) in which the black signal is recorded during HEADER REC. (1-sec steps)

 

 

 

[Initial Setting: 0SEC - 30SEC - 99SEC]

 

PAGE BACK

The TC/UB/CLOCK menu screen returns when the SHUTTER dial is pressed.

 

How to set the HEADER REC menu screen

1.Display the HEADER REC menu screen.

1Select the TC/UB/CLOCK.. item on the TOP MENU screen.

2Select the HEADER REC item on the TC/UB/CLOCK menu screen.

TC/UB/CLOCK menu screen

HEADER REC menu screen

2.Setting the HEADER REC menu screen.

1Select the menu item.

Rotate the SHUTTER dial to align the cursor (K) with the item to be set, and then press the SHUTTER dial.

•The setting area of the selected item starts blinking.

2Changing the setting value.

Rotate the SHUTTER dial to change the setting, and then press the SHUTTER dial.

Cursor

Item

Set value

„In the case of the TC DATA item and the UB DATA item, the blinking digit position moves when the SHUT- TER dial is pressed. When the SHUTTER dial is rotated, the value of the blinking digit changes. After all the digits have been set and the SHUTTER dial is pressed, EXECUTE starts blinking. Press the SHUT- TER dial once more to confirm the set value.

3.To terminate the setting, press the STATUS button.

Executing the HEADER REC Function

The START KEY item on the HEADER REC menu screen should be set to STOP+REC.

1.Load the cassette and engage the Record-Standby mode or the Stop mode.

2.While pressing the STOP button, press the REC/VTR trigger button.

•The tape automatically rewinds to the beginning, and HEADER REC operation starts from the beginning of the tape.

After HEADER REC recording is performed for the

specified duration only, the Record-Standby mode is engaged automatically.

•During HEADER REC recording, “HEADER REC” is shown (blinking) on the LCD monitor and in the view- finder.

During HEADER REC

•The menu screen is not displayed during HEADER REC recording.

3.After HEADER REC recording is completed and the Record-Standby mode is engaged, normal recording starts when you press the REC/VTR trigger button.

•When the TC GENE. switch is set to either REC or REGEN, the time code value at the start of the HEADER REC menu screen.

MEMO

•To stop during HEADER REC operation, press the REC/ VTR trigger button or the STOP button.

•The HEADER REC menu screen cannot be opened dur- ing HEADER REC recording.

•HEADER REC operation is accepted even during load- ing of the cassette tape.

•The test tone (1 kHz sine-wave) recorded in the color bar section will be recorded unrelated to the setting for the TEST TONE item on the AUDIO/MIC[1/2] menu screen.

•The time code preset on the TC/UB/CLOCK menu screen becomes invalid when HEADER REC recording is performed.

•The user’s bits following completion of HEADER REC recording will be the user’s bits value set on the TC/UB/ CLOCK menu screen.

•The running of the time code following completion of

HEADER REC recording will be in accordance with the setting of the TC GENE. switch.

FREE RUN : Continuous running.

REC RUN or REGEN: Runs only during REC.

•Camera images are not output to the LCD monitor, view- finder or video output during REW mode when the HEADER REC operation begins.

60

61

Page 89 Page 91
Image 90
Page 89 Page 91
Contents GY-HD200U/CHU Instructions GY-HD200E/CHE GY-HD201E/CHE For Customer UseImportant Safeguards Safety PrecautionsRemarque Information for Users on Disposal of Old Equipment Safety Precautions Cont’dThis symbol is only valid in the European Union European UnionSee pages 12, 36 For DC ×2/EarphoneSee SD memory card SeeContents Precautions for Use of Head Cleaning Tape Precautions for Proper UseRoutine and Periodical Maintenance Head CleaningCondensation Battery Pack to be UsedCharacteristic CCD Phe- nomena Videocassette to be UsedTh16 × 5.5BRMU Zoom LensFront Section MemoRear Section LCD DoorRight Side Section Left Side Section Top Section Recording and Image Out- put Formats Indications on the LCD Monitor and in the View- finder Status Screens in the Camera ModeSetting Status Contents of Indications Status ScreensContents Indications on the LCD Monitor and in the Viewfinder Cont’dIndication Indication Contents Magnified Status Indications on LCD Monitor NDFMenu Setting Screen Alarm Message DisplaySwitching between the LCD Screen and Viewfinder Display Safety Zone Indication Camera mode onlyHow to Attach the View- finder Basic System Attaching the Zoom LensAttaching the Microphone Provided Attaching the Tripod Base Optional Inserting an SD Memory CardBattery Operation AC OperationTurning the Power on Setting and Displaying Loading/Unloading the CassetteDate and Time Setting Displaying Time CodeDisplaying the Time and Date on the Screen Presetting time code data Presetting and Recording of Time CodeSetting Presetting user’s bit dataAbout Time Code Mode Presetting User’s BitAborting Preset Operation Playing Back Time CodeScreen Adjustment Viewfinder AdjustmentWhite Balance Adjustment Back Focus AdjustmentWhite Balance Adjustment Full Auto White Balance FAWSetting the Frame Rate Item White Shading AdjustmentSetting the Video Format Setting the REC ItemCamera Settings Audio Input Signal Selec- tionScreen Size 43/169 Mode Selection Monitoring Audio during Recording Audio Input Signal Selection Cont’dBasic Recording Opera- tion About the Focus Assist FunctionFunction/Initial Setting If the Record-Standby Mode Contin- uesRecord-Standby or Stop mode Header REC FunctionHeader REC Function Playback ProcedureSearch Executing the Header REC FunctionConnecting the IEEE1394 Cable Connecting the VideoSignal Cables Displaying AlarmsDubbing with AV Devices HDV/DV DubbingHDV/DV Dubbing Cont’d Backup RecordingSettings OFFConnect a Remote Con- trol Unit RM-LP55/RM- LP57 Remote Control Unit Functions ListShutter Speed in 24p Mode ConnectionMenu Screen Configura- tion Setting Menu Screens TOP Menu ScreenVideo FORMAT1/2 Menu Screen Function/Setting bold characters indicate initial settingsSetting Description Frame RateMenu Screen Initial settings U model 7.5% E model 0.0%Video FORMAT2/2 Menu Screen AutoNormal MiddleHigh 108%Standard StopREC Item Setting for Step Setting for Variable Switch Mode Menu ScreenSwitch Mode menu screen is only displayed in camera mode White Balance Menu ScreenAUDIO/MIC1/2 Menu Screen AUDIO/MIC2/2 Menu ScreenMIX LCD/VF2/4 Menu Screen LCD/VF2/4 menu screen can only be set in camera modeLCD/VF1/4 Menu Screen 70-80%Screen is displayed in the VTR mode LCD/VF3/4 Menu ScreenLCD/VF4/4 Menu Screen Header REC Menu Screen DisableTC/UB/CLOCK Menu Screen DropTIME/DATE Menu Screen OTHERS1/2 Menu ScreenOTHERS2/2 Menu Screen 1394Error displays Loading a menu settings fileSaving settings File Manage Menu ScreenHow to Use Skin Detail Initializing formatting an SD mem- ory cardRotate How to Use Skin Detail Cont’d Using the Skin Detail FunctionOutputting Color Bars Display Status Action Error Code Error Details This device Operation Remedy Blinking Pattern Remaining Battery/TapeTroubleshooting How to Display the Hour MeterSymptoms Remedy Specifications External Dimensions unit mmHDV GY-HD251 Important Safeguards Safety PrecautionsRemarque Port Cable Length HD251CHE See Provided only for U modelContents Precautions for Proper Use Routine and Periodical MaintenancePrecautions for Use of Head Cleaning Tape Condensation Battery Pack to be UsedCharacteristic CCD Phe- nomena Videocassette to be UsedIris A/R Input Zoom LensFront Section GNDAccording to the input level. When excessive 4TC GENE. Time code generator setting switchSetting, the time code always operates Rear SectionRight Side Section BGAIN Sensitivity selector switchPreset EREC REC trigger button start/stop recordingLeft Side Section RCATop Section Recording and Image Out- put Formats IeeeRecording Composite Indications on the LCD Monitor and in the View- finder Indications on the LCD Monitor Viewfinder Cont’dFile Filter OFF ND1ND2 Full Auto ON, OFF GainEXT NDFCenter Mark OFF Safety ZoneSafety Zone OFF DV-24PAFinder How to Attach the ViewBasic System Attaching the Zoom Lens Attaching the Microphone ProvidedInserting an SD Memory Card SDHC-compliant memory cards cannot be used with this device„GY-HD250U Battery OperationAC Operation „GY-HD251ETurning the Power on Date and Time Setting and DisplayingLoading/Unloading the Cassette VTRDisplayed Time Code/User’s Bit Time code input entered the IEEE1394 connectorDisplaying Time Code Time codes are displayedTime code starts to run from the time it is Presetting and Recording of Time CodeContinual time codes across different scenes Time code generator’s running method isInternal Presetting the Time Code from the LCD ScreenPlaying Back Time Code Free REC Regen InternalExternal Blinks when the time code cannot be synchronizedSlave unit GY-HD250U/GY-HD251E/GY-HD110U/GY- HD111E TC OUTScreen Adjustment Viewfinder Adjustment Back Focus AdjustmentAdjusted Adjust the position and angle of the viewfinder Set the ND filter switch according to the current lighting White Balance AdjustmentWhite Shading Adjustment When correct white balance is obtained, the approximateScreen Size 43/169 Mode Selection Setting the Video FormatCamera Settings ND FilterAudio Input Signal Selec- tion Basic Recording Opera- tion How to set the Header REC menu screen Header REC FunctionFast-Forward, Rewind Playback ProcedureOutputting Audio SearchRecording Composite Video Signals from an External Device Connecting the VideoSignal Cables Status Screen Display on the LCD Screen or ViewfinderAdjust SC and H Phase Using Genlock Func- tionsSynchronized Signals Dubbing with AV DevicesHDV/DV Dubbing Backup Recording Connect a Remote Con- trol Unit RM-LP55/RM- LP57Menu Screen Configura- tion Connect a Remote Control Unit RM-LP55/RM-LP57 Cont’dSetting Menu Screens Menu Screen Configuration Cont’dOFF TOP Menu ScreenVideo FORMAT1/2 Menu Screen ExecuteVideo FORMAT2/2 Menu Screen Video FORMAT1/2 Menu Screen Cont’dMiddle Menu Screen3200K HighNormal 108%Standard Preset White Balance Menu ScreenStop Step Switch Mode Menu ScreenAUDIO/MIC1/2 Menu Screen NoneMIX AUDIO/MIC2/2 Menu ScreenLCD/VF1/4 Menu Screen BlueVoltage LCD/VF2/4 Menu ScreenLCD/VF3/4 Menu Screen SECColor LCD/VF4/4 Menu ScreenTC/UB/CLOCK Menu Screen InternalHeader REC Menu Screen TIME/DATE Menu Screen3MIN OTHERS1/2 Menu ScreenOTHERS2/2 Menu Screen BlinkGenlock Menu Screen OTHERS2/2 Menu Screen Cont’d100 101 File Manage Menu ScreenHow to Use Skin Detail If you want to change the range of colors recognized withSkin color detection function, follow the steps below 104 105 Outputting Color BarsSwitch No DV SignalNo HDV Signal Switch to VTRError Code Error Details GY-HD250/GY-HD251 Remedy Operation Troubleshooting How to Display the Hour MeterRGB? Genlock input SpecificationsAUX input HD/SD SDI outputCorrection
Top Page Image Contents