Panasonic AW-HE870N operating instructions Dos

Page 11

Precautions for use

DOS

Refer any servicing to qualified service personnel.

Handle the camera with care.

Protect the precision made lens by placing the lens cap over when the camera is not in use. If the lens is not installed, protect the surface of the prism by placing the body cap into the lens mount hole.

Use a mild blower or lens cleaning tissue designed for coated lenses, to clean the surface of the lens or prism in the event that it should become dirty.

Use a dry cloth to clean the camera if it is dirty. In case the dirt is hard to remove, use mild detergent and wipe gently.

Use caution when operating the camera in the vicinity of spot lights or bright lights, as well as light reflecting objects and surfaces.

Take immediate action if ever the camera should become wet. Turn the power off and have the unit checked by an authorized service facility.

Follow normal safety precautions to avoid personal injury.

Use the camera in an environment where the temperature is within 14 °F to 113 °F (–10 °C to +45 °C), and the relative humidity is within 20 % to 90 %.

Always turn the power off when the camera is not going to be used. Operate the camera only when there is adequate ventilation.

- 11 -

Image 11
Contents Operating Instructions Installation instructions providedRisk of Electric Shock Do not Open FCC NotePage Important Safety Instructions Contents Changing the settings Menu item setting/changingMenu item setting/changing User Mode Mounting spacer Standard accessoriesPreface Operating Instructions DC cable 9.84 ft m Down converter a standard feature FeaturesSpecial notes on operation DON’TS Precautions for useDOS Concerning electromagnetic interference Precautions for installationConcerning the installation location of the camera Tightening the mounting screws and mounting spacer Concerning the mounting screws and drop-prevention wire Drop-prevention wire Parts to be provided by the customer for installation Mounting screws M4 For attaching the drop-prevention wire Rear view Bottom view  Major operating controls and their functionsFront view / Top view / Rear view / Bottom view Front view Top view Lens fixing ring knob  Menu switch Menu ENTER/AWB switch ENTER/AWB  Lens mount DOWN/BAR switch DOWN/BAR  UP/ABB switch UP/ABB Video output connector Video OUT  Iris connector Iris Optional card slot Option Card  DC 12 V input connector 12 V G/L input connector G/L  Cable clampLens mounting When the pan-tilt head has been usedMounting Depth 3/8˝ 10 mm Wall  Example where the camera is mounted on a ceiling or wallCeiling Camera mounting bracket Mounting spacer supplied  Example of mounting on a surface above CameraIndoor Pan/tilt Head AW-PH400 Video OUT System configuration ConnectionsConnection of a remote operation panel When an SDI card AW-HHD870 has been installedInput Output Connection of the Indoor Pan-tilt Head AW-PH360  AW-IF400 Switch settings when the AW-RP400 is used HD/SD-SDI Connection of the Indoor Pan-tilt Head AW-PH400 SW1 SW2 SET UP 10BASE-T Connection of the Indoor Pan-tilt Head AW-PH405  AW-IF400 Switch settings when the AW-RP400 is used HD/SD HD/SD-SDI Connection of the Outdoor Pan-tilt Head AW-PH650  AW-IF400 Switch settings when the AW-RP400 is used HD/SD Control exercised from the Remote Operation Panel AW-CB400 How to operate the systemHow to operate the system Procedure for camera menu operation AW-CB400 Jog dial main How to operate the system Procedure for camera menu operation AW-RP655 How to operate the system Mode How to operate the system Procedure for camera menu operation AW-RP555 Use Mode Setting Use mode settingSelecting Take the shots Operating procedureAdjust the black balance Iris gain control in a lens AdjustmentFlange back adjustment For zoom lens Automatic iris power zoom lens Automatic white balance control AWB AWB A/AWB B White balance adjustment Preset of 3200K or 5600K white balance  Automatic tracking white balance setting ATW Manual white balance setting Black balance adjustment Total pedestal level adjustment When adjusting the phase of HD signals Genlock adjustment Horizontal phase control Adjustment by camera menu When adjusting the phase of SD signals Color phase adjustment  Setting when using the camera by itself Menu item setting/changingMenu item setting  Main menu screen Main menu of Halogen, Fluorescent, Outdoor ModeMain menu of User Mode Sub menu Halogen, Fluorescent, Outdoor Mode  Detecting ratio adjustment Light PEAK/AVG P50 to A50 Description of the setting screenDB to -1 dB  Gain setting Gain Auto, -6 dB to 18 dB AGC maximum gain setting AGC Max Gain 6 dB, 12 dB, 18 dB  Black level setting Pedestal -150 to +150 Skin color adjustment Flesh Tone -3 to +3  Color Set  Chroma level adjustment Chroma Level -3 to +3 Detail level setting Level Off, Low, High  Clean DNR setting Clean DNR Off, Low, High SD 480i 2D LPF SD 2D LPF Off, Low, High  Subcarrier phase fine adjustment SC Fine -127 to +127 Video output format setting Format 480i, 720p Horizontal phase can be adjusted when a genlock signalIris Control NG  Component output setting Component RGB, Y/Pb/Pr, Y/CPage  HD Detail Set Display Menu item setting/changing User ModeSub menu User Mode  Brightness Set Display Color Correction Set Display  SD Detail Set Display Color Matrix Set Display  Other Set Display  G/L Set Display Detecting ratio adjustment Light PEAK/AVG P50 to A50  Black level setting Pedestal -150 to +150  Gain setting Gain Auto, -6 dB to 18 dB AGC maximum gain setting AGC Max Gain 6 dB, 12 dB, 18 dB Pedestal, B Pedestal  Color Set  Chroma level adjustment Chroma Level -3 to +3 Level dependent level setting Level Dependent 0 % to 25 %  Detail band setting Detail Band 1 to Noise suppress level setting Noise Suppress 1 to  Clean DNR setting Clean DNR Off, Low, High  Dark detail level setting Dark Detail 0 to Chroma detail level setting Chroma Detail 0 to  Level dependent level setting Level Dependent 0 % to 25 %  Detail band setting Detail Band 1 to Noise suppress level setting Noise Suppress 1 to  Clean DNR setting Clean DNR Off, Low, High  Dark detail level setting Dark Detail 0 to Chroma detail level setting Chroma Detail 0 to Linear Matrix B-R MatrixB-R -31 to +31 Linear Matrix R-B MatrixR-B -31 to +31Linear Matrix G-R MatrixG-R -31 to +31 Linear Matrix G-B MatrixG-B -31 to +31Color Correction Set  Knee level setting Knee Point 88 % to 98 %, Dynamic  G/L Set  Horizontal phase adjustment H Phase -206 to +49 Subcarrier phase fine adjustment SC Fine -127 to +127  Other Set  Gamma level setting Gamma 0.35 to Video output format setting Format 480i, 720p  Flare correction level setting Flare R/G/B 0 to Black stretch setting Black Stretch Off, On  EBU matrix setting EBU Matrix Set Off, On Component output setting Component RGB, Y/Pb/Pr, Y/C Menu item setting/changing User Mode Changing the format settings Changing the settingsChanging the component setting Setting the EBU matrix Setting to initial set Setting to initial set Factory presets Halogen, Fluorescent, Outdoor Mode Initial settings of the setting items Factory preset valuesUser EBU Matrix Set Cannot operate TroubleshootingNo power Using the controller Check that the unit and lens have been connected properly LensCannot display MenusThey are disturbed SettingsCamera’s images Are not displayed orPictures are too Something is wrongWith the coloring PicturesDisplayed Controller’s Indicators flashFan Error is Multiple color bands Color bars areUnit inch mm AppearanceSpecifications White balance Video output format settingInput/Output connectors IndicatorAmbient operating humidity Allowable temperature rangesDimensions W  H  D WeightMemo Memo Eastern Zone