Panasonic AW-HE870N operating instructions Connection of the Outdoor Pan-tilt Head AW-PH650

Page 36

System configuration (Connections)

Connection of the Outdoor Pan-tilt Head AW-PH650

Turn off the power of all the equipment before proceeding with the connections.

Connect the AC adapter provided with the AW-PH650 to the AW-PH650 outdoor pan-tilt head.

Use 10BASE-T straight cables to connect the RP connectors on the pan-tilt heads with the CONTROL OUT TO PAN/TILT HEAD (1 to 5) connectors on the AW-RP655 multi-function controller and AW-RP555 multi hybrid control panel.

The maximum extension distance is 3281 ft. (1000 m) when using UTP category 5 cables or their equivalent.

Connect the CONTROL OUT TO PAN/TILT HEAD terminals (P1 to P5) of the AW-RP400 and the CONTROLLER terminal of the protocol converter AW-IF400 using a 10BASE-T straight cable when using the AW-RP400 pan/tilt control panel.

The maximum extension distance is 1640 ft. (500 m) when using UTP category 5 cables or their equivalent.

Connect the PAN/TILT HEAD terminal of the protocol converter AW-IF400 and the RP terminal of the AW-PH650 with a 10BASE-T straight cable.

The maximum extension distance is 3281 ft. (1000 m) when using UTP category 5 cables or their equivalent.

Use the camera cable provided with the pan-tilt head to connect the AW-PH650 to the unit.

Connect the iris control cable of the motorized zoom lens to the IRIS connector on the camera, and connect the zoom/focus cable to the LENS I/F (1) connector on the pan-tilt head.

- 36 -

Image 36

Contents Installation instructions provided Operating InstructionsFCC Note Risk of Electric Shock Do not OpenPage Important Safety Instructions Contents Menu item setting/changing Menu item setting/changing User ModeChanging the settings Standard accessories PrefaceOperating Instructions DC cable 9.84 ft m Mounting spacerFeatures  Down converter a standard featureSpecial notes on operation Precautions for use DON’TSDOS Precautions for installation Concerning the installation location of the cameraConcerning electromagnetic interference Concerning the mounting screws and drop-prevention wire Tightening the mounting screws and mounting spacerParts to be provided by the customer for installation  Mounting screws M4 For attaching the drop-prevention wire Drop-prevention wire Major operating controls and their functions Front view / Top view / Rear view / Bottom viewFront view Top view Rear view Bottom view  Menu switch Menu  ENTER/AWB switch ENTER/AWB Lens mount  Lens fixing ring knob UP/ABB switch UP/ABB  Video output connector Video OUT Iris connector Iris  DOWN/BAR switch DOWN/BAR DC 12 V input connector 12 V  G/L input connector G/L Cable clamp  Optional card slot Option CardWhen the pan-tilt head has been used MountingLens mounting Depth 3/8˝ 10 mm  Example where the camera is mounted on a ceiling or wall CeilingWall  Example of mounting on a surface above Camera Camera mounting bracket Mounting spacer suppliedIndoor Pan/tilt Head AW-PH400 System configuration Connections Video OUTWhen an SDI card AW-HHD870 has been installed Connection of a remote operation panelInput Output Connection of the Indoor Pan-tilt Head AW-PH360  AW-IF400 Switch settings when the AW-RP400 is used HD/SD-SDI Connection of the Indoor Pan-tilt Head AW-PH400 SW1 SW2 SET UP 10BASE-T Connection of the Indoor Pan-tilt Head AW-PH405  AW-IF400 Switch settings when the AW-RP400 is used HD/SD HD/SD-SDI Connection of the Outdoor Pan-tilt Head AW-PH650  AW-IF400 Switch settings when the AW-RP400 is used HD/SD How to operate the system Control exercised from the Remote Operation Panel AW-CB400How to operate the system Procedure for camera menu operation AW-CB400 Jog dial main How to operate the system Procedure for camera menu operation AW-RP655 How to operate the system Mode How to operate the system Procedure for camera menu operation AW-RP555 Use mode setting Use Mode SettingSelecting Operating procedure Adjust the black balanceTake the shots Adjustment Flange back adjustment For zoom lensAutomatic iris power zoom lens Iris gain control in a lensWhite balance adjustment  Automatic white balance control AWB AWB A/AWB B Automatic tracking white balance setting ATW  Manual white balance setting Preset of 3200K or 5600K white balance Black balance adjustment Total pedestal level adjustment Genlock adjustment  Horizontal phase controlWhen adjusting the phase of HD signals When adjusting the phase of SD signals Adjustment by camera menu Color phase adjustment Menu item setting/changing Menu item setting Setting when using the camera by itself Main menu of Halogen, Fluorescent, Outdoor Mode Main menu of User Mode Main menu screen Sub menu Halogen, Fluorescent, Outdoor Mode Description of the setting screen  Detecting ratio adjustment Light PEAK/AVG P50 to A50 Gain setting Gain Auto, -6 dB to 18 dB  AGC maximum gain setting AGC Max Gain 6 dB, 12 dB, 18 dB Black level setting Pedestal -150 to +150 DB to -1 dB Color Set  Chroma level adjustment Chroma Level -3 to +3  Skin color adjustment Flesh Tone -3 to +3 Clean DNR setting Clean DNR Off, Low, High  Detail level setting Level Off, Low, High Subcarrier phase fine adjustment SC Fine -127 to +127  Video output format setting Format 480i, 720pHorizontal phase can be adjusted when a genlock signal  SD 480i 2D LPF SD 2D LPF Off, Low, High Component output setting Component RGB, Y/Pb/Pr, Y/C Iris Control NGPage Menu item setting/changing User Mode Sub menu User Mode Brightness Set Display  HD Detail Set Display SD Detail Set Display  Color Matrix Set Display Color Correction Set Display  G/L Set Display  Other Set Display Detecting ratio adjustment Light PEAK/AVG P50 to A50  Gain setting Gain Auto, -6 dB to 18 dB  AGC maximum gain setting AGC Max Gain 6 dB, 12 dB, 18 dB Black level setting Pedestal -150 to +150  Color Set  Chroma level adjustment Chroma Level -3 to +3 Pedestal, B Pedestal Detail band setting Detail Band 1 to  Noise suppress level setting Noise Suppress 1 to Level dependent level setting Level Dependent 0 % to 25 %  Dark detail level setting Dark Detail 0 to  Chroma detail level setting Chroma Detail 0 to Clean DNR setting Clean DNR Off, Low, High  Detail band setting Detail Band 1 to  Noise suppress level setting Noise Suppress 1 to Level dependent level setting Level Dependent 0 % to 25 %  Dark detail level setting Dark Detail 0 to  Chroma detail level setting Chroma Detail 0 to Clean DNR setting Clean DNR Off, Low, High Linear Matrix R-B MatrixR-B -31 to +31 Linear Matrix G-R MatrixG-R -31 to +31Linear Matrix G-B MatrixG-B -31 to +31 Linear Matrix B-R MatrixB-R -31 to +31Color Correction Set  G/L Set  Horizontal phase adjustment H Phase -206 to +49  Subcarrier phase fine adjustment SC Fine -127 to +127 Other Set  Gamma level setting Gamma 0.35 to  Knee level setting Knee Point 88 % to 98 %, Dynamic Flare correction level setting Flare R/G/B 0 to  Black stretch setting Black Stretch Off, On EBU matrix setting EBU Matrix Set Off, On  Video output format setting Format 480i, 720p Component output setting Component RGB, Y/Pb/Pr, Y/C Menu item setting/changing User Mode Changing the settings Changing the format settingsChanging the component setting Setting the EBU matrix Setting to initial set Factory presets Setting to initial setInitial settings of the setting items Factory preset values  Halogen, Fluorescent, Outdoor ModeUser EBU Matrix Set Troubleshooting No powerUsing the controller Cannot operateLens Cannot displayMenus  Check that the unit and lens have been connected properlySettings Camera’s imagesAre not displayed or They are disturbedSomething is wrong With the coloringPictures Pictures are tooIndicators flash Fan Error isMultiple color bands Color bars are Displayed Controller’sAppearance Unit inch mmSpecifications Video output format setting Input/Output connectorsIndicator White balanceAllowable temperature ranges Dimensions W  H  DWeight Ambient operating humidityMemo Memo Eastern Zone