Panasonic AW-HE870N operating instructions  Example of mounting on a surface above Camera

Page 22

Mounting

The connection and installation should be done by qualified service personnel or system installers. Refer any servicing to qualified service personnel.

Example of mounting the camera onto a bracket or tripod made by another manufacturer

Mounting screw (M4)

Hitch the end of the wire onto the anchor bolt by tightening the nut or screw or by using a hook.

Drop-prevention wire

Mounting spacer (supplied)

Camera mounting screw holes

Bracket or tripod made by

another manufacturer

Flat washers Spring washers

Mounting screws

(Inch screws: 1/4-20UNC)

Example of mounting on a surface above the

camera

Mounting screws

(Inch screws: 1/4-20UNC)

Spring washers

Flat washers

Adjust the camera mounting bracket on the surface above the camera so that the ventilation holes of the cooling fan will not be blocked.

Camera mounting bracket

Mounting spacer (supplied)

Hitch the end of the wire onto the anchor bolt by tightening the nut or screw or by using a hook.

Drop-prevention wire

Mounting screw (M4)

Notes

Ensure that the installation location is strong enough to bear at least five times the total weight.

Even when the camera has been mounted on a tripod, be absolutely sure to take steps to prevent the camera from falling.

Tighten the mounting screws and mounting spacers using the torque levels shown in the table to the right, and then check for play and unsteadiness.

-22 -

Screws/Spacer	Clamping torque

Mounting screws (M4)	1.5N • m (15 kgf • cm)

Mounting screws (Inch screws)	2.0N • m (20 kgf • cm)

Mounting spacer	2.0N • m (20 kgf • cm)

Image 22

Contents Installation instructions provided Operating InstructionsFCC Note Risk of Electric Shock Do not OpenPage Important Safety Instructions Contents Menu item setting/changing User Mode Menu item setting/changingChanging the settings Operating Instructions DC cable 9.84 ft m Standard accessoriesPreface Mounting spacerFeatures  Down converter a standard featureSpecial notes on operation Precautions for use DON’TSDOS Concerning the installation location of the camera Precautions for installationConcerning electromagnetic interference Concerning the mounting screws and drop-prevention wire Tightening the mounting screws and mounting spacer Mounting screws M4 For attaching the drop-prevention wire Parts to be provided by the customer for installation Drop-prevention wire Front view Top view Major operating controls and their functionsFront view / Top view / Rear view / Bottom view Rear view Bottom view  Lens mount  Menu switch Menu ENTER/AWB switch ENTER/AWB  Lens fixing ring knob Iris connector Iris  UP/ABB switch UP/ABB Video output connector Video OUT  DOWN/BAR switch DOWN/BAR Cable clamp  DC 12 V input connector 12 V G/L input connector G/L  Optional card slot Option CardMounting When the pan-tilt head has been usedLens mounting Depth 3/8˝ 10 mm Ceiling  Example where the camera is mounted on a ceiling or wallWall  Example of mounting on a surface above Camera Camera mounting bracket Mounting spacer suppliedIndoor Pan/tilt Head AW-PH400 System configuration Connections Video OUTWhen an SDI card AW-HHD870 has been installed Connection of a remote operation panelInput Output Connection of the Indoor Pan-tilt Head AW-PH360  AW-IF400 Switch settings when the AW-RP400 is used HD/SD-SDI Connection of the Indoor Pan-tilt Head AW-PH400 SW1 SW2 SET UP 10BASE-T Connection of the Indoor Pan-tilt Head AW-PH405  AW-IF400 Switch settings when the AW-RP400 is used HD/SD HD/SD-SDI Connection of the Outdoor Pan-tilt Head AW-PH650  AW-IF400 Switch settings when the AW-RP400 is used HD/SD How to operate the system Control exercised from the Remote Operation Panel AW-CB400How to operate the system Procedure for camera menu operation AW-CB400 Jog dial main How to operate the system Procedure for camera menu operation AW-RP655 How to operate the system Mode How to operate the system Procedure for camera menu operation AW-RP555 Use mode setting Use Mode SettingSelecting Adjust the black balance Operating procedureTake the shots Automatic iris power zoom lens AdjustmentFlange back adjustment For zoom lens Iris gain control in a lensWhite balance adjustment  Automatic white balance control AWB AWB A/AWB B Manual white balance setting  Automatic tracking white balance setting ATW Preset of 3200K or 5600K white balance Black balance adjustment Total pedestal level adjustment  Horizontal phase control Genlock adjustmentWhen adjusting the phase of HD signals When adjusting the phase of SD signals Adjustment by camera menu Color phase adjustment Menu item setting Menu item setting/changing Setting when using the camera by itself Main menu of User Mode Main menu of Halogen, Fluorescent, Outdoor Mode Main menu screen Sub menu Halogen, Fluorescent, Outdoor Mode Description of the setting screen  Detecting ratio adjustment Light PEAK/AVG P50 to A50 Black level setting Pedestal -150 to +150  Gain setting Gain Auto, -6 dB to 18 dB AGC maximum gain setting AGC Max Gain 6 dB, 12 dB, 18 dB DB to -1 dB Color Set  Chroma level adjustment Chroma Level -3 to +3  Skin color adjustment Flesh Tone -3 to +3 Clean DNR setting Clean DNR Off, Low, High  Detail level setting Level Off, Low, HighHorizontal phase can be adjusted when a genlock signal  Subcarrier phase fine adjustment SC Fine -127 to +127 Video output format setting Format 480i, 720p  SD 480i 2D LPF SD 2D LPF Off, Low, High Component output setting Component RGB, Y/Pb/Pr, Y/C Iris Control NGPage  Brightness Set Display Menu item setting/changing User ModeSub menu User Mode  HD Detail Set Display Color Matrix Set Display  SD Detail Set Display Color Correction Set Display  G/L Set Display  Other Set Display Detecting ratio adjustment Light PEAK/AVG P50 to A50  AGC maximum gain setting AGC Max Gain 6 dB, 12 dB, 18 dB  Gain setting Gain Auto, -6 dB to 18 dB Black level setting Pedestal -150 to +150  Color Set  Chroma level adjustment Chroma Level -3 to +3 Pedestal, B Pedestal Noise suppress level setting Noise Suppress 1 to  Detail band setting Detail Band 1 to Level dependent level setting Level Dependent 0 % to 25 %  Chroma detail level setting Chroma Detail 0 to  Dark detail level setting Dark Detail 0 to Clean DNR setting Clean DNR Off, Low, High  Noise suppress level setting Noise Suppress 1 to  Detail band setting Detail Band 1 to Level dependent level setting Level Dependent 0 % to 25 %  Chroma detail level setting Chroma Detail 0 to  Dark detail level setting Dark Detail 0 to Clean DNR setting Clean DNR Off, Low, High Linear Matrix G-B MatrixG-B -31 to +31 Linear Matrix R-B MatrixR-B -31 to +31Linear Matrix G-R MatrixG-R -31 to +31 Linear Matrix B-R MatrixB-R -31 to +31Color Correction Set  Other Set  Gamma level setting Gamma 0.35 to  G/L Set  Horizontal phase adjustment H Phase -206 to +49 Subcarrier phase fine adjustment SC Fine -127 to +127  Knee level setting Knee Point 88 % to 98 %, Dynamic EBU matrix setting EBU Matrix Set Off, On  Flare correction level setting Flare R/G/B 0 to Black stretch setting Black Stretch Off, On  Video output format setting Format 480i, 720p Component output setting Component RGB, Y/Pb/Pr, Y/C Menu item setting/changing User Mode Changing the settings Changing the format settingsChanging the component setting Setting the EBU matrix Setting to initial set Factory presets Setting to initial setInitial settings of the setting items Factory preset values  Halogen, Fluorescent, Outdoor ModeUser EBU Matrix Set Using the controller TroubleshootingNo power Cannot operateMenus LensCannot display  Check that the unit and lens have been connected properlyAre not displayed or SettingsCamera’s images They are disturbedPictures Something is wrongWith the coloring Pictures are tooMultiple color bands Color bars are Indicators flashFan Error is Displayed Controller’sAppearance Unit inch mmSpecifications Indicator Video output format settingInput/Output connectors White balanceWeight Allowable temperature rangesDimensions W  H  D Ambient operating humidityMemo Memo Eastern Zone