Panasonic AW-HE870N Preface, Standard accessories, Operating Instructions DC cable 9.84 ft m

Page 7

Preface

This is an HD/SD multi-format camera that adopts 14-bit analog to digital conversion and digital video signal processing, with a compact and lightweight 2/3˝ 3CCD system offering high reliability and availability of multiple functions.

Setting and switching of the camera’s status and its various functions can be performed easily with the menu screen system.

The camera can be connected with peripheral devices, such as a remote control panel or a pan-tilt head, allowing for system development according to the intended use.

The camera can be used for even more applications by inserting an option card.

Note

In order to protect the environment when the HD convertible camera is to be discarded at the end of its service life, ask a specialized contractor to dispose of it properly.

Standard accessories

Operating Instructions	1
DC cable (9.84 ft. [3 m])	1

Use this to supply the camera’s DC power. (Refer to “ DC 12 V input connector” on page 18.)

Mounting spacer

1

Use this when mounting the drop-prevention wire of the camera.

(Refer to “ Camera mounting screw holes” on page 16.)

- 7 -

Image 7

Contents Operating Instructions Installation instructions providedRisk of Electric Shock Do not Open FCC NotePage Important Safety Instructions Contents Menu item setting/changing User Mode Menu item setting/changingChanging the settings Mounting spacer Standard accessoriesPreface Operating Instructions DC cable 9.84 ft m Down converter a standard feature FeaturesSpecial notes on operation DON’TS Precautions for useDOS Concerning the installation location of the camera Precautions for installationConcerning electromagnetic interference Tightening the mounting screws and mounting spacer Concerning the mounting screws and drop-prevention wire Mounting screws M4 For attaching the drop-prevention wire Parts to be provided by the customer for installation Drop-prevention wire Rear view Bottom view  Major operating controls and their functionsFront view / Top view / Rear view / Bottom view Front view Top view Lens fixing ring knob  Menu switch Menu ENTER/AWB switch ENTER/AWB  Lens mount DOWN/BAR switch DOWN/BAR  UP/ABB switch UP/ABB Video output connector Video OUT  Iris connector Iris Optional card slot Option Card  DC 12 V input connector 12 V G/L input connector G/L  Cable clampMounting When the pan-tilt head has been usedLens mounting Depth 3/8˝ 10 mm Ceiling  Example where the camera is mounted on a ceiling or wallWall Camera mounting bracket Mounting spacer supplied  Example of mounting on a surface above CameraIndoor Pan/tilt Head AW-PH400 Video OUT System configuration ConnectionsConnection of a remote operation panel When an SDI card AW-HHD870 has been installedInput Output Connection of the Indoor Pan-tilt Head AW-PH360  AW-IF400 Switch settings when the AW-RP400 is used HD/SD-SDI Connection of the Indoor Pan-tilt Head AW-PH400 SW1 SW2 SET UP 10BASE-T Connection of the Indoor Pan-tilt Head AW-PH405  AW-IF400 Switch settings when the AW-RP400 is used HD/SD HD/SD-SDI Connection of the Outdoor Pan-tilt Head AW-PH650  AW-IF400 Switch settings when the AW-RP400 is used HD/SD Control exercised from the Remote Operation Panel AW-CB400 How to operate the systemHow to operate the system Procedure for camera menu operation AW-CB400 Jog dial main How to operate the system Procedure for camera menu operation AW-RP655 How to operate the system Mode How to operate the system Procedure for camera menu operation AW-RP555 Use Mode Setting Use mode settingSelecting Adjust the black balance Operating procedureTake the shots Iris gain control in a lens AdjustmentFlange back adjustment For zoom lens Automatic iris power zoom lens Automatic white balance control AWB AWB A/AWB B White balance adjustment Manual white balance setting  Automatic tracking white balance setting ATW Preset of 3200K or 5600K white balance Black balance adjustment Total pedestal level adjustment  Horizontal phase control Genlock adjustmentWhen adjusting the phase of HD signals Adjustment by camera menu When adjusting the phase of SD signals Color phase adjustment Menu item setting Menu item setting/changing Setting when using the camera by itself Main menu of User Mode Main menu of Halogen, Fluorescent, Outdoor Mode Main menu screen Sub menu Halogen, Fluorescent, Outdoor Mode  Detecting ratio adjustment Light PEAK/AVG P50 to A50 Description of the setting screenDB to -1 dB  Gain setting Gain Auto, -6 dB to 18 dB AGC maximum gain setting AGC Max Gain 6 dB, 12 dB, 18 dB  Black level setting Pedestal -150 to +150 Skin color adjustment Flesh Tone -3 to +3  Color Set  Chroma level adjustment Chroma Level -3 to +3 Detail level setting Level Off, Low, High  Clean DNR setting Clean DNR Off, Low, High SD 480i 2D LPF SD 2D LPF Off, Low, High  Subcarrier phase fine adjustment SC Fine -127 to +127 Video output format setting Format 480i, 720p Horizontal phase can be adjusted when a genlock signalIris Control NG  Component output setting Component RGB, Y/Pb/Pr, Y/CPage  HD Detail Set Display Menu item setting/changing User ModeSub menu User Mode  Brightness Set Display Color Matrix Set Display  SD Detail Set Display Color Correction Set Display  Other Set Display  G/L Set Display Detecting ratio adjustment Light PEAK/AVG P50 to A50  AGC maximum gain setting AGC Max Gain 6 dB, 12 dB, 18 dB  Gain setting Gain Auto, -6 dB to 18 dB Black level setting Pedestal -150 to +150 Pedestal, B Pedestal  Color Set  Chroma level adjustment Chroma Level -3 to +3 Noise suppress level setting Noise Suppress 1 to  Detail band setting Detail Band 1 to Level dependent level setting Level Dependent 0 % to 25 %  Chroma detail level setting Chroma Detail 0 to  Dark detail level setting Dark Detail 0 to Clean DNR setting Clean DNR Off, Low, High  Noise suppress level setting Noise Suppress 1 to  Detail band setting Detail Band 1 to Level dependent level setting Level Dependent 0 % to 25 %  Chroma detail level setting Chroma Detail 0 to  Dark detail level setting Dark Detail 0 to Clean DNR setting Clean DNR Off, Low, High Linear Matrix B-R MatrixB-R -31 to +31 Linear Matrix R-B MatrixR-B -31 to +31Linear Matrix G-R MatrixG-R -31 to +31 Linear Matrix G-B MatrixG-B -31 to +31Color Correction Set  Knee level setting Knee Point 88 % to 98 %, Dynamic  G/L Set  Horizontal phase adjustment H Phase -206 to +49 Subcarrier phase fine adjustment SC Fine -127 to +127  Other Set  Gamma level setting Gamma 0.35 to Video output format setting Format 480i, 720p  Flare correction level setting Flare R/G/B 0 to Black stretch setting Black Stretch Off, On  EBU matrix setting EBU Matrix Set Off, On Component output setting Component RGB, Y/Pb/Pr, Y/C Menu item setting/changing User Mode Changing the format settings Changing the settingsChanging the component setting Setting the EBU matrix Setting to initial set Setting to initial set Factory presets Halogen, Fluorescent, Outdoor Mode Initial settings of the setting items Factory preset valuesUser EBU Matrix Set Cannot operate TroubleshootingNo power Using the controller Check that the unit and lens have been connected properly LensCannot display MenusThey are disturbed SettingsCamera’s images Are not displayed orPictures are too Something is wrongWith the coloring PicturesDisplayed Controller’s Indicators flashFan Error is Multiple color bands Color bars areUnit inch mm AppearanceSpecifications White balance Video output format settingInput/Output connectors IndicatorAmbient operating humidity Allowable temperature rangesDimensions W  H  D WeightMemo Memo Eastern Zone