Panasonic AW-HE870N Camera’s images, Are not displayed or, They are disturbed, Settings

Page 95

Troubleshooting

 Video

	Symptom	Cause and remedial action	Reference
	Symptom	Cause and remedial action	pages
			pages
		 Is the unit connected to the pan-tilt head and controller properly?	P.27 to 38
		 Refer to the Operating Instructions of the pan-tilt head or the controller.	P.27 to 38


		 Has the power of the connected equipment been turned on?	—
		 Refer to the Operating Instructions of the pan-tilt head or the controller.	—


		 In the case of a system configuration (using a switcher or other unit) with
		which the images are also switched when the camera to be operated is	—
	The camera’s images	selected, has the unit — rather than another camera — been selected?
	are not displayed or	 Has the video output been selected properly?	P.67 to 68
	they are disturbed	 Has the video output been selected properly?
		 Check the video output format, component output selection, and other
			P.83 to 84
		settings.	P.83 to 84
		settings.

		 Is the camera being used in conditions under which its use is prohibited?	P.12, P.99
		 Check the precautions for installation and the camera’s specifications.	P.12, P.99


		 When the genlock function is being used	P.26,
		 Check that the genlock sync signals are being input properly.	P.26,
			P.57 to 59
		 Check that the horizontal phase and color phase have been set correctly.	P.57 to 59

- 95 -

Image 95

Contents Operating Instructions Installation instructions providedRisk of Electric Shock Do not Open FCC NotePage Important Safety Instructions Contents Changing the settings Menu item setting/changingMenu item setting/changing User Mode Mounting spacer Standard accessoriesPreface Operating Instructions DC cable 9.84 ft m Down converter a standard feature FeaturesSpecial notes on operation DON’TS Precautions for useDOS Concerning electromagnetic interference Precautions for installationConcerning the installation location of the camera Tightening the mounting screws and mounting spacer Concerning the mounting screws and drop-prevention wire Drop-prevention wire Parts to be provided by the customer for installation Mounting screws M4 For attaching the drop-prevention wire Rear view Bottom view  Major operating controls and their functionsFront view / Top view / Rear view / Bottom view Front view Top view Lens fixing ring knob  Menu switch Menu ENTER/AWB switch ENTER/AWB  Lens mount DOWN/BAR switch DOWN/BAR  UP/ABB switch UP/ABB Video output connector Video OUT  Iris connector Iris Optional card slot Option Card  DC 12 V input connector 12 V G/L input connector G/L  Cable clampLens mounting When the pan-tilt head has been usedMounting Depth 3/8˝ 10 mm Wall  Example where the camera is mounted on a ceiling or wallCeiling Camera mounting bracket Mounting spacer supplied  Example of mounting on a surface above CameraIndoor Pan/tilt Head AW-PH400 Video OUT System configuration ConnectionsConnection of a remote operation panel When an SDI card AW-HHD870 has been installedInput Output Connection of the Indoor Pan-tilt Head AW-PH360  AW-IF400 Switch settings when the AW-RP400 is used HD/SD-SDI Connection of the Indoor Pan-tilt Head AW-PH400 SW1 SW2 SET UP 10BASE-T Connection of the Indoor Pan-tilt Head AW-PH405  AW-IF400 Switch settings when the AW-RP400 is used HD/SD HD/SD-SDI Connection of the Outdoor Pan-tilt Head AW-PH650  AW-IF400 Switch settings when the AW-RP400 is used HD/SD Control exercised from the Remote Operation Panel AW-CB400 How to operate the systemHow to operate the system Procedure for camera menu operation AW-CB400 Jog dial main How to operate the system Procedure for camera menu operation AW-RP655 How to operate the system Mode How to operate the system Procedure for camera menu operation AW-RP555 Use Mode Setting Use mode settingSelecting Take the shots Operating procedureAdjust the black balance Iris gain control in a lens AdjustmentFlange back adjustment For zoom lens Automatic iris power zoom lens Automatic white balance control AWB AWB A/AWB B White balance adjustment Preset of 3200K or 5600K white balance  Automatic tracking white balance setting ATW Manual white balance setting Black balance adjustment Total pedestal level adjustment When adjusting the phase of HD signals Genlock adjustment Horizontal phase control Adjustment by camera menu When adjusting the phase of SD signals Color phase adjustment  Setting when using the camera by itself Menu item setting/changingMenu item setting  Main menu screen Main menu of Halogen, Fluorescent, Outdoor ModeMain menu of User Mode Sub menu Halogen, Fluorescent, Outdoor Mode  Detecting ratio adjustment Light PEAK/AVG P50 to A50 Description of the setting screenDB to -1 dB  Gain setting Gain Auto, -6 dB to 18 dB AGC maximum gain setting AGC Max Gain 6 dB, 12 dB, 18 dB  Black level setting Pedestal -150 to +150 Skin color adjustment Flesh Tone -3 to +3  Color Set  Chroma level adjustment Chroma Level -3 to +3 Detail level setting Level Off, Low, High  Clean DNR setting Clean DNR Off, Low, High SD 480i 2D LPF SD 2D LPF Off, Low, High  Subcarrier phase fine adjustment SC Fine -127 to +127 Video output format setting Format 480i, 720p Horizontal phase can be adjusted when a genlock signalIris Control NG  Component output setting Component RGB, Y/Pb/Pr, Y/CPage  HD Detail Set Display Menu item setting/changing User ModeSub menu User Mode  Brightness Set Display Color Correction Set Display  SD Detail Set Display Color Matrix Set Display  Other Set Display  G/L Set Display Detecting ratio adjustment Light PEAK/AVG P50 to A50  Black level setting Pedestal -150 to +150  Gain setting Gain Auto, -6 dB to 18 dB AGC maximum gain setting AGC Max Gain 6 dB, 12 dB, 18 dB Pedestal, B Pedestal  Color Set  Chroma level adjustment Chroma Level -3 to +3 Level dependent level setting Level Dependent 0 % to 25 %  Detail band setting Detail Band 1 to Noise suppress level setting Noise Suppress 1 to  Clean DNR setting Clean DNR Off, Low, High  Dark detail level setting Dark Detail 0 to Chroma detail level setting Chroma Detail 0 to  Level dependent level setting Level Dependent 0 % to 25 %  Detail band setting Detail Band 1 to Noise suppress level setting Noise Suppress 1 to  Clean DNR setting Clean DNR Off, Low, High  Dark detail level setting Dark Detail 0 to Chroma detail level setting Chroma Detail 0 to Linear Matrix B-R MatrixB-R -31 to +31 Linear Matrix R-B MatrixR-B -31 to +31Linear Matrix G-R MatrixG-R -31 to +31 Linear Matrix G-B MatrixG-B -31 to +31Color Correction Set  Knee level setting Knee Point 88 % to 98 %, Dynamic  G/L Set  Horizontal phase adjustment H Phase -206 to +49 Subcarrier phase fine adjustment SC Fine -127 to +127  Other Set  Gamma level setting Gamma 0.35 to Video output format setting Format 480i, 720p  Flare correction level setting Flare R/G/B 0 to Black stretch setting Black Stretch Off, On  EBU matrix setting EBU Matrix Set Off, On Component output setting Component RGB, Y/Pb/Pr, Y/C Menu item setting/changing User Mode Changing the format settings Changing the settingsChanging the component setting Setting the EBU matrix Setting to initial set Setting to initial set Factory presets Halogen, Fluorescent, Outdoor Mode Initial settings of the setting items Factory preset valuesUser EBU Matrix Set Cannot operate TroubleshootingNo power Using the controller Check that the unit and lens have been connected properly LensCannot display MenusThey are disturbed SettingsCamera’s images Are not displayed orPictures are too Something is wrongWith the coloring PicturesDisplayed Controller’s Indicators flashFan Error is Multiple color bands Color bars areUnit inch mm AppearanceSpecifications White balance Video output format settingInput/Output connectors IndicatorAmbient operating humidity Allowable temperature rangesDimensions W  H  D WeightMemo Memo Eastern Zone