Panasonic AW-HE870N operating instructions

Page 69

Menu item setting/changing (Halogen, Fluorescent, Outdoor Mode)

Character output selection [Character Mix

Component: Off, On / Composite: Off, On /

Option: Off, On]

This is used to select how the camera menu, status and other characters are to be output (Off or On). Component: How the characters to the component

signals (RGB, Y/Pb/Pr) are output is selected.

Composite: Character output method for composite signals and Y/C signals is selected.

Option: How the characters to the optional card are output is selected.

Composite, Y/C setup selection [Composite, Y/C Setup: Off, On]

The composite signals and the color bar setup level of Y/C signal output (Off: 0.0 IRE or On: 7.5 IRE) can be selected.

Notes

When the menu is started within 1 minute or so after the camera has been turned on, the characters are displayed in all the outputs.

The selection of Option as the Character Mix setting takes effect when an optional card has been installed.

- 69 -

Image 69

Contents Operating Instructions Installation instructions providedRisk of Electric Shock Do not Open FCC NotePage Important Safety Instructions Contents Menu item setting/changing Menu item setting/changing User ModeChanging the settings Preface Standard accessoriesOperating Instructions DC cable 9.84 ft m Mounting spacer Down converter a standard feature FeaturesSpecial notes on operation DON’TS Precautions for useDOS Precautions for installation Concerning the installation location of the cameraConcerning electromagnetic interference Tightening the mounting screws and mounting spacer Concerning the mounting screws and drop-prevention wireParts to be provided by the customer for installation  Mounting screws M4 For attaching the drop-prevention wire Drop-prevention wire Front view / Top view / Rear view / Bottom view Major operating controls and their functionsFront view Top view Rear view Bottom view  ENTER/AWB switch ENTER/AWB  Menu switch Menu Lens mount  Lens fixing ring knob Video output connector Video OUT  UP/ABB switch UP/ABB Iris connector Iris  DOWN/BAR switch DOWN/BAR G/L input connector G/L  DC 12 V input connector 12 V Cable clamp  Optional card slot Option CardWhen the pan-tilt head has been used MountingLens mounting Depth 3/8˝ 10 mm  Example where the camera is mounted on a ceiling or wall CeilingWall Camera mounting bracket Mounting spacer supplied  Example of mounting on a surface above CameraIndoor Pan/tilt Head AW-PH400 Video OUT System configuration ConnectionsConnection of a remote operation panel When an SDI card AW-HHD870 has been installedInput Output Connection of the Indoor Pan-tilt Head AW-PH360  AW-IF400 Switch settings when the AW-RP400 is used HD/SD-SDI Connection of the Indoor Pan-tilt Head AW-PH400 SW1 SW2 SET UP 10BASE-T Connection of the Indoor Pan-tilt Head AW-PH405  AW-IF400 Switch settings when the AW-RP400 is used HD/SD HD/SD-SDI Connection of the Outdoor Pan-tilt Head AW-PH650  AW-IF400 Switch settings when the AW-RP400 is used HD/SD Control exercised from the Remote Operation Panel AW-CB400 How to operate the systemHow to operate the system Procedure for camera menu operation AW-CB400 Jog dial main How to operate the system Procedure for camera menu operation AW-RP655 How to operate the system Mode How to operate the system Procedure for camera menu operation AW-RP555 Use Mode Setting Use mode settingSelecting Operating procedure Adjust the black balanceTake the shots Flange back adjustment For zoom lens AdjustmentAutomatic iris power zoom lens Iris gain control in a lens Automatic white balance control AWB AWB A/AWB B White balance adjustment Automatic tracking white balance setting ATW  Manual white balance setting Preset of 3200K or 5600K white balance Black balance adjustment Total pedestal level adjustment Genlock adjustment  Horizontal phase controlWhen adjusting the phase of HD signals Adjustment by camera menu When adjusting the phase of SD signals Color phase adjustment Menu item setting/changing Menu item setting Setting when using the camera by itself Main menu of Halogen, Fluorescent, Outdoor Mode Main menu of User Mode Main menu screen Sub menu Halogen, Fluorescent, Outdoor Mode  Detecting ratio adjustment Light PEAK/AVG P50 to A50 Description of the setting screen AGC maximum gain setting AGC Max Gain 6 dB, 12 dB, 18 dB  Gain setting Gain Auto, -6 dB to 18 dB Black level setting Pedestal -150 to +150 DB to -1 dB Skin color adjustment Flesh Tone -3 to +3  Color Set  Chroma level adjustment Chroma Level -3 to +3 Detail level setting Level Off, Low, High  Clean DNR setting Clean DNR Off, Low, High Video output format setting Format 480i, 720p  Subcarrier phase fine adjustment SC Fine -127 to +127Horizontal phase can be adjusted when a genlock signal  SD 480i 2D LPF SD 2D LPF Off, Low, HighIris Control NG  Component output setting Component RGB, Y/Pb/Pr, Y/CPage Sub menu User Mode Menu item setting/changing User Mode Brightness Set Display  HD Detail Set Display SD Detail Set Display  Color Matrix Set Display Color Correction Set Display  Other Set Display  G/L Set Display Detecting ratio adjustment Light PEAK/AVG P50 to A50  Gain setting Gain Auto, -6 dB to 18 dB  AGC maximum gain setting AGC Max Gain 6 dB, 12 dB, 18 dB Black level setting Pedestal -150 to +150 Pedestal, B Pedestal  Color Set  Chroma level adjustment Chroma Level -3 to +3 Detail band setting Detail Band 1 to  Noise suppress level setting Noise Suppress 1 to Level dependent level setting Level Dependent 0 % to 25 %  Dark detail level setting Dark Detail 0 to  Chroma detail level setting Chroma Detail 0 to Clean DNR setting Clean DNR Off, Low, High  Detail band setting Detail Band 1 to  Noise suppress level setting Noise Suppress 1 to Level dependent level setting Level Dependent 0 % to 25 %  Dark detail level setting Dark Detail 0 to  Chroma detail level setting Chroma Detail 0 to Clean DNR setting Clean DNR Off, Low, High Linear Matrix G-R MatrixG-R -31 to +31 Linear Matrix R-B MatrixR-B -31 to +31Linear Matrix G-B MatrixG-B -31 to +31 Linear Matrix B-R MatrixB-R -31 to +31Color Correction Set  Subcarrier phase fine adjustment SC Fine -127 to +127  G/L Set  Horizontal phase adjustment H Phase -206 to +49 Other Set  Gamma level setting Gamma 0.35 to  Knee level setting Knee Point 88 % to 98 %, Dynamic Black stretch setting Black Stretch Off, On  Flare correction level setting Flare R/G/B 0 to EBU matrix setting EBU Matrix Set Off, On  Video output format setting Format 480i, 720p Component output setting Component RGB, Y/Pb/Pr, Y/C Menu item setting/changing User Mode Changing the format settings Changing the settingsChanging the component setting Setting the EBU matrix Setting to initial set Setting to initial set Factory presets Halogen, Fluorescent, Outdoor Mode Initial settings of the setting items Factory preset valuesUser EBU Matrix Set No power TroubleshootingUsing the controller Cannot operateCannot display LensMenus  Check that the unit and lens have been connected properlyCamera’s images SettingsAre not displayed or They are disturbedWith the coloring Something is wrongPictures Pictures are tooFan Error is Indicators flashMultiple color bands Color bars are Displayed Controller’sUnit inch mm AppearanceSpecifications Input/Output connectors Video output format settingIndicator White balanceDimensions W  H  D Allowable temperature rangesWeight Ambient operating humidityMemo Memo Eastern Zone