11. Lens Aperture Display
The lens aparture/iris is adjusted automatically according to the incoming light intensity. The
Note: If the
12. Lens Iris Selection Display
The setting of the Lens Iris Selection Switch (7) is | displayed. |
| |
|
|
|
|
Display |
| Description |
|
|
|
|
|
+ | The Lens Iris Selection Switch (7) | is set to 1/2 OPEN. The lens iris is opened an extra 1/2 |
|
dard Iens iris/aperture |
|
| |
|
|
| |
|
|
| |
no dlsplay | The Lens Iris Selection Swich (7) is set to NOR (normal) Lens iris/aperlure is normal. |
| |
|
|
| |
|
|
| |
| The Lens lris Selection Switch (7) is set to 1/2 CLOSE. The lens iris is closed an extra 1/2 |
| |
| dard lens iris/aperture. |
|
|
|
|
|
|
13. Low Light Display
When the peak level of the incoming light results in a video SignaI of 40 IRE or less, ‘L’ is displayed constantly. The Auto White Balance Control (AWC) is not available when the ‘L’ is displayed.
| Dlsplay | Description |
|
|
|
| None | The peak level of incoming Iight generates 40 IRE or more |
|
|
|
| L | The peak level of incoming Iight generates 40 IRE or less |
14. Camera Power and Anton Bauer Intelligent Digital Battery
The voltage level supplied to the camera, from the Battery Pack, AC Adaptor/Charger or VTR is dis- played.
| 13v | OFF | Approx |
|
|
|
|
|
| OFF | Approx 12V |
|
|
|
|
|
| OFF | Approx |
|
|
|
|
|
| OFF | Approx |
|
|
|
|
|
| OFF | Approx 8V |
|
|
|
|
|
| OFF | Approx |
|
|
|
|
|
|
| 10 |
|
|
|
|
Note: If ‘BATT’ is displayed, replace the battery pack The battery pack wilI supply suffnent power for only a few minutes after this display lights
This is also indicated when the Check Button (25) is pressed
The batteries condition | can be monitored when using | |
t h e | MII VTR | with A n t o n Bauer Intelligent |
Digltal | Battery |
|
Remove the Left Side Cover and set the Battery Indication Switch to the ANTON position
The remaining battery life is indicated as shown below.
15. Back Light Compensation Display
When the back light compensation state is displayed for one second when this swich is turned on.
16. High Gain Selection Display
When the setting of the High Cam Selection Switch
(29) on the camera (119) | or (174) on the Remote |
C o n t r o l Unit is changed, | this is indlcated in the |
viewfinder for one second |
|
|
|
|
10% | OFF | 10% |
|
|
|
EMP |
| No |
|
|
|
Caution: Do not use the camera with ‘HIGH’ dlsplay
- 73 -