Panasonic AJ- E operating instructions 6 MIC/AUDIO2, 7 TC/UB

Item/

Variable

Remarks

Data storage

range

FRONT MIC

ON

For selecting the phantom power supply for

POWER

OFF

the front microphone.

C U F

REAR MIC POWER

ON

For selecting the phantom power supply for

C U F

OFF

the rear microphone.

AUDIO OUT

ON

For setting the audio output circuit.

OFF

OFF: The power to the output circuit is shut

down, and the signals of the circuit are

not output.

ON: The signals of the audio output circuit

C U F

are output.

MONITOR SELECT

STEREO

For selecting the format of the signals to be

C U F

MIX

output to the monitor.

FRONT MIC LEVEL

–40dB

For selecting the input level of the front

C U F

–50dB

microphone.

REAR MIC CH1

–50dB

For selecting the input level of the rear

LVL

–60dB

microphone.

C U F

REAR MIC CH2

–50dB

For selecting the input level of the rear

LVL

–60dB

microphone.

C U F

REAR LINE IN LVL

0dB

For selecting the rear line input level.

C U F

+4dB

AUDIO OUT LVL

0dB

For selecting the rear audio output level.

C U F

+4dB

HEADROOM

18dB

For setting the headroom (reference level).

C U F

20dB

WIRELESS WARN

ON

For selecting whether or not to output

OFF

warnings when the reception of the wireless

C U F

receiver is poor.

Item/

Variable

Remarks

Data storage

range

UB MODE

USER

For selecting the UB mode.

TIME

USER:

DATE

Selects the UB value set in the LCD

EXT

section.

TCG

TIME:

FRM RATE

Selects the local time (hour, minute,

REGEN

second).

DATE:

Selects the local date and time (last 2 digits

of year, month, date, hour)

EXT:

When CAM or VIDEO is selected as the

REC SIGNAL menu item setting on the

<SYSTEM MODE> screen, the user bits of

the signal supplied to the TC IN connector

are used as the reference.

When 1394 is selected, user bits of the

signal supplied to the DVCPRO connector

are used as reference.

If the user bits cannot be read, the user bits

which are set in the unit are retained.

TCG:

Inputs the TCG value unchanged.

FRM RATE:

Selects the same camera shooting data

(frame rate, etc.) as the VAUX UB (VITC

UB).

REGEN:

Reads the value recorded on the tape and

C U F

then continues to record from that value.

VITC UB MODE

USER/EXT

For selecting the VAUX TC (VITC) UB mode.

TIME

USER/EXT:

DATE

When EXT is selected as the UB MODE

TCG

setting, the value concerned applies; with

FRM RATE

any other setting, the USER value set by

REGEN

UB is recorded.

TIME: The local time (in hours, minutes and

seconds) is selected.

DATE: The local date (last 2 digits of AD

year, month, day and hours) is

selected.

TCG: The TCG value is used as is for UB.

FRM RATE:

The same shooting information (frame

rate, etc.) of the camera as for VAUX UB

(VITC UB) is selected.

REGEN: The value recorded on the tape is

C U F

read and recorded continuously.