Chapter 2 Parts and their functions
2-1 Power supply and accessory mounting section
6
2
1 | 4 | 3 |
1POWER switch
This switch turns the power ON and OFF.
2Battery mount
This is for attaching the Anton Bauer battery pack.
3DC IN (external power input) socket (XLR, 4-pin)
When operating this unit using an AC power source, this socket is connected to the model
4BREAKER switch
If an excessively high current flows inside the unit due to some problem or other, the circuit breaker is tripped and the power is automatically turned off to protect the unit.
Push this button in after an inspection has been conducted or repairs performed inside the unit by a qualified service person. If there are no problems, the power will come back on.
5GPS connector
The connector from
6Shoulder belt fittings
The shoulder belt is attached here.
7Light shoe
Use this to attach the video light, etc.
8Lens mount (bayonet type)
The lens is attached to this mount.
5 7 6
2
9
8
:
>= ; <
:Lens mount cap
To remove the cap, push the lens lever 9 up. Keep the cap in place while the lens is not attached.
;Lens cable/microphone cable clamp
This clamp is for anchoring the lens cable or microphone cable.
<Tripod mount
Mount the tripod attachment
=LENS jack (12-pin)
The connecting cord of the lens is connected to this jack. For further details on the lenses that can be used, refer to the operating instructions of the lenses concerned.
>Easy-to-adjust shoulder pad
The position of the shoulder pad can be adjusted backward or forward so that the unit is balanced when it is carried on the user’s shoulder.
9Lens lever
This lever is tightened to secure the lens after it has been attached to the lens mount.
9