Panasonic AJ- E operating instructions Menu operation section

Page 15

Chapter 2 Parts and their functions

FPLAY/PAUSE button

This is pressed to view the playback picture on the viewfinder screen or using a color video monitor. The button’s lamp comes on during playback.

When it is pressed during playback, the unit is set to pause in the playback mode (PLAY PAUSE), and the button’s lamp flashes. If the unit is left in the pause mode for two minutes, it automatically changes to the stop (STOP) mode.

GREW (rewind) button and lamp

When this button is pressed during stop, the tape is reviewed at high speed. Its lamp lights at this time.

When it is pressed during playback or pause, the tape is reviewed at approximately 4 times the normal tape speed. Both the PLAY lamp and REW lamp light at this time.

HFF (fast forward) button and lamp

When this button is pressed during stop, the tape is cued at high speed. Its lamp lights at this time.

When it is pressed during playback or pause, the tape is cued at approximately 4 times the normal tape speed. Both the PLAY lamp and FF lamp light at this time.

IEMERGENCY screw (inside rubber cap)

If the cassette does not eject even when the EJECT button is pressed, use a screwdriver or similar implement to push and turn the EMERGENCY screw at the same time: this will cause the cassette to be ejected.

For details, refer to “6-3-3 Emergency eject.”

2-4 Menu operation section

2

4

3

2

1

1MENU button

This is used to switch the menu ON and OFF.

2JOG dial button

This is used to select the menu items and perform settings when the MENU button 1 is at the ON position.

3Setup card insertion slot

This is where the SD card (optional accessory) or Multimedia card (optional accessory) is inserted into the unit.

4BUSY (operation mode display) lamp

This lamp shows the operation mode of the setup card. It lights during operation.

<Note>

When this lamp is lighted, refrain from inserting or removing the card.

15

Image 15

Contents Model No Operating Instructions$ do not Remove Panel Cover by Unscrewing Lithium BatteryTo remove the battery/Verwijderen van de batterij Contents Chapter Maintenance Inspections Specifications 106Menu description tables Features of the camera unit Features of the VTR unit ≥ Metadata supported System configuration≥ Dvcpro Ieee 1394 digital input/output connector provided ≥ Built-in time code generator/readerPower supply and accessory mounting section Audio function section input system FrontRear Audio function section output system Shooting and recording camera unit Bars Shooting and recording VTR unitCAM. Auto Knee on CAM. Auto Knee OFF@ ECU Remote remote control connector = Output SEL output signal selection switchVideo OUT Character switch ? Video OUT video signal output connectorMenu operation section CTL Time code related sectionNDF Slave Hold W Remaining tape and remaining battery chargeDisplay window and its displays Displays relating to the VTR unit’s operations and modesDisplays relating to the time code Time code-related switch settings and display itemsMode displays TCG switch position Display switch Display item PositionViewfinder section Cassette tapes Basic procedures From providing the power supply to loading the cassetteUp to performing the switch settings Tape function buttons Procedure for shootingAdjust the white balance 3When adjusting the white balance on the spotEnsuring scene-to-scene continuity at other times Scene-to-scene continuityNews REC function SDC615 Scene-to-scene continuity during rec-pauseONE Shot Procedure for shooting in the on modesPRE-RECORDING function SDC905 Interval REC functionCheckpoints common to all Interval REC modes When the ONE Shot mode of Interval REC is toWhen the Interval REC mode is to be exited Procedure for shooting in the ONE Shot modeNormal playback and playback at different speeds When the Retake function is to be exitedRetake function Rec-review functionOutput CAM Adjusting the white balance and black balanceAdjusting the white balance White balance detection areaWhite balance memories When there is no time to adjust the white balanceWhen the white balance cannot be adjusted automatically Auto tracking white balance settingAdjusting the black balance Black balance memoryUse this to execute ABB Viewfinder screen displays relating to the shutter Setting the electronic shutterSetting the shutter mode and speed Shutter modesItems to be set and what is set Selecting the recording signals and recording systemSetting the synchro scan mode Selecting the recording signalsSelecting the recording system Selecting the audio input signalsAdjusting the audio signal recording levels Concerning what is setUser bit memory function Setting the time dataSetting the user bits CTL Vtcg Time Date P-iRECRegion Setting the internal clock’s date and timeExternally locking the time code Setting the time codeTime code when the battery is replaced Operating procedure for external lockingExamples Setting the Umid informationConcerning the user bit setting during external lock To release the external lockMenu configuration Menu displays on the viewfinder screenBasic menu operations To set an item to on or OFF Selecting the user menusTo increment the value To decrement the valueSelecting the viewfinder screen display items Viewfinder screen status display configurationViewfinder screen status displays Viewfinder lamp displaysMode Check Display item What is displayed Status when display appearsInformation Allocated to UserButtons Display White BAL switchFilter positions Cumulative gainZoom Mode Check Viewfinder screen display selectionZoom Setting the marker displays Setting the camera IDSetting change/adjustment result messages and display modes Mode check screen displays Mode Check button function Checking the return video signal on the viewfinderMarker check screen displays Marker Select button function Setting items and details Menu-driven function setupSetting the User SW Gain switching Selecting the video output signalsSetting items and what is set Selecting the F.AUDIO Level control functionFunctions which can be selected Setting the color temperature manually Handling the setup cardData handling Selecting the file No Setup card operationsFormatting the setup card Saving the data settings on the cardGiving a title to the selected file Saving the data settings to the selected fileLoading the data of the selected file Loading the data saved on the cardHow to use the user data Writing the setting data in the user areaLoading the user data How to use the scene file data Writing the setting data used for the scene filesReading the setting data used for the scene files Scene Read User Data # Scene SEL Write Reset # Read Scene Read User Data Scene SEL Write Reset How to use the lens file data White BAL switchOperation method without performing File menu operations Reference Supplying the powerAttaching the battery and setting the battery type Using the Anton Bauer battery packUsing the BP-90 type battery pack Battery holder Label SurfaceConnect here BP-90 type battery case Using the NP-1 type battery pack Using the V-mount type battery packNP-1 type Battery case +12V Attaching the viewfinder and adjusting its positionUsing an AC power supply When the AJ-B75 AC adapter made by Panasonic is usedAttaching the lens Lens socket Lever for Securing the lens Mount capMark Adjusting the lens flange Adjusting the white shading of the lensApprox meters Set the White BAL selector switch to a or B, Giving a title to the selected file no Storing the lens file dataReading the lens file data Audio input signal preparations When using the front microphoneWhen using an external microphone When using a UniSlot wireless receiver When using a wireless receiverWhen using an audio component When using an externally connected wireless receiverDetaching the unit from the tripod attachment Adjusting the position of the shoulder padMounting the unit on a tripod Attaching the shoulder beltExample showing use of the SHAN-RC700 rain cover Connecting the extension control unit AJ-EC3EAttaching the rain cover Attaching the Front Audio Level control knobInspections prior to shooting Preparation for inspectionsInspecting the camera unit Tape travel inspection Automatic audio level adjustment function inspectionManual audio level adjustment function inspection Inspecting the VTR unitInspection using external microphones Self-diagnosis functionInspections relating to the time code and user bits Maintenance Push Connectors and signalsREC Warning Battery ENDSlack Tape ENDWireless RF HumidServo Tape Near END Battery Near ENDError codes Error codes 81 to 92 relating to the Dvcpro connectorPush in and turn at Emergency ejectEmergency Eject screwMenu configuration How to open the menusHow to interpret the menu lists System Mode CAMRED Option Mode 6SEC REC FunctionOn Memory ONE Shot26P EXT For Output SELGenlock INTMatrix 1 ROPColor Correction LOW Setting Black Strech MID SettingHigh Setting $ Master GainAdditional DTL Direction=SKIN Tone Area Flare For setting the Master GammaKNEE/LEVEL GammaVideo level Camera SettingsVF Displays Zebra pattern displayBAR VF INDICATOR1VF Marker User BOXSAVE&TAPE VF INDICATOR2Mode Check IND 7 !LEDCamera ID Shutter SpeedShutter Select Split SW ModeUser SW SmpteUser SW Gain White Balance ModeCard R/W Select FileIris Card READ/WRITEInitialize DiagnosticLens File System CheckReview Black ShadingWhite Shading VTR FunctionBATTERY/TAPE Battery SETTING1Data storage Range HYTRON120 END Battery SETTING25 MIC/AUDIO1 7 TC/UB 6 MIC/AUDIO2Umid SET/INFO VTR DiagConfig Dflt OptionID MIX INH Video System Analog component outputAudio System Other Connectors Audio Output ConnectorsTime Code Input Connector Time Code Output ConnectorPanasonic Broadcast Europe Panasonic Marketing Europe GmbH