Chapter 4 Adjustments and settings for recording
If one of the following messages appears when the JOG dial button is | Writing the setting data in the user area |
pressed, the data cannot be loaded. |
|
Error message | Remedial action |
|
|
READ NG NO CARD | Insert the card. |
(setup card has not been inserted) |
|
|
|
READ NG FORMAT ERROR | The card was formatted by a device |
(formatting error) | other than the unit. |
| Replace the card. |
|
|
READ NG NO FILE | Save the file data. |
(file not found) |
|
|
|
READ NG ERROR | Data saved by devices other than unit |
(the data cannot be loaded) | cannot be loaded. |
|
|
7 Press the MENU button to exit the menu operations.
The setting menu is cleared, and the displays showing the unit’s current statuses appear at the top and bottom of the viewfinder screen.
4-9-3 How to use the user data
The setting data can be written in the user area of the unit’s internal memory and data written in the memory can be read from this area.
Use of this data speeds up the process of reproducing suitable setup statuses.
To write the data, first perform a menu operation to open the <INITIALIZE> screen from the FILE page, and to read the user data that has been written, first perform a menu operation to open the <SCENE> screen from the FILE page.
#< INITIALIZE >
READ FACTORY DATA
WRITE USER DATA
RESET LENS FILES
#< SCENE >
READ USER DATA
SCENE SEL :1
READ
WRITE
RESET
TITLE1 : ********
1 Perform a menu operation to open the <INITIALIZE> screen.
2 Turn the JOG dial button to move the arrow (cursor) to the WRITE USER DATA item.
< INITIALIZE >
READ FACTORY DATA
# WRITE USER DATA4 RESET LENS FILES
3 When the JOG dial button is pressed, the following message appears.
WRITE?
YES
#
NO
4 Turn the JOG dial button to move the arrow (cursor) to YES, and press the JOG dial button.
The setting data is now written in the user area of the unit’s internal memory.
5 Press the MENU button to exit the menu operations.
Loading the user data
1 Perform a menu operation to open the <SCENE> screen.
2 Turn the JOG dial button to move the arrow (cursor) to the READ USER DATA item.
TITLE2 : ********
TITLE3 : ********
TITLE4 : ********
53