Panasonic BM-ET330 Installation Space and Recognition Range, Keep the Installation Space

Page 19
0 mm {0 in.}

Note: A quantity of acceptable near-infrared ray is 500 µW/cm2 or less.

Places near the light reflection (from a mirror, etc.)

Places where the amount of light is not appropriate for operation

Keep the iris reader away in the following, in addition to the above surroundings.

Vibration (It may cause invalid iris image capturing and recognition. It may also cause other trouble or damage.)

Places whose humidity is not between 30 % and 80 % and whose temperature is not between 0 °C and 40 °C {between 32 °F and 104 °F}

If the iris reader is located in an area exceeding these ranges, it may cause damage or a malfunction.

Noise (for example, places near air conditioners or ventilators)

Electricity

When objects made of glass or acrylic, etc. are located between an iris reader and a user, enrollment or recognition may fail due to the light refraction, light reflection, or sensor malfunction.

Installation Space and Recognition Range

Keep the Installation Space.

The installation space described in the following illustrations is required.

Note: The height of the iris reader, shown in the figure, is a recommendation. The centre of the optical axis and upside/down- side limit of the eye position will differ depending on the installation height.

Top View

Side View

Keep this area

free

400 mm {16 in.}

 

 

from obstructions

400 mm {16 in.}

 

 

 

 

 

 

 

 

400 mm {16 in.}

 

700 mm {28 in.}

 

 

 

 

 

 

 

 

 

 

 

 

1 100 mm {43 in.}

 

 

 

 

 

 

 

 

 

Check the Capturing Range.

If the height of the iris reader is 1 300 mm {54.3 in.} as described in the previous "Side View" illustration, the recog- nition range will become as follows.

Note: If your eye position is higher than the upside limit, bend down. If your eye position is lower than the down- side limit, get on a pedestal, etc.

Keep this area free

700 mm {28 in.}

 

 

 

from obstructions

 

 

 

 

{28in.}

ofHeightthe iris reader

mm3001 {51 in.} or more

 

400 mm {16 in.}

700 mm {28 in.}

(recommended)

1 100 mm {43 in.}

 

700mm

 

 

 

Floor

 

 

 

 

1 710 mm

 

 

 

 

{67.3 in.}

 

 

Side View

 

Upside limit of

 

 

 

the eye position

 

 

 

35°

1 480 mm {58.3 in.}

 

 

 

—15°

Centre of optical axis

 

 

 

(Recommended

 

 

 

 

 

 

 

 

installation height)

 

 

 

 

1 380 mm

 

 

 

 

{54.3 in.}

 

 

 

 

Downside limit of

 

 

 

 

the eye position

 

 

 

300 mm {12 in.}

400 mm {15.7 in.}

1 300 mm {54.3 in.}

11 mm {0.43 in.}

Bottom of

the iris reader unit

19

Image 19
Contents Operating Instructions English Version Important Safety Instructions Trademarks and Registered Trademarks Limitation of LiabilityContents As a recognition iris reader for iris recognition PrefaceBuilt-in video surveillance camera FeaturesAccess control system can be composed Supporting a common access control interfaceGeneral Safety Requirement PrecautionsTo avoid fire or personal injury Settings of this appliance are configured by the iris server Document Convention Notification about this Document Front View External ViewMounting hook hole Rear tamper detection switchRear View Internal ViewConnection terminal Specifications of RS-485 Connectors for Card Reader Accept Specifications of Alarm Output ConnectorsDescription about the Connection Example Installation and ConnectionsCable Preparation Notification about the Installation SitePreparation Preparing the Necessary ItemsKeep the Installation Space Installation Space and Recognition RangeCheck the Capturing Range Wall InstallationAttach the LAN cable to the LAN connector If you are wearing contact lenses Instructions for Proper Enrollment and RecognitionStand where you can see the iris reader from the front side How to Position Your Eyes in the MirrorYes Make sure that you can see both eyes in the mirror Hold the tilt handles at the sides of the front panelCases of Enrollment/Recognition Failure If You are Wearing an Eyepatch, etcStart iris image capturing How to Carry out EnrollmentStand Sit down in front of the iris reader If you are wearing glasses/sunglasses, take them offResult is output 64 ft. from the iris reader How to Carry out RecognitionRecognition by an Iris Reader only Move your face so as your eyes are positioned within 50 cmDuring capturing, open your eyes widely Pass a card through the card reader Recognition by an Iris Reader and a Card ReaderVoice guidance Rejectaccept When Enrollment/Recognition Becomes Invalid TroubleshootingCases of Enrollment/Recognition Failure Before Requesting for RepairProblem Check item Remedy Function SpecificationsGeneral Input/OutputStandard Accessories Osaka, Japan

BM-ET330 specifications

The Panasonic BM-ET330 is a state-of-the-art electronic message board designed to meet the modern demands of communication in various professional environments. This device seamlessly combines functionality and advanced technology, making it an ideal solution for businesses, educational institutions, and public spaces.

One of the standout features of the BM-ET330 is its high-resolution display. The screen ensures that messages are clear and easy to read from a distance, making it perfect for capturing attention in busy areas. With vibrant colors and sharp text, users can convey information effectively and attractively.

The BM-ET330 employs cutting-edge LED technology, allowing for significant energy savings compared to traditional displays. This environmentally friendly design not only lowers operational costs but also reduces the device's carbon footprint. The long lifespan of LED components further enhances its value, as users can expect years of reliable service without the need for frequent replacements.

Another notable aspect of the BM-ET330 is its user-friendly interface. The device supports intuitive navigation, allowing users to create, edit, and manage messages effortlessly. Whether it's a promotional announcement, schedule information, or directional signage, the functionality of the BM-ET330 makes it easy to keep communication up to date.

Connectivity is also a key characteristic of the BM-ET330. It offers multiple connection options, including USB, Ethernet, and wireless capabilities. This versatility allows users to upload content and updates from various devices, ensuring that information can be shared quickly and efficiently.

Moreover, the BM-ET330 includes robust scheduling features. Users can automate messages to display at specific times or dates, making it a highly efficient tool for ongoing communication needs. This can be especially beneficial for businesses looking to promote special offers, announce events, or provide timely information to customers and employees alike.

In conclusion, the Panasonic BM-ET330 is a remarkable electronic message board that stands out due to its high-quality display, energy-efficient LED technology, user-friendly interface, and versatile connectivity options. Its scheduling features further enhance its applicability for a variety of communication needs, making it an excellent investment for anyone looking to modernize their messaging system.