Panasonic BM-ET330 operating instructions How to Position Your Eyes in the Mirror, Yes

Page 23

OPERATING PROCEDURES (INSTRUCTIONS FOR IRIS READER USERS)

This section explains how to use the iris reader, enroll the iris data in the iris server, and recognize yourself with a recognition iris reader in the following order.

• How to position your eyes in the mirror

This is a fundamental operating procedure. Please read here before enrollment and recognition to facilitate the operating procedures.

• How to carry out enrollment

For iris recognition, you need to make the iris reader capture your iris image and enroll your iris data in the iris server. This procedure explains how to enroll the iris data in the iris server using the iris reader. Follow the direction of system administrators or operators when you carry out iris data enrollment.

• How to carry out recognition

This procedure explains how to recognize yourself with the iris reader after enrollment.

• How to recognize yourself with the iris reader and a card reader

This procedure explains how to recognize yourself with the iris reader and a card reader after enrollment.

How to Position Your Eyes in the Mirror

This iris reader captures the iris data of both eyes at one time. If the eyes are not positioned within the capturing range, enrollment/recognition will be invalid. Before enrollment/recognition, you (the user) should stand in front of the iris reader as follows and adjust your eye position. Even when you carry out enrollment/recognition while sitting, you should adjust your eye position in the same way.

Note: If your eye position is higher than the upside limit, bend down. If your eye position is lower than the upside limit, get on a pedestal, etc.

1.Stand where you can see the iris reader from the front side.

Stand where you can hold the tilt handles with your arms bent moderately. If you are standing within the recognition range, an ellipse symbol will appear at the centre of the mirror.

The recognition range is within approx. 30 cm to 40 cm {0.98 ft. to 1.32 ft.} away from the iris read-

1er.

The recognition area differs depending on users. However, the approximate recognition area is where you can stand holding the tilt handles with your arms bent moderately.

 

 

 

Di

st

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

th

 

 

an

ce

 

 

 

 

 

 

 

 

 

 

 

 

 

e e

 

 

 

bet

 

 

 

 

 

 

 

 

 

a

 

 

yes

 

 

we

en

 

 

ppr

 

an

 

 

 

{

0

ox.

3

 

d mi

 

 

 

 

 

 

0

 

 

 

r

r

 

 

 

 

.

98

 

f

 

 

 

 

c

m

t

 

 

 

 

or

:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

t.

t

o 1.

 

 

 

o

40

 

 

 

 

 

 

 

 

 

 

32 f

cm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

t.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

}

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

35°

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15°

23

Image 23
Contents Operating Instructions English Version Important Safety Instructions Trademarks and Registered Trademarks Limitation of LiabilityContents As a recognition iris reader for iris recognition PrefaceBuilt-in video surveillance camera FeaturesAccess control system can be composed Supporting a common access control interfaceTo avoid fire or personal injury PrecautionsGeneral Safety Requirement Settings of this appliance are configured by the iris server Document Convention Notification about this Document Front View External ViewMounting hook hole Rear tamper detection switchRear View Internal ViewConnection terminal Specifications of RS-485 Connectors for Card Reader Accept Specifications of Alarm Output ConnectorsDescription about the Connection Example Installation and ConnectionsCable Preparation Notification about the Installation SitePreparation Preparing the Necessary ItemsCheck the Capturing Range Installation Space and Recognition RangeKeep the Installation Space Wall InstallationAttach the LAN cable to the LAN connector If you are wearing contact lenses Instructions for Proper Enrollment and RecognitionYes How to Position Your Eyes in the MirrorStand where you can see the iris reader from the front side Make sure that you can see both eyes in the mirror Hold the tilt handles at the sides of the front panelCases of Enrollment/Recognition Failure If You are Wearing an Eyepatch, etcStart iris image capturing How to Carry out EnrollmentStand Sit down in front of the iris reader If you are wearing glasses/sunglasses, take them offResult is output 64 ft. from the iris reader How to Carry out RecognitionRecognition by an Iris Reader only Move your face so as your eyes are positioned within 50 cmDuring capturing, open your eyes widely Voice guidance Recognition by an Iris Reader and a Card ReaderPass a card through the card reader Rejectaccept When Enrollment/Recognition Becomes Invalid TroubleshootingCases of Enrollment/Recognition Failure Before Requesting for RepairProblem Check item Remedy Function SpecificationsGeneral Input/OutputStandard Accessories Osaka, Japan

BM-ET330 specifications

The Panasonic BM-ET330 is a state-of-the-art electronic message board designed to meet the modern demands of communication in various professional environments. This device seamlessly combines functionality and advanced technology, making it an ideal solution for businesses, educational institutions, and public spaces.

One of the standout features of the BM-ET330 is its high-resolution display. The screen ensures that messages are clear and easy to read from a distance, making it perfect for capturing attention in busy areas. With vibrant colors and sharp text, users can convey information effectively and attractively.

The BM-ET330 employs cutting-edge LED technology, allowing for significant energy savings compared to traditional displays. This environmentally friendly design not only lowers operational costs but also reduces the device's carbon footprint. The long lifespan of LED components further enhances its value, as users can expect years of reliable service without the need for frequent replacements.

Another notable aspect of the BM-ET330 is its user-friendly interface. The device supports intuitive navigation, allowing users to create, edit, and manage messages effortlessly. Whether it's a promotional announcement, schedule information, or directional signage, the functionality of the BM-ET330 makes it easy to keep communication up to date.

Connectivity is also a key characteristic of the BM-ET330. It offers multiple connection options, including USB, Ethernet, and wireless capabilities. This versatility allows users to upload content and updates from various devices, ensuring that information can be shared quickly and efficiently.

Moreover, the BM-ET330 includes robust scheduling features. Users can automate messages to display at specific times or dates, making it a highly efficient tool for ongoing communication needs. This can be especially beneficial for businesses looking to promote special offers, announce events, or provide timely information to customers and employees alike.

In conclusion, the Panasonic BM-ET330 is a remarkable electronic message board that stands out due to its high-quality display, energy-efficient LED technology, user-friendly interface, and versatile connectivity options. Its scheduling features further enhance its applicability for a variety of communication needs, making it an excellent investment for anyone looking to modernize their messaging system.