Panasonic BM-ET330 How to Carry out Recognition, Recognition by an Iris Reader only

Page 28

How to Carry out Recognition

The following is how to control the iris reader when a user (you), whose iris data has been enrolled in the iris server, carries out recognition. This document will explain about:

Recognition by an iris reader only

Recognition by an iris reader and a card reader

Notes:

To carry out the recognition by an iris reader only, your iris data needs to have been sent to recognition iris readers, enrolled in the iris server, or written into a card. If your iris data has not been enrolled, refer to system administrators for enrollment.

Depending on the settings by the system administrators, voice guidance (voice guidance and/or shutter sound) may not be output.

Recognition by an Iris Reader only

 

Stand (Sit down) in front of the iris reader.

1

Follow the directions by system administrators or operators.

 

Move your face so as your eyes are positioned within 50 cm

 

{1.64 ft.} from the iris reader.

2

• The voice guidance will say, "Please look into the mirror."

• The guide indicator or voice guidance will start.

 

 

 

 

 

3

Position your eyes in the mirror by referring to " How to Position Your Eyes in the Mirror" (pp. 23 to

25).

 

 

 

 

Move your position slowly by following the guide indicator or voice guidance.

• When the distance between the iris reader and you is too great, the voice guidance will say, "Please move a little closer."

• When the distance between the iris reader and you is too short, the voice guidance will say, "Please move back a little."

4

• When your position is right-of-centre, the voice guidance will say,

 

 

"Please move to the left a little."

 

• When your position is left-of-centre, the voice guidance will say,

 

"Please move to the right a little."

 

During the guidance, the near-infrared light will blink.

 

Keep your eyes opened widely during the guidance.

28

Image 28
Contents Operating Instructions English Version Important Safety Instructions Limitation of Liability Trademarks and Registered TrademarksContents Preface As a recognition iris reader for iris recognitionFeatures Access control system can be composedSupporting a common access control interface Built-in video surveillance cameraGeneral Safety Requirement PrecautionsTo avoid fire or personal injury Settings of this appliance are configured by the iris server Document Convention Notification about this Document External View Front ViewRear tamper detection switch Rear ViewInternal View Mounting hook holeConnection terminal Specifications of RS-485 Connectors for Card Reader Specifications of Alarm Output Connectors AcceptInstallation and Connections Description about the Connection ExampleNotification about the Installation Site PreparationPreparing the Necessary Items Cable PreparationKeep the Installation Space Installation Space and Recognition RangeCheck the Capturing Range Installation WallAttach the LAN cable to the LAN connector Instructions for Proper Enrollment and Recognition If you are wearing contact lensesStand where you can see the iris reader from the front side How to Position Your Eyes in the MirrorYes Hold the tilt handles at the sides of the front panel Make sure that you can see both eyes in the mirrorIf You are Wearing an Eyepatch, etc Cases of Enrollment/Recognition FailureHow to Carry out Enrollment Stand Sit down in front of the iris readerIf you are wearing glasses/sunglasses, take them off Start iris image capturingResult is output How to Carry out Recognition Recognition by an Iris Reader onlyMove your face so as your eyes are positioned within 50 cm 64 ft. from the iris readerDuring capturing, open your eyes widely Pass a card through the card reader Recognition by an Iris Reader and a Card ReaderVoice guidance Rejectaccept Troubleshooting When Enrollment/Recognition Becomes InvalidBefore Requesting for Repair Cases of Enrollment/Recognition FailureProblem Check item Remedy Specifications GeneralInput/Output FunctionStandard Accessories Osaka, Japan

BM-ET330 specifications

The Panasonic BM-ET330 is a state-of-the-art electronic message board designed to meet the modern demands of communication in various professional environments. This device seamlessly combines functionality and advanced technology, making it an ideal solution for businesses, educational institutions, and public spaces.

One of the standout features of the BM-ET330 is its high-resolution display. The screen ensures that messages are clear and easy to read from a distance, making it perfect for capturing attention in busy areas. With vibrant colors and sharp text, users can convey information effectively and attractively.

The BM-ET330 employs cutting-edge LED technology, allowing for significant energy savings compared to traditional displays. This environmentally friendly design not only lowers operational costs but also reduces the device's carbon footprint. The long lifespan of LED components further enhances its value, as users can expect years of reliable service without the need for frequent replacements.

Another notable aspect of the BM-ET330 is its user-friendly interface. The device supports intuitive navigation, allowing users to create, edit, and manage messages effortlessly. Whether it's a promotional announcement, schedule information, or directional signage, the functionality of the BM-ET330 makes it easy to keep communication up to date.

Connectivity is also a key characteristic of the BM-ET330. It offers multiple connection options, including USB, Ethernet, and wireless capabilities. This versatility allows users to upload content and updates from various devices, ensuring that information can be shared quickly and efficiently.

Moreover, the BM-ET330 includes robust scheduling features. Users can automate messages to display at specific times or dates, making it a highly efficient tool for ongoing communication needs. This can be especially beneficial for businesses looking to promote special offers, announce events, or provide timely information to customers and employees alike.

In conclusion, the Panasonic BM-ET330 is a remarkable electronic message board that stands out due to its high-quality display, energy-efficient LED technology, user-friendly interface, and versatile connectivity options. Its scheduling features further enhance its applicability for a variety of communication needs, making it an excellent investment for anyone looking to modernize their messaging system.