Panasonic BM-ET330 Notification about the Installation Site, Cable Preparation

Page 18

Preparation

Prepare the following items before the installation. The necessary items and their lengths differ depending on situation.

Preparing the Necessary Items

Item

Item number/Recommended type

Use

 

 

 

Power cable

UL style 1015 (AWG 14-18) or

Necessary when supplying power from

 

equivalents

the external power-supply device to

 

Maximum distance: 10 m {32.8 ft.}

the iris reader

 

Solder both ends of the cable with M3

 

 

 

 

screw clamp terminals.

 

 

 

Coaxial cable

UL Listed NEC type CM or

For connection between an external

 

CL2, RG-6/U type

video-input device and the iris reader

 

Recommended distance: 20 m

Connect both ends with BNC plugs.

 

{65.6 ft.} or less

 

 

 

 

LAN cable

UL style 1666, CSA-FT4 or equivalents

Necessary for communication between

 

10 Base-T/100 Base-TX (Category 5)*1

the iris readers and iris server

 

 

 

 

 

Anchor bolt

M6

Required when installing the mounting

 

 

bracket over the wall with the unicorn

 

 

anchor

 

 

 

*1 Only cables without connector covers are usable.

Notes:

When you use the alarm output and Wiegand terminals, you need optional cables suited for the connectors of external devices. Use the UL style 1571 or equivalents, AWG 22 - 16 wire.

When you use the RS-485 terminals, you need optional twisted pair cables (AWG 22 - 16) suited for the connectors of external devices.

It is recommended to use shielded twisted pair cables for the open collector output connectors (!6- !9). (GND @0is to be paired.)*2

*2 !6, !9, and @0are Pin No. Refer to p.16.

Cable Preparation

Power cable (with sealing)

25 mm {1 in.} or less

Notification about the Installation Site

This iris reader is limited to indoor use.

Near-infrared light (contained in sunlight, incandescent light and halogen light) are used for iris image capturing by the iris reader. If the iris reader is installed in a place which receives this light directly, it may cause invalid iris data enrollment/recognition, as the iris reader cannot capture iris images properly.

Keep the iris reader away from the following. Otherwise, light may affect on the iris reader.

Outdoor places

Direct sunlight or light reflection

Incandescent or halogen lighting

Places where the iris reader or the user's eyes are directly exposed to light

18

Image 18
Contents Operating Instructions English Version Important Safety Instructions Limitation of Liability Trademarks and Registered TrademarksContents Preface As a recognition iris reader for iris recognitionSupporting a common access control interface FeaturesAccess control system can be composed Built-in video surveillance cameraPrecautions General Safety RequirementTo avoid fire or personal injury Settings of this appliance are configured by the iris server Document Convention Notification about this Document External View Front ViewInternal View Rear tamper detection switchRear View Mounting hook holeConnection terminal Specifications of RS-485 Connectors for Card Reader Specifications of Alarm Output Connectors AcceptInstallation and Connections Description about the Connection ExamplePreparing the Necessary Items Notification about the Installation SitePreparation Cable PreparationInstallation Space and Recognition Range Keep the Installation SpaceCheck the Capturing Range Installation WallAttach the LAN cable to the LAN connector Instructions for Proper Enrollment and Recognition If you are wearing contact lensesHow to Position Your Eyes in the Mirror Stand where you can see the iris reader from the front sideYes Hold the tilt handles at the sides of the front panel Make sure that you can see both eyes in the mirrorIf You are Wearing an Eyepatch, etc Cases of Enrollment/Recognition FailureIf you are wearing glasses/sunglasses, take them off How to Carry out EnrollmentStand Sit down in front of the iris reader Start iris image capturingResult is output Move your face so as your eyes are positioned within 50 cm How to Carry out RecognitionRecognition by an Iris Reader only 64 ft. from the iris readerDuring capturing, open your eyes widely Recognition by an Iris Reader and a Card Reader Pass a card through the card readerVoice guidance Rejectaccept Troubleshooting When Enrollment/Recognition Becomes InvalidBefore Requesting for Repair Cases of Enrollment/Recognition FailureProblem Check item Remedy Input/Output SpecificationsGeneral FunctionStandard Accessories Osaka, Japan

BM-ET330 specifications

The Panasonic BM-ET330 is a state-of-the-art electronic message board designed to meet the modern demands of communication in various professional environments. This device seamlessly combines functionality and advanced technology, making it an ideal solution for businesses, educational institutions, and public spaces.

One of the standout features of the BM-ET330 is its high-resolution display. The screen ensures that messages are clear and easy to read from a distance, making it perfect for capturing attention in busy areas. With vibrant colors and sharp text, users can convey information effectively and attractively.

The BM-ET330 employs cutting-edge LED technology, allowing for significant energy savings compared to traditional displays. This environmentally friendly design not only lowers operational costs but also reduces the device's carbon footprint. The long lifespan of LED components further enhances its value, as users can expect years of reliable service without the need for frequent replacements.

Another notable aspect of the BM-ET330 is its user-friendly interface. The device supports intuitive navigation, allowing users to create, edit, and manage messages effortlessly. Whether it's a promotional announcement, schedule information, or directional signage, the functionality of the BM-ET330 makes it easy to keep communication up to date.

Connectivity is also a key characteristic of the BM-ET330. It offers multiple connection options, including USB, Ethernet, and wireless capabilities. This versatility allows users to upload content and updates from various devices, ensuring that information can be shared quickly and efficiently.

Moreover, the BM-ET330 includes robust scheduling features. Users can automate messages to display at specific times or dates, making it a highly efficient tool for ongoing communication needs. This can be especially beneficial for businesses looking to promote special offers, announce events, or provide timely information to customers and employees alike.

In conclusion, the Panasonic BM-ET330 is a remarkable electronic message board that stands out due to its high-quality display, energy-efficient LED technology, user-friendly interface, and versatile connectivity options. Its scheduling features further enhance its applicability for a variety of communication needs, making it an excellent investment for anyone looking to modernize their messaging system.