Panasonic BM-ET330 operating instructions Specifications, General, Input/Output, Function

Page 35

SPECIFICATIONS

General

 

 

Power source *1:

12 V DC/24 V AC

Power consumption:

15 W

Ambient operating temperature:

0

°C to +40 °C {32 °F to 104 °F}

Ambient operating humidity:

30 % to 80 %

Dimensions:

212 mm (W) x 216 mm (H) x 55 mm (D) {8.35 in. (W) x 8.50 in. (H) x 2.16 in. (D)}

Weight:

2.1 kg {4.9 lbs.} (this iris reader only)

 

2.4 kg {5.3 lbs.} (with the mounting bracket)

Interface:

Wiegand, RS-485

Network:

10 Base-T/100 Base-TX (Auto negotiation) *2

Network protocol:

TCP/IP

Available card reader:

RWK400 (Manufactured by HID Corporation)

Input/Output

 

 

Wiegand power (card reader):

5

V DC, 100 mA max.

Wiegand DATA0 (card reader):

0

V to 5 V DC, 24 mA max., Active low

Wiegand DATA1 (card reader):

0

V to 5 V DC, 24 mA max., Active low

Wiegand power (access control panel):

5

V DC (No connection available)

Wiegand DATA0 (access control panel):

0

V to 5 V DC, 24 mA max., Active low

Wiegand DATA1 (access control panel):

0

V to 5 V DC, 24 mA max., Active low

Wiegand ACCEPT-LED (access control panel): 0

V to 5 V, 24 mA (Max), Active low, Pulse width: 200 ms or more

Wiegand REJECT-LED (access control panel):

0

V to 5 V, 24 mA (Max), Active low, Pulse width: 200 ms or more

RS-485 (A), (B) (card reader):

Differential input: ± 0.2 V or more, Differential output: ± 2 V or more

 

(When termination is ON)

RS-485 (A), (B) (access control panel):

Differential input: ± 0.2 V or more, Differential output: ± 2 V or more

 

(When termination is ON)

Alarm input1 (recognition start/buzzer):

0

V to 5 V, 24 mA (Max), Active low, Pulse width: 200 ms or more

Recognition result output1 (ACCEPT):

Open collector output, Normally Open, Active low, Pulse width: 0.1 s to 60 s,

 

24 V DC, 24 mA

Recognition result output2 (REJECT):

Open collector output, Normally Open, Active low, Pulse width: 0.1 s to 60 s,

 

24 V DC, 24 mA

Alarm output1 (power status):

Open collector output, Normally Close (Low level), 24 V DC, 24 mA

Alarm output2 (tamper detection):

Open collector output, Normally Open, Active low, 24 V DC, 24 mA

Video surveillance camera output:

1

V [P-P] PAL composite 75 Ω BNC connector

Function

 

 

Iris recognition time:

Approx. 1 seconds (After iris image capturing until the recognition result is output) *3

 

Approx. 10 seconds

 

(Server certification. After iris image capturing until the recognition result is output) *3

Eye image capturing range:

Approx. 30 cm to 40cm {0.98 ft. to 1.32 ft.} between the eyes and the mirror

Total number of users enrolled *4

 

 

BM-ET330E:

1

000 users max.

Iris server:

5

025 users max.

Voice guidance:

14 languages supported (Japanese, English, German, French, Spanish, Italian,

 

Russian, Chinese, Korean, Portuguese, Turkish, Arabic, Dutch, and Swedish)

 

Mute, Simple (Shutter sound and recognition result), and Full (voice guidance, shut-

 

ter sound, and recognition result) selectable

Guide indicator:

Front, Back, Left, and Right

Live indicator:

Blinking, On, and Off selectable

Angular field view

 

 

(video surveillance camera):

Horizontal: 115 °, Vertical: 85° (Fixed)

Security function:

Tamper detection switch

 

Iris data encryption

Note: Refer to the next page for the explanations of *1 to *4.

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Operating Instructions English Version Important Safety Instructions Trademarks and Registered Trademarks Limitation of LiabilityContents As a recognition iris reader for iris recognition PrefaceBuilt-in video surveillance camera FeaturesAccess control system can be composed Supporting a common access control interfaceTo avoid fire or personal injury PrecautionsGeneral Safety Requirement Settings of this appliance are configured by the iris server Document Convention Notification about this Document Front View External ViewMounting hook hole Rear tamper detection switchRear View Internal ViewConnection terminal Specifications of RS-485 Connectors for Card Reader Accept Specifications of Alarm Output ConnectorsDescription about the Connection Example Installation and ConnectionsCable Preparation Notification about the Installation SitePreparation Preparing the Necessary ItemsCheck the Capturing Range Installation Space and Recognition RangeKeep the Installation Space Wall InstallationAttach the LAN cable to the LAN connector If you are wearing contact lenses Instructions for Proper Enrollment and RecognitionYes How to Position Your Eyes in the MirrorStand where you can see the iris reader from the front side Make sure that you can see both eyes in the mirror Hold the tilt handles at the sides of the front panelCases of Enrollment/Recognition Failure If You are Wearing an Eyepatch, etcStart iris image capturing How to Carry out EnrollmentStand Sit down in front of the iris reader If you are wearing glasses/sunglasses, take them offResult is output 64 ft. from the iris reader How to Carry out RecognitionRecognition by an Iris Reader only Move your face so as your eyes are positioned within 50 cmDuring capturing, open your eyes widely Voice guidance Recognition by an Iris Reader and a Card ReaderPass a card through the card reader Rejectaccept When Enrollment/Recognition Becomes Invalid TroubleshootingCases of Enrollment/Recognition Failure Before Requesting for RepairProblem Check item Remedy Function SpecificationsGeneral Input/OutputStandard Accessories Osaka, Japan

BM-ET330 specifications

The Panasonic BM-ET330 is a state-of-the-art electronic message board designed to meet the modern demands of communication in various professional environments. This device seamlessly combines functionality and advanced technology, making it an ideal solution for businesses, educational institutions, and public spaces.

One of the standout features of the BM-ET330 is its high-resolution display. The screen ensures that messages are clear and easy to read from a distance, making it perfect for capturing attention in busy areas. With vibrant colors and sharp text, users can convey information effectively and attractively.

The BM-ET330 employs cutting-edge LED technology, allowing for significant energy savings compared to traditional displays. This environmentally friendly design not only lowers operational costs but also reduces the device's carbon footprint. The long lifespan of LED components further enhances its value, as users can expect years of reliable service without the need for frequent replacements.

Another notable aspect of the BM-ET330 is its user-friendly interface. The device supports intuitive navigation, allowing users to create, edit, and manage messages effortlessly. Whether it's a promotional announcement, schedule information, or directional signage, the functionality of the BM-ET330 makes it easy to keep communication up to date.

Connectivity is also a key characteristic of the BM-ET330. It offers multiple connection options, including USB, Ethernet, and wireless capabilities. This versatility allows users to upload content and updates from various devices, ensuring that information can be shared quickly and efficiently.

Moreover, the BM-ET330 includes robust scheduling features. Users can automate messages to display at specific times or dates, making it a highly efficient tool for ongoing communication needs. This can be especially beneficial for businesses looking to promote special offers, announce events, or provide timely information to customers and employees alike.

In conclusion, the Panasonic BM-ET330 is a remarkable electronic message board that stands out due to its high-quality display, energy-efficient LED technology, user-friendly interface, and versatile connectivity options. Its scheduling features further enhance its applicability for a variety of communication needs, making it an excellent investment for anyone looking to modernize their messaging system.
Top Page Image Contents